NOIP1SN1300A, NOIP1SN0500A, NOIP1SN0300A PYTHON 0.3/0.5/1.3 Megapixel Global Shutter CMOS Image Sensors www.onsemi.com Features * SXGA: 1280 x 1024 Active Pixels, 1/2" Optical Format SVGA: 800 x 600 Active Pixels, 1/3.6" Optical Format VGA: 640 x 480 Active Pixels, 1/4" Optical Format * 4.8 mm x 4.8 mm Low Noise Global Shutter Pixels with In-pixel CDS * Monochrome (SN) or Color (SE) * Zero ROT Mode Enabling Faster Frame Rate * Frame Rate at Full Resolution (LVDS) 210/175 frames per second @ SXGA (Zero ROT/Normal ROT) 560/420 frames per second @ SVGA (Zero ROT/Normal ROT) 860/620 frames per second @ VGA (Zero ROT/Normal ROT) * 43 Frames per Second (fps) at Full Resolution (CMOS) * On-chip 10-bit Analog-to-Digital Converter (ADC) * 8-bit or 10-bit Output Mode * Four Low Voltage Differential Signaling (LVDS) High Speed Figure 1. PYTHON 1300 Photograph Serial Outputs or Parallel CMOS Output * Random Programmable Region of Interest (ROI) Readout * Pipelined and Triggered Global Shutter, Rolling Shutter * On-chip Fixed Pattern Noise (FPN) Correction The sensor has on-chip programmable gain amplifiers and * Serial Peripheral Interface (SPI) 10-bit A/D converters. The integration time and gain * Automatic Exposure Control (AEC) parameters can be reconfigured without any visible image * Phase Locked Loop (PLL) artifact. Optionally the on-chip automatic exposure control * High Dynamic Range (HDR) loop (AEC) controls these parameters dynamically. The * Dual Power Supply (3.3 V and 1.8 V) image's black level is either calibrated automatically or can be adjusted by adding a user programmable offset. * -40C to +85C Operational Temperature Range A high level of programmability using a four wire serial * 48-pin LCC and Bare Die peripheral interface enables the user to read out specific * 590 mW Power Dissipation (LVDS) regions of interest. Up to 8 regions can be programmed, * 375 mW Power Dissipation (CMOS) achieving even higher frame rates. * These Devices are Pb-Free and are RoHS Compliant The image data interface of the P1-SN/SE part consists of Applications four LVDS lanes, facilitating frame rates up to 210 frames * Machine Vision per second in Zero ROT mode. Each channel runs at 720 Mbps. A separate synchronization channel containing * Motion Monitoring payload information is provided to facilitate the image * Security reconstruction at the receiving end. The P2-SN/SE part * Barcode Scanning (2D) provides a parallel CMOS output interface at reduced frame Description rate. The Python's high sensitivity 4.8 mm x 4.8 mm pixels The PYTHON low resolution family is packaged in a support low noise "pipelined" and "triggered" global shutter 48-pin LCC package and is available in a monochrome and readout modes. In global shutter mode, the sensor supports color version. For NIR variants, please contact your local correlated double sampling (CDS) readout, reducing noise distributor or email us at imagesensors@onsemi.com. and increasing dynamic range. (c) Semiconductor Components Industries, LLC, 2014 October, 2014 - Rev. P2 1 Publication Order Number: PB_NOIP1SN1300A/D NOIP1SN1300A, NOIP1SN0500A, NOIP1SN0300A SPECIFICATIONS Key Specifications Table 1. GENERAL SPECIFICATIONS Parameter Table 2. ELECTRO-OPTICAL SPECIFICATIONS Specification Parameter Pixel type In-pixel CDS. Global shutter pixel architecture Shutter type Pipelined and triggered global shutter Frame rate Zero ROT/Normal ROT mode P1-SN/SE: 210/175 fps @ SXGA 560/420 fps @ SVGA 860/620 fps @ VGA P2-SN/SE: 43 fps Master clock Windowing P1-SN/SE: 72 MHz when PLL is used, 360 MHz (10-bit) / 288 MHz (8-bit) when PLL is not used P2-SN/SE: 72 MHz 8 Randomly programmable windows. Normal, sub-sampled and binned readout modes Specification Active pixels SXGA: 1280 (H) x 1024 (V) SVGA: 800 (H) x 600 (V) VGA: 640 (H) x 480 (V) Pixel size 4.8 mm x 4.8 mm Conversion gain 0.096 LSB10/e- 140 mV/e- Dark temporal noise < 9e- (Normal ROT, 1x gain) < 7e- (Normal ROT, 2x gain) Responsivity at 550 nm 7.7 V/lux.s Parasitic Light Sensitivity (PLS) <1/8000 Full Well Charge 10000 e- Quantum Efficiency at 550 nm 56% Pixel FPN < 0.5 LSB10 PRNU < 10 LSB10 MTF 68% @ 535 nm - X-dir & Y-dir ADC resolution 10-bit, 8-bit (Note 1) LVDS outputs P1-SN/SE: 4/2/1 data + sync + clock CMOS outputs P2-SN/SE: 10-bit parallel output, frame_valid, line_valid, clock Data rate P1-SN/SE: 4 x 720 Mbps (10-bit) / 4 x 576 Mbps (8-bit) P2-SN/SE: 72 MHz PSNL at 20C 120 LSB10/s, 1200 e-/s Dark signal at 20C 5 e-/s, 0.5 LSB10/s Dynamic Range > 60 dB in global shutter mode Power dissipation P1-SN/SE: 590 mW, 10-bit mode P2-SN/SE: 375 mW Signal to Noise Ratio (SNR max) 40 dB Package type 48-pin LCC 1. The ADC is 11-bit, down-scaled to 10-bit. The PYTHON uses a larger word-length internally to provide 10-bit on the output. To receive a detailed product data sheet and supporting documentation, visit the CISP Extranet at www.onsemi.com/MyON. Worldwide Sales and Design Support ON Semiconductor CMOS Image Sensor Business Unit offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications. Consumer applications include solutions for fast growing high-speed machine vision, motion monitoring, medical imaging, intelligent traffic systems, security, and barcode applications. Our customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large dynamic range, and high sensitivity. ON Semiconductor maintains a worldwide network of offices, customer service centers, manufacturer's representatives and distributors. For more information on image sensors, contact imagesensors@onsemi.com. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 2 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative PB_NOIP1SN1300A/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: NOIP1SE1300A-QDI NOIP1SE0500A-QDI NOIP2SE1300A-QDI