Specification
15 Watts
•Low Cost
•Output Voltages from 5 to 24 V
•PCB Mounting
•Open Frame & Encapsulated Versions
•IT & Medical Approvals
•Class II Construction
•No Load Input Power <0.3 W
VCP Series
Input
Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
Input Current • 0.5 A max at 90 VAC
Inrush Current • 40 A max at 240 VAC, cold start at 25 °C
Power Factor • EN61000-3-2, class A
No Load Input Power • <0.3 W
Input Protection • Internal T2.0A/250 V fuse in line
Output
Output Voltage • See table
Initial Set Accuracy • ±2% at 50% load
Minimum Load • No minimum load required
Start Up Delay • 2 s max
Start Up Rise Time • 100 ms typical
Hold Up Time • 5 ms typical at full load and 115 VAC
Line Regulation • ±0.5% max
Load Regulation • 2% max, 0-100% load
Transient Response • 10% max. deviation, recovery to <1%
within 500 µs for a 50% step load change
at 0.2 A/µs
Ripple & Noise • See table
Overvoltage Protection • See table
Overload Protection • 120-280 %, auto recovery
Short Circuit Protection • Trip and restart (hiccup mode)
Temperature • 0.2 %/°C
Coefficient
xppower.com
General
Efficiency • See table
Isolation • 4000 VAC Input to Output
Switching Frequency • 132 kHz typical
MTBF • 250 kHrs to MIL-HDBK-217F at 25 °C, GB
Environmental
Operating Temperature • 0 °C to +70 °C, derate from 100% load at
50 °C to 50% load at 70 °C
Cooling • Natural convection
Operating Humidity • 5-90% RH, non-condensing
Storage Temperature • -20 °C to +80 °C
Vibration • 10-300 Hz, 2 g 15 mins/sweep. 30 mins
for each of 3 axes
EMC & Safety
Emissions • EN55011/22, level B conducted & radiated
Harmonic Currents • EN61000-3-2, class A
Voltage Flicker • EN61000-3-3
ESD Immunity • EN61000-4-2, ±4 kV indirect contact,
±8 kV air, Perf Criteria A
Radiated Immunity • EN61000-4-3, 3 V/m, Perf Criteria A
EFT/Burst • EN61000-4-4, level 2, Perf Criteria A
Surge • EN61000-4-5 installation class 3,
Perf Criteria A
Conducted Immunity • EN61000-4-6, 3 V, Perf Criteria A
Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria A
Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms,
100% 5000 ms, Perf Criteria A, B, B
Safety Approvals • EN60950-1, cUL60950-1, IEC60950-1,
EN60601-1, cUL60601-1, IEC60601-1
ACDC
B R A N D
GREEN•POWER
VCP15
04-Oct-11
ACDC
Output Power Output Voltage(2) Output Current Ripple & Noise(1) OVP Setting(3) Efficiency(5) Model Number(4)
10 W 5.0 V 2.00 A 100 mV 10.0 V 74% VCP15US05†^
15 W 12.0 V 1.25 A 100 mV 20.0 V 82% VCP15US12†^
15 W 15.0 V 0.90 A 150 mV 25.0 V 83% VCP15US15
15 W 24.0 V 0.63 A 200 mV 35.0 V 84% VCP15US24†^
1. Measured at DC output connector using 20 MHz bandwidth and 0.1 µF ceramic capacitor in parallel with 10 µF electrolytic capacitor placed at connector terminals.
2. Other voltages between 5.0 V and 24 V are available, consult sales for details.
3. Typical trip point.
4. For encapsulated versions, add suffix ‘-E’ to the model number e.g VCP15US24-E.
5. Average of efficiencies measured at 25%, 50%, 75% & 100% load and 230 VAC input.
Models and Ratings
Mechanical Details
Notes
1. All dimensions are in inches (mm).
2. Weight: Open frame versions: 0.09 lbs (40 g) approx.
Encapsulated versions: 0.22 lbs (100 g) approx.
3. Tolerance: x.xx = ±0.04 (x.x = ±0.1); x.xxx = ±0.2 (x.xx = ±0.5)
Pin Designation
1 Live
2 Neutral
3 No connection
4 Output -VE
5 Output +VE
Notes
0.06
(1.60)
0.15
(3.80)
0.18
(4.50)
ø 0.070
(ø1.80)
ø 0.04
(ø1.00)
0.85
(21.50)
1.24
(31.40)
1.49 (38)
0.555
(14.1)
0.484 (12.3)
1.27 (32.5)
2.55 (65.0)
1.209 (30.7)
0.819 (20.8)
0.465
(11.8)
0.67
(17.0)
1.205 (30.6)
0.626
(15.9)
0.677
(17.2)
1
2
3
4
5
1.197 (30.4)
TOP VIEW
0.626 (15.9)
1.65 (42.0)
0.465 (11.8) 0.677 (17.2)
0.484 (12.3)
1.209 (30.7)
1.205 (30.6)
0.819 (20.8)
32
1
4
5
0.555 (14.1)
1.11 (28.2)
0.15 (3.80)
0.67 (17.0)
1.197 (30.4)
2.72 (69.0)
TOP VIEW
ø 0.04
(ø1.00)
Encapsulated Version (E)Open Frame Version
†Available from Farnell & element14. See page 28. ^Available from Newark. See page 28.
