INTEGRATED CIRCUITS 74LVT16244B 3.3 V LVT 16-bit buffer/driver (3-State) Product data Supersedes data of 1998 Oct 07 2002 Oct 31 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) FEATURES 74LVT16244B DESCRIPTION * 16-bit bus interface * 3-State buffers * Output capability: +64 mA / -32 mA * TTL input and output switching levels * Input and output interface capability to systems at 5 V supply * Bus-hold data inputs eliminate the need for external pull-up The 74LVT16244B is a high-performance BiCMOS product designed for VCC operation at 3.3 V. This device is a 16-bit buffer and line driver featuring non-inverting 3-State bus outputs. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. resistors to hold unused inputs * Live insertion/extraction permitted * Power-up 3-State * No bus current loading when output is tied to 5 V bus * Latch-up protection exceeds 500 mA per JEDEC Std 17 * ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model QUICK REFERENCE DATA SYMBOL CONDITIONS Tamb = 25 C PARAMETER tPLH tPHL Propagation delay nAx to nYx CL = 50 pF; VCC = 3.3 V CIN TYPICAL UNIT 1.8 ns Input capacitance nOE VI = 0 V or 3.0 V 3 pF COUT Output capacitance Outputs disabled; VO = 0 V or 3.0 V 9 pF ICCZ Total supply current Outputs disabled; VCC = 3.6 V 70 A ORDERING INFORMATION TYPE NUMBER PACKAGE 74LVT16244BDL 48-Pin Plastic SSOP Type III -40 C to +85 C SOT370-1 48-Pin Plastic TSSOP Type II -40 C to +85 C SOT362-1 56VFBGA Ball Grid Array -40 C to +85 C SOT702-1 LOGIC SYMBOL 46 44 43 1 41 40 38 37 48 DWG NUMBER 74LVT16244BDGG 74LVT16244BEV 47 TEMPERATURE RANGE 1A0 1Y0 1A1 1Y1 1A2 1Y2 1A3 1Y3 2 36 3 35 5 33 6 1OE 25 2A0 2Y0 2A1 2Y1 2A2 2Y2 2A3 2Y3 2OE 32 8 30 9 29 11 27 12 26 24 3A0 3Y0 3A1 3Y1 3A2 3Y2 3A3 3Y3 13 14 16 17 3OE 4A0 4Y0 4A1 4Y1 4A2 4Y2 4A3 4Y3 19 20 22 23 4OE SA00014 NOTE: Pin numbers are shown for SSOP and TSSOP packages only. 2002 Oct 31 2 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B LOGIC SYMBOL (IEEE/IEC) PIN CONFIGURATION 48-pin SSOP and TSSOP 1OE 1 EN1 2OE 48 EN2 1OE 1 48 2OE 3OE 25 EN3 1Y0 2 47 1A0 4OE 24 EN4 1A0 1A1 1A2 1A3 2A0 2A1 2A2 2A3 3A0 3A1 3A2 3A3 4A0 4A1 4A2 4A3 47 1 1 46 2 3 44 5 43 6 41 1 2 40 8 9 1Y1 3 46 1A1 GND 4 45 GND 1Y2 5 44 1A2 1Y3 6 43 1A3 VCC 7 42 VCC 2Y0 8 41 2A0 2Y1 9 40 2A1 GND 10 39 GND 38 2A2 1Y0 1Y1 1Y2 1Y3 2Y0 2Y1 38 11 37 12 2Y3 2Y2 11 36 13 3Y0 2Y3 12 37 2A3 35 14 3Y1 3Y0 13 36 3A0 33 16 3Y2 3Y1 14 35 3A1 32 17 3Y3 GND 15 34 GND 30 19 4Y0 3Y2 16 33 3A2 29 20 4Y1 3Y4 17 32 3A3 27 22 4Y2 VCC 18 31 VCC 26 23 4Y3 4Y0 19 30 4A0 SA00631 4Y1 20 29 4A1 GND 21 28 GND 4Y2 22 27 4A2 4Y3 23 26 4A3 4OE 24 25 3OE 1 1 3 4 2Y2 NOTE: Pin numbers are shown for SSOP and TSSOP packages only. FUNCTION TABLE INPUTS OUTPUTS SA00013 H L X Z nOE nAx nYx L L L L H H H X Z PIN DESCRIPTION 48-pin SSOP and TSSOP = High voltage level = Low voltage level = Don't care = High Impedance "off" state 2002 Oct 31 3 PIN NUMBER SYMBOL NAME AND FUNCTION 47, 46, 44, 43 41, 40, 38, 37 36, 35, 33, 32 30, 29, 27, 26 1A0 - 1A3, 2A0 - 2A3, 3A0 - 3A3, 4A0 - 4A3 Data inputs 2, 3, 5, 6 8, 9, 11, 12 13, 14, 16, 17 19, 20, 22, 23 1Y0 - 1Y3, 2Y0 - 2Y3, 3Y0 - 3Y3, 4Y0 - 4Y3 Data outputs 1, 48 25, 24 1OE, 2OE, 3OE, 4OE Output enables 4, 10, 15, 21 28, 34, 39, 45 GND Ground (0V) 