SPECIFICATION CONTROL DRAWING
305 Constitution Drive
Menlo Park, CA 94025, USA
TITLE: SOLDERSHIELD DEVICE
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets. DOCUMENT NO.: B-070-19-XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
D020317 REPLACES:
D000564
DRAWN BY:
M. FORONDA DATE:
6-Aug-02 PROD. REV.
SEE TABLE DOC ISSUE:
2 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check with the web for the latest revision.
Product Rev. Product Dimensions Cable Dimensions
Product
Name øA
min L
max øE
min øG
max M±1.0
(M±0.040)
B-070-19-04 G 10.0 (0.395) 39.0 (0.535) 4.0 (0.155) 10.0 (0.395) 10.0 (0.395)
B-070-19-05 F 11.3 (0.445) 53.0 (2.085) 5.0 (0.200) 11.3 (0.445) 14.0 (0.550)
B-070-19-06 F 13.5 (0.530) 53.0 (2.085) 6.0 (0.235) 13.5 (0.530) 14.0 (0.550)
B-070-19-07 D 15.0 (0.591) 53.0 (2.085) 7.0 (0.276) 15.0 (0.591) 14.0 (0.550)
B-070-19-08 E 16.5 (0.650) 53.0 (2.085) 8.0 (0.315) 16.5 (0.650) 14.0 (0.550)
B-070-19-09 F 18.0 (0.7.9) 65.0 (2.560) 9.0 (0.354) 18.0 (0.709) 16.0 (0.630)
B-070-19-10 F 20.0 (0.785) 68.0 (2.675) 10.0 (0.395) 20.0 (0.785) 16.0 (0.630)
B-070-19-11 H 23.0 (0.906) 68.0 (2.675) 11.5 (0.453) 23.0 (0.906) 16.0 (0.630)
B-070-19-13 G 26.0 (1.025) 66.0 (2.600) 14.5 (0.570) 26.0 (1.025) 16.0 (0.630)
B-070-19-14 E 30.0 (1.181) 81.0 (3.190) 18.5 (0.728) 30.0 (1.181) 20.0 (0.785)
B-070-19-16 E 35.5 (1.400) 81.0 (3.190) 19.5 (0.765) 35.5 (1.400) 20.0 (0.785)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin high density.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. SHIELD: Solder impregnated, flux coated, tin plated copper braid.
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
APPLICATION
1. These controlled soldering devices are designed for shield termination of a cable having an insulation rated for
at least +125°C.
2. Temperature range: -55°C to +135°C.
3. For application tooling, contact your local Tyco Electronics/Raychem technical service.
For best results, prepare
the cable as shown:
