dla UY POvOUOU Issued 11-00 AM] Mobile Phone Interconnections SIM Connector (6 pos. & 8 pos.) Product Facts w Available in 1.3-1.5 [.051 - .059) and 1.9 - 4.0 [.075 ~.157] heights, 0.7 [.004] increments w Small Size: 11.8% 7.5 [.465 x 295] = Mating interface accept IC card and Plug-in SIM according to [SO 7816-2. w IN accordance with GSM 11.11 Performance Specifications Current rating 0.54 per contact Durability 5000 cycles Material and Finish Housing Thermoplastic Contaet Phosphor Bronze Contact Surface Nickel/Goid SIM (Secur'ty Identity Tyco Electronics ofers a design have so'der contacts Module) cards have been wide selection of low cost under the housing for a and continue to be used in SMT SIM connectors with compact design. Technical Documents: GSM phones. Recently UIM heights rom 1.9mm to All variations are packaged Product Specifications (Universal Identity Modules) 4.0mm depending on your in tape & reel or pick and 4108-19122 (+ 9mm 4.0mm) has been adopted in sveral height rquirements. The place manufacturing. 108-5663 (1.211 1 Sram) W-CDMA standards and wil 1.3 1.5mm design have lication Specificati utilize the same contact solder contacts on the hous- Application Specifications footprint as the SIM. ing, while the 1.9 4.0mm 7114-19054 (1.9mm - 4.Cmm) 114-8279 (1.2m7 1.5mm) Test Reports 5301-19011 (1.9mm - 4.0mm) 501-5346 (1.2mm 1.5mm} Tachnical Support Centar/AMP FAX Service Dimensions are in WWW. amip.com/communiations/com Specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 17