7, 18, 31, 42 VCC Positive supply voltage Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B PIN CONFIGURATION PIN DESCRIPTION 56-ball VFBGA terminal assignments 56-ball VFBGA terminal assignments 1 2 3 4 5 6 A 1OE NC NC NC NC 2OE B 1Y1 1Y0 GND GND 1A0 1A1 C 1Y3 1Y2 VCC VCC 1A2 1A3 D 2Y1 2Y0 GND GND 2A0 2A1 E 2Y3 2Y2 2A2 2A3 G F 3Y0 3Y1 3A1 3A0 H G 3Y2 3Y3 GND GND 3A3 3A2 J H 4Y0 4Y1 VCC VCC 4A1 4A0 J 4Y2 4Y3 GND GND 4A3 4A2 K 4OE NC NC NC NC 3OE 1 2 3 4 5 6 A B C D E F K TOP VIEW SA00619 2002 Oct 31 4 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B ABSOLUTE MAXIMUM RATINGS1, 2 PARAMETER SYMBOL VCC RATING DC supply voltage IIK DC input diode current VI DC input voltage3 IOK DC output diode current VOUT CONDITIONS VI < 0 DC output voltage3 IOUT O DC output current Tstg Storage temperature range UNIT -0.5 to +4.6 V -50 mA -0.5 to +7.0 V mA VO < 0 -50 Output in OFF or HIGH state -0.5 to +7.0 V Output in LOW state 128 mA -64 mA -65 to +150 C Output in HIGH state NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 C. 3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL VCC LIMITS PARAMETER DC supply voltage UNIT MIN MAX 2.7 3.6 V 0 5.5 V VI Input voltage VIH HIGH-level input voltage VIL Input voltage 0.8 V IOH HIGH-level output current -32 mA LOW-level output current 32 LOW-level output current; current duty cycle 50%; f 1 kHz 64 IOL O t/v Input transition rise or fall rate; Outputs enabled Tamb Operating free-air temperature range 2002 Oct 31 2.0 -40 5 V mA 10 ns/V +85 C Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER Temp = -40 C to +85 C TEST CONDITIONS MIN VIK Input clamp voltage VOH High-level output voltage VCC = 2.7 V; IIK = -18 mA VCC = 2.7 V to 3.6 V; IOH = -100 A VOL Low-level output voltage Input leakage current Output off current Bus Hold current A inputs 6 -1.2 VCC 2.4 2.5 VCC = 3.0 V; IOH = -32 mA 2.0 2.3 0.07 0.2 VCC = 2.7 V; IOL = 24 mA 0.3 0.5 VCC = 3.0 V; IOL = 16 mA 0.25 0.4 VCC = 3.0 V; IOL = 32 mA 0.3 0.5 VCC = 3.0 V; IOL = 64 mA 0.4 0.55 0.1 1.0 VCC = 0 V or 3.6 V; VI = 5.5 V 0.4 10 VCC = 3.6 V; VI = VCC 0.1 1 Control pins Data pins 4 VCC = 0 V; VI or VO = 0 V to 4.5 V -0.4 -5 0.1 100 75 135 VCC = 3 V; VI = 2.0 V -75 -135 VCC = 0 V to 3.6 V; VCC = 3.6 V 500 UNIT V V VCC = 2.7 V; IOL = 100 A VCC = 3 V; VI = 0.8 V IHOLD -0.85 VCC-0.2 VCC = 3.6 V; VI = 0 IOFF MAX VCC = 2.7 V; IOH = -8 mA VCC = 3.6 V; VI = VCC or GND II TYP1 V A A A Current into an output in the HIGH state when VO > VCC VO = 5.5 V; VCC = 3.0 V 50 125 A Power-up/down 3-State output current 3 VCC 1.2 V; VO = 0.5 V to VCC; VI = GND or VCC OE/OE = Don't care 1 100 A IOZH 3-State output HIGH current VCC = 3.6 V; VO = 3.0 V; VI = VIL or VIH 0.5 5 A IOZL 3-State output LOW current VCC = 3.6 V; VO = 0.5 V; VI = VIL or VIH 0.5 -5 A VCC = 3.6 V; Outputs HIGH, VI = GND or VCC, IO = 0 0.07 0.12 VCC = 3.6 V; Outputs LOW, VI = GND or VCC, IO = 0 4.0 6.0 0.07 0.12 0.1 0.2 IEX IPU/PD ICCH ICCL Quiescent supply current ICCZ ICC VCC = 3.6 V; Outputs Disabled; VI = GND or VCC, IO = 0 Additional supply current per input pin 2 VCC = 3 V to 3.6 V; One input at VCC-0.6 V, Other inputs at VCC or GND 5 NOTES: 1. All typical values are at VCC = 3.3 V and Tamb = 25 C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND. 3. This parameter is valid for any VCC between 0 V and 1.2 V with a transition time of up to 10 msec. From VCC = 1.2 V to VCC = 3.3 V 0.3 V a transition time of 100 sec is permitted. This parameter is valid for Tamb = 25 C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled to VCC or GND. 6. This is the bus-hold overdrive current required to force the input to the opposite logic state. 