SPEC NO: DSAF1366 REV NO: V.3 DATE: MAY/08/2007 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000175
3.2x1.6 mm SMD CHIP LED LAMP
PRELIMINARY SPEC Part Number: APK3216SURCK-F01 Hyper Red
Features
z 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
z LOW POWER CONSUMPTION.
z WIDE VIEWING ANGLE.
z IDEAL FOR BACK LIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Description
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF1366 REV NO: V.3 DATE: MAY/08/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000175
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APK3216SURCK-F01 Hyper Red (InGaAlP) WATER CLEAR 70 200 90°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 635 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm IF=20mA
C Capacitance Hyper Red 35 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAF1366 REV NO: V.3 DATE: MAY/08/2007 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000175
Hyper Red APK3216SURCK-F01
SPEC NO: DSAF1366 REV NO: V.3 DATE: MAY/08/2007 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000175
APK3216SURCK-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAF1366 REV NO: V.3 DATE: MAY/08/2007 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000175
PACKING & LABEL SPECIFICATIONS APK3216SURCK-F01