T-1 (3mm) BLINKING LED LAMP Part Number: L-36BYD Yellow Features Description z T-1 package with rectangular base. The Yellow source color devices are made with Gallium z With built-in blinking IC. Arsenide Phosphide on Gallium Phosphide Yellow Light z Operation voltage from 3.5V to 14V. Emitting Diode. z Blinking frequency from 3.0Hz to 1.5Hz. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAD0619 REV NO: V.7B DATE: JAN/02/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003804 Selection Guide Part No. Dice L-36BYD Lens Type Yellow (GaAsP/GaP) Viewing Angle [1] Iv (mcd) V= 9V Yellow Diffused Min. Typ. 21/2 8 15 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. Typ. peak Peak Wavelength Yellow 590 nm D Dominant Wavelength Yellow 588 nm 1/2 Spectral Line Half-width Yellow 35 nm IF Forward Current Yellow 22 mA Min:VF=3.5V Typ:VF=5V ISON Supply Current Yellow 8 mA VF=3.5V ISON Supply Current Yellow 44 mA VF=14V f Blink Frequency Yellow Hz VF=3.5V~14V 8 Max. 1.5 3 Units Test Conditions Note: 1.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 310 mW Forward Voltage 14 V Reverse Voltage 0.5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature [1] 260C For 3 Seconds Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAD0619 REV NO: V.7B DATE: JAN/02/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003804 Yellow L-36BYD SPEC NO: DSAD0619 REV NO: V.7B DATE: JAN/02/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003804 PACKING & LABEL SPECIFICATIONS L-36BYD SPEC NO: DSAD0619 REV NO: V.7B DATE: JAN/02/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003804 SPEC NO: DSAD0619 REV NO: V.7B DATE: JAN/02/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003804 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAD0619 REV NO: V.7B DATE: JAN/02/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101003804