Varicon(R) Series 7024 - 0.100" Staggered Dual Row FEATURES * Guide sockets facilitate mating, ensure correct alignment * Open-ended card slot; use with p.c. card of any width * Wide range of contact terminations * Sizes 17, 23, 29, 35, 41 * For 116" or 332" p.c. card * Mates with Series 7023 Plug TECHNICAL SPECIFICATIONS Current Rating: 10 amperes Contact Resistance: 6 milliohms, maximum Contact Material and Plating: Phosphor Bronze per QQ-B-750, Composition A. Gold, 10 microinches minimum, over nickel, 30 to 100 microinches Insertion/Withdrawal Force: 2 to 16 ounces per contact Insulator Material: Diallyl phthalate, glass-filled, flame resistant, per MIL-M-14F, Type SDGF. Operating Temperature: -40C to +120C Insulation Resistance: 25,000 megohms, minimum Dielectric Withstanding Voltage: Sea Level: 1800 Volts rms 3.4" Hg: 675 Volts rms ORDERING CODE 00 7024 023 163 001 Number of Contacts 017, 023, 029, 035, 041 Contact Code See table. Variation Code 001 = 1/16" Thick Card 002 = 3/32" Thick Card 110 = 1/16" Thick Card 50 mil Gold 111 = 3/32" Thick Card 50 mil Gold 141 = 60 7001 06 33 P.C. Termination for 1/8" Card 146 = 60 7001 13 13 .078" Base Taper Tab 156 = 60 7001 18 13 Wire wrapping (.026 x .062 x .600") 163 = 60 7001 19 13 .098" Base Taper Tab w/Wire Hole 165 = 60 7001 20 13 Forked Tail Solder Termination for Bus Line Connection (.056 x .125" Slot) 166 = 60 7001 20 23 Dual Solder Termination for 2 Wires or Bus Line (.056 x .125" Slot) 189 = 60 7004 02 13 Conventional Solder Termination for 3 Wires 10 Connector Description For 1/16" Card For 3/32" Card Availability No. of Contacts 17 23 29 35 X X X X X X X X 41 X X Varicon(R) Series 7024 - 0.100" Staggered Dual Row DIMENSIONS: Number of Contacts 17 23 29 35 41 millimeters (inches) A B 1.900 (0.075) 2.500 (0.098) 3.100 (0.122) 3.700 (0.146) 4.300 (0.169) 2.300 (0.091) 2.900 (0.114) 3.500 (0.138) 4.100 (0.161) 4.700 (0.185) C Max. 2.570 (0.101) 3.170 (0.125) 3.770 (0.148) 4.370 (0.172) 4.970 (0.196) E D 1.185 (0.072) 2.435 (0.096) 3.035 (0.119) 3.635 (0.143) 4.235 (0.167) N-CON = Non-Conductive Chassis (1/16" Clearance Around Contacts) .003 .002 1/16" Card 3/32" Card .074 (0.003) .105 (0.004) .074 (0.003) .105 (0.004) .074 (0.003) .105 (0.004) .074 (0.003) .105 (0.004) .074 (0.003) .105 (0.004) G F 17/32" 17/32" 17/32" 17/32" 17/32" N H Con. .468 (0.018) .468 (0.018) .468 (0.018) .468 (0.018) .468 (0.018) N-Con. .343 (0.014) .343 (0.014) .343 (0.014) .343 (0.014) .343 (0.014) 1.600 (0.063) 2.200 (0.087) 2.800 (0.110) 3.400 (0.134) 4.000 (0.157) Con. .208 (0.008) .208 (0.008) .208 (0.008) .208 (0.008) .208 (0.008) N-Con. .146 (0.006) .146 (0.006) .146 (0.006) .146 (0.006) .146 (0.006) CON = Conductive Chassis (1/8" Clearance Around Contacts) MOUNTING LAYOUT 11