© Semiconductor Components Industries, LLC, 2014
October, 2014 − Rev. P2
1Publication Order Number:
PB_NOIP1SN1300A/D
NOIP1SN1300A,
NOIP1SN0500A,
NOIP1SN0300A
PYTHON 0.3/0.5/1.3 Megapixel
Global Shutter CMOS
Image Sensors
Features
•SXGA: 1280 x 1024 Active Pixels, 1/2” Optical Format
SVGA: 800 x 600 Active Pixels, 1/3.6” Optical Format
VGA: 640 x 480 Active Pixels, 1/4” Optical Format
•4.8 mm x 4.8 mm Low Noise Global Shutter Pixels with
In-pixel CDS
•Monochrome (SN) or Color (SE)
•Zero ROT Mode Enabling Faster Frame Rate
•Frame Rate at Full Resolution (LVDS)
♦210/175 frames per second @ SXGA (Zero ROT/Normal ROT)
♦560/420 frames per second @ SVGA (Zero ROT/Normal ROT)
♦860/620 frames per second @ VGA (Zero ROT/Normal ROT)
•43 Frames per Second (fps) at Full Resolution (CMOS)
•On-chip 10-bit Analog-to-Digital Converter (ADC)
•8-bit or 10-bit Output Mode
•Four Low Voltage Differential Signaling (LVDS) High Speed
Serial Outputs or Parallel CMOS Output
•Random Programmable Region of Interest (ROI) Readout
•Pipelined and Triggered Global Shutter, Rolling Shutter
•On-chip Fixed Pattern Noise (FPN) Correction
•Serial Peripheral Interface (SPI)
•Automatic Exposure Control (AEC)
•Phase Locked Loop (PLL)
•High Dynamic Range (HDR)
•Dual Power Supply (3.3 V and 1.8 V)
•−40°C to +85°C Operational Temperature Range
•48-pin LCC and Bare Die
•590 mW Power Dissipation (LVDS)
•375 mW Power Dissipation (CMOS)
•These Devices are Pb−Free and are RoHS Compliant
Applications
•Machine Vision
•Motion Monitoring
•Security
•Barcode Scanning (2D)
Description
The Python’s high sensitivity 4.8 mm x 4.8 mm pixels
support low noise “pipelined” and “triggered” global shutter
readout modes. In global shutter mode, the sensor supports
correlated double sampling (CDS) readout, reducing noise
and increasing dynamic range.
The sensor has on-chip programmable gain amplifiers and
10-bit A/D converters. The integration time and gain
parameters can be reconfigured without any visible image
artifact. Optionally the on-chip automatic exposure control
loop (AEC) controls these parameters dynamically. The
image’s black level is either calibrated automatically or can
be adjusted by adding a user programmable offset.
A high level of programmability using a four wire serial
peripheral interface enables the user to read out specific
regions of interest. Up to 8 regions can be programmed,
achieving even higher frame rates.
The image data interface of the P1-SN/SE part consists of
four LVDS lanes, facilitating frame rates up to 210 frames
per second in Zero ROT mode. Each channel runs at
720 Mbps. A separate synchronization channel containing
payload information is provided to facilitate the image
reconstruction at the receiving end. The P2-SN/SE part
provides a parallel CMOS output interface at reduced frame
rate.
The PYTHON low resolution family is packaged in a
48-pin LCC package and is available in a monochrome and
color version. For NIR variants, please contact your local
distributor or email us at imagesensors@onsemi.com.
www.onsemi.com
Figure 1. PYTHON 1300 Photograph
NOIP1SN1300A, NOIP1SN0500A, NOIP1SN0300A
http://onsemi.com
2
SPECIFICATIONS
Key Specifications
Table 1. GENERAL SPECIFICATIONS
Parameter Specification
Pixel type In−pixel CDS. Global shutter pixel
architecture
Shutter type Pipelined and triggered global shutter
Frame rate
Zero ROT/Normal
ROT mode
P1−SN/SE:
210/175 fps @ SXGA
560/420 fps @ SVGA
860/620 fps @ VGA
P2−SN/SE: 43 fps
Master clock P1−SN/SE:
72 MHz when PLL is used,
360 MHz (10−bit) / 288 MHz (8−bit)
when PLL is not used
P2−SN/SE: 72 MHz
Windowing 8 Randomly programmable windows.
Normal, sub−sampled and binned
readout modes
ADC resolution 10−bit, 8−bit (Note 1)
LVDS outputs P1−SN/SE: 4/2/1 data + sync + clock
CMOS outputs P2−SN/SE: 10−bit parallel output,
frame_valid, line_valid, clock
Data rate P1−SN/SE:
4 x 720 Mbps (10−bit) /
4 x 576 Mbps (8−bit)
P2−SN/SE: 72 MHz
Power dissipation P1−SN/SE: 590 mW, 10−bit mode
P2−SN/SE: 375 mW
Package type 48−pin LCC
1. The ADC is 11−bit, down−scaled to 10−bit. The PYTHON uses
a larger word−length internally to provide 10−bit on the output.
Table 2. ELECTRO−OPTICAL SPECIFICATIONS
Parameter Specification
Active pixels SXGA: 1280 (H) x 1024 (V)
SVGA: 800 (H) x 600 (V)
VGA: 640 (H) x 480 (V)
Pixel size 4.8 mm x 4.8 mm
Conversion gain 0.096 LSB10/e−
140 mV/e−
Dark temporal noise < 9e− (Normal ROT, 1x gain)
< 7e− (Normal ROT, 2x gain)
Responsivity at 550 nm 7.7 V/lux.s
Parasitic Light
Sensitivity (PLS)
<1/8000
Full Well Charge 10000 e−
Quantum Efficiency at
550 nm
56%
Pixel FPN < 0.5 LSB10
PRNU < 10 LSB10
MTF 68% @ 535 nm − X−dir & Y−dir
PSNL at 20°C120 LSB10/s, 1200 e−/s
Dark signal at 20°C5 e−/s, 0.5 LSB10/s
Dynamic Range > 60 dB in global shutter mode
Signal to Noise Ratio
(SNR max)
40 dB
To receive a detailed product data sheet and supporting documentation, visit the CISP Extranet at www.onsemi.com/MyON.
Worldwide Sales and Design Support
ON Semiconductor CMOS Image Sensor Business Unit offers standard and customized CMOS image sensors for consumer
as well as industrial and professional applications. Consumer applications include solutions for fast growing high-speed
machine vision, motion monitoring, medical imaging, intelligent traffic systems, security, and barcode applications. Our
customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic
range, and high sensitivity.
ON Semiconductor maintains a worldwide network of offices, customer service centers, manufacturer’s representatives and
distributors. For more information on image sensors, contact imagesensors@onsemi.com.
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
PB_NOIP1SN1300A/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