2002 Oct 31 6 mA mA Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B AC CHARACTERISTICS GND = 0 V; tR = tF = 2.5 ns; CL = 50 pF; RL = 500 ; Tamb = -40 C to +85 C. LIMITS SYMBOL PARAMETER VCC = 3.3 V 0.3 V VCC = 2.7 V MIN TYP1 MAX MAX WAVEFORM UNIT tPLH tPHL Propagation delay nAx to nYx 1 0.5 0.5 1.8 1.7 3.2 3.2 4.0 4.0 ns tPZH tPZL Output enable time to HIGH and LOW level 2 1.0 1.0 2.3 2.1 4.0 4.0 5.0 5.3 ns 2 1.0 1.0 3.2 2.9 4.5 4.0 5.0 4.4 ns tPHZ Output disable time tPLZ from HIGH and LOW Level NOTE: 1. All typical values are at VCC = 3.3 V and Tamb = 25 C. AC WAVEFORMS VM = 1.5 V; VIN = GND to 3.0 V. 2.7 V nOE INPUT VM VM 2.7 V 0V nAx INPUT VM tPZL VM tPLZ 3.5 V 0V tPLH nYx OUTPUT tPHL VM VOL + 0.3 V VOH VOL tPHZ tPZH nYx OUTPUT VM VM VOH VOH - 0.3 V nYx OUTPUT VOL VM 0V SW00008 Waveform 1. 2002 Oct 31 SW00009 Input (nAx) to Output (nYx) Propagation Delays Waveform 2. 3-State Output Enable and Disable Times 7 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B TEST CIRCUIT AND WAVEFORMS 6V VCC OPEN VOUT VIN PULSE GENERATOR tW 90% RL GND CL 10% 10% 0V RL tTHL (tF) tTLH (tR) tTLH (tR) tTHL (tF) 90% POSITIVE PULSE Test Circuit for 3-State Outputs SWITCH tPHZ/tPZH GND tPLZ/tPZL 6V tPLH/tPHL open VM VM 10% tW 0V VM = 1.5 V Input Pulse Definition INPUT PULSE REQUIREMENTS DEFINITIONS FAMILY RL = Load resistor; see AC CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. AMP (V) 90% 10% SWITCH POSITION TEST AMP (V) VM VM NEGATIVE PULSE D.U.T. RT 90% 74LVT16 Amplitude Rep. Rate 2.7 V 10 MHz tW tR tF 500 ns 2.5 ns 2.5 ns RT = Termination resistance should be equal to ZOUT of pulse generators. SW00003 2002 Oct 31 8 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm 2002 Oct 31 9 SOT370-1 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1 mm 2002 Oct 31 10 SOT362-1 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B VFBGA56: plastic very thin fine-pitch ball grid array package; 56 balls; body 4.5 x 7 x 0.65 mm 2002 Oct 31 11 SOT702-1 Philips Semiconductors Product data 3.3 V LVT 16-bit buffer/driver (3-State) 74LVT16244B REVISION HISTORY Rev Date Description _4 20021031 Product data (9397 750 09136); supersedes 74LVT16244B_3 of 1998 Oct 07 (9397 750 04706). Engineering Change Notice 853-1778 27401 (date: 20011203). Modifications: * Add VFBGA56 (EV) package option. Data sheet status Level Data sheet status [1] Product status [2] [3] Definitions I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products--including circuits, standard cells, and/or software--described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Koninklijke Philips Electronics N.V. 2002 All rights reserved. Printed in U.S.A. Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Date of release: 10-02 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. Document order number: 2002 Oct 31 12 9397 750 09136