SONG CHUAN
155
SCLD/SCLB
Specification
Contact material AgNi alloy
Contact resistance (1)
Operate time (1) 25 ms Max.
Release time (1) 25 ms Max.
Operating extremes 10焍55Hz , amplitude 1.0 mm
Vibration resistance
Damage limits 10焍55Hz , amplitude 1.0 mm
Operating extremes 20G
Shock resistance
Damage limits 100G
10,000,000 ops.
Mechanical (frequency 18,000 ops./hr)
Life expectancy
100,000 ops.
Electrical (frequency 1,800 ops./hr)
Operating ambient temperature -25焍+70°C (no freezing)
Weight Approx. 35 g (LD)ˣ32 g (LB)
50mΩ Max. (at 1A/6VDC by 4-wire resistance measurement)
Tolerance range
Humidity, %RH
(Avoid
freezing when
used at
temperatures
lower than
0°C)
(Avoid
condensation
when used at
temperatures
higher than 0°C )
Temperature, °C
Note 烉(1) Initial value. Operate and release time excluding contact bounce.
(2) Unless otherwise specified, all tests are under room temperature and humidity.
(3) Consider the heat of PCB is necessary, please check the actual condition of PCB.
(4) Do not use the relay exceeding the coil rating, contact rating and life expectancy, or this may cause
the risk of overheating.
(5) To assure optimum performance, avoid the relay from dropping, hitting, or other unnecessary shocks.
(6) Do not switch the contacts without any load as the contact resistance may become increased rapidly.
(7) Flux tight version is recommended. If there is cleaning process and sealed type is selected,
the vent-hole should be removed after the process.
(8) Use suitable harnesses and bus bars according to the current as below︰
5A type︰Min. 2.0 mm
(9) Usage, transport and storage conditions
焍+70°C
within the range indicated in the graph below.
(10) Please contact Song Chuan for the detailed information.
2