EC2-12 F-219 EHT-120-01-F-D-SM-LC EHT-112-01-L-D (2.00 mm) .0787" EHT, EC2 SERIES SHROUDED IDC EJECTOR HEADER Ten standard sizes mate with common 2 mm IDC cable assemblies Mates with: TCSD SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?EHT EJECTOR HEADER CAP Ejector latches (Locks TCSD cable to EHT header) Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes (9.65) .380 (9.65) .380 No. of positions x (2.00) .0787 + (19.89) .783 PROCESSING EC2 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max NO. PINS PER ROW Straight through-hole, right-angle, or surface mount 05, 08, 10, 12, 13, 15, 17, 20, 22, 25 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality 1 EHT FILE NO. E111594 ALSO AVAILABLE (MOQ Required) NO. PINS PER ROW 05, 08, 10, 12, 13, 15, 17, 20, 22, 25 * Other platings PLATING OPTION 01 -F Leave blank for Through-hole -L = Right-angle = Gold flash on post, Matte Tin on tail (4.51) .178 (15.07) .593 (0.51) .020 (0.50) .020 SQ -LC = Locking Clip (-SM only) (Manual placement required) (8.26) .325 (9.53) x .375 (6.02) .237 (8.89) .350 -SM (8.58) .338 -P = Pick & Place Pad (-SM only) (3.05) .120 (2.90) .114 -TR (2.00) .0787 -SR -RA Note: Some lengths, styles and options are non-standard, non-returnable. (Latch removed for clarity) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -K = (6.50 mm) .256" DIA Polyimide Film Pick & Place Pad (-SM only) -P (3.05) .120 (12.19) .480 (9.40) .370 -SR = Strain Relief (Leave Blank for no strain relief) -SM (2.54) .100 01 -"XX" = Surface Mount (7.62) .300 (2.00) .0787 OTHER OPTION = Polarized Position -RA = 10 " (0.25 m) Gold on post, Matte Tin on tail No. of positions x (2.00) .0787 + (13.79) .543 (2.00) .0787 02 TAIL OPTION D All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (1.52) .060 = Tape & Reel (-SM only)