E099_113.fm 99 RF LOW NOISE BLOCKDOWN CONVERTER EUROPE: LNB FOR BROADCASTING SATELLITE Features (1) (2) (3) (4) Wide band type receiving all broadcasting channels (analog & digital) of Europe. [Universal LNB] Originally developed feed-horn waveguide makes the wide-band, low-noise characteristics possible. One of the industry's most compact and lightweight package Low consumption current design for energy saving [80 mA (TYP.): BS1R5EL100A etc.] Specifications Destination Receiving polarization Model No. <Type> Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Europe, Astra/Eutelsat Satellite etc. Horizontal/Vertical polarization BS1R3EL400A <4 output> BS1R5EL200A <2 output> BS1R5EL100A <1 output> 10.7 to 11.7 [Low band], 11.7 to 12.75 [High band] 950 to 1 950 [Low band], 1 100 to 2 150 [High band] 9.75 [Low band], 10.6 [High band] 0.8 (TYP.) [Low band], 0.7 (TYP.) [High band], (1.0 dB MAX.) 50 to 60 46 (MIN.) -60 dBc/Hz @1 kHz (TYP.) -60 dBc/Hz @1 kHz (TYP.) -75 dBc/Hz @1 kHz (TYP.) 25 (TYP.)/20 (MIN.) Vertical polarization 11.5 to 14.0 (0/22 kHz) Supply voltage (V DC) (Polarization switching voltage) Horizontal polarization 16.0 to 19.0 (0/22 kHz) Power consumption (mA) 180 (TYP.)/250 (MAX.) 150 (TYP.)/250 (MAX.) 80 (TYP.)/110 (MAX.) Waveguide Feed-horn (F/D=0.6) Output impedance ( ) 75 Output connector (F-type) 4-output (H/V, High and low switching) 2-output (H/V, High and low switching) 1-output (H/V, High and low switching) Outline dimensions (mm) 62.8 x 143.2 x 165.5 61.5 x 135.6 x 129.5 140.0 x 60.0 x 60.0 Weight (g) Approx. 530 Approx. 430 Approx. 180 BS1R3EL400A BS1R5EL200A BS1R5EL100A RF Components U.S.A.: LNB FOR BSS SATELLITE BROADCAST Specifications Destination Receiving polarization Model No. <Type> Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Right circular polarization Supply voltage (V DC) (Polarization switching voltage) Left circular polarization Power consumption (mA) Waveguide Output impedance ( ) Output connector (F-type) Outline dimensions (mm) Weight (g) U.S.A. DBS-1 to DBS-3 (Direc-TV Satellite) etc. Right/Left circular polarization BS1H3UP200A <2 output> 12.2 to 12.7 950 to 1 450 11.25 0.6 (TYP.) / 1.1 (MAX.) 50 to 62 (TYP.) -65 dBc/Hz @1 kHz (TYP.) 30 (TYP.)/25 (MIN.) 11.8 to 14.0 16.0 to 19.0 120 (TYP.)/180 (MAX.) Feed-horn (F/D=0.6) 75 2-output (R/L switching) 135 x 117 x 63 Approx. 300 BS1H3UP200A Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 99 E099_113.fm 100 RF LOW NOISE BLOCKDOWN CONVERTER New product JAPAN/ASIA/AUSTRALIA: LNBs FOR CS DIGITAL SATELLITE BROADCAST Specifications Destination Receiving polarization Model No. <Type> Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Vertical polarization Supply voltage (V DC) (Polarization switching voltage) Horizontal polarization Power consumption (mA) Waveguide Output impedance ( ) Output connector (F-type) Outline dimensions (mm) Weight (g) Japan, Asia, Australia, CS Satellite Horizontal/Vertical polarization BS1R5AQ100A 12.25 to 12.75 950 to 1 450 11.3 0.6 (TYP.) / 1.1 (MAX.) 50 (MIN.) -75 dBc/Hz @1 kHz (TYP.) 25 (TYP.)/20 (MIN.) 11.5 to 14.0 16.0 to 19.0 80 (TYP.)120 (MAX.) Feed-horn (F/D=0.6) 75 1-output (H/V switching) 140 x 60 x 60 Approx. 180 BS1R5AQ100A JAPAN: LNBs FOR CS/BS 110 SATELLITE BROADCAST Features (1) Can receive 2 satellite broadcasts of 110 BS/CS digital [Employs wide-band (1 GHz) circular linear polarization conversion technology (septum waveguide structure)] (2) Outstanding noise figure (NF) characteristics enabling compact design of antenna diameter. [NF: 0.6dB (TYP.)] (3) Low current consumption design for improved energy saving. [80 mA (TYP.)] Standard Specifications Destination Receiving polarization Model No. Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Right circular polarization Supply voltage (V DC) (Polarization switching voltage) Left circular polarization Power consumption (mA) Waveguide Output impedance ( ) Output connector (F-type) Outline dimensions (mm) Weight (g) 100 Japan CS/BS 110 Satellite Right circular polarization Right/Left circular polarization BS1F6JP300A BS1F6JP100A 11.71023 to 12.751 1 032.23 to 2 073 10.678 0.7 (TYP.) / 1.1 (MAX.) 48 to 60 -75 dBc/Hz @1 kHz (TYP.) 25 (TYP.)/20 (MIN.) 9.5 to 18.0 13.5 to 16.5 -- 9.5 to 12.0 80 (TYP.)/120 (MAX.) Feed-horn (F/D=0.5) 75 1-output 1-output (R/L switching) 96 x 53.07 x 71 Approx. 165 BS1F6JP300A * Outer cabinet is made upon request. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 101 RF LOW NOISE BLOCKDOWN CONVERTER JAPAN: LNB FOR DUAL CS BROADCAST Specifications Destination Receiving polarization Model No. Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Vertical polarization Supply voltage (V DC) (Polarization switching voltage) Horizontal polarization Power consumption (mA) Waveguide Output impedance ( ) Output connector (F-type) Outline dimensions (mm) Weight (g) Japan, CS satellite (SKY PerfecTV) Horizontal/Vertical polarization BS1D1JP100A 12.2 to 12.75 1 000 to 1 550 11.2 0.7 (TYP.) 50 (MIN.) -60 dBc/Hz @1 kHz (TYP.) 25 (TYP.)/20 (MIN.) 9.5 to 12.0 13.5 to 16.5 120 (TYP.)/150 (MAX.) Dual type feed-horn 75 1-output (H/V switching) 56.2 x 78.2 x 121.56 Approx. 280 BS1D1JP100A * Outer cabinet is made upon request. JAPAN: LNB FOR BS DIGITAL BROADCAST Specifications Japan BS digital (BSAT-2a) Right circular polarization BS1F5JR100A 11.71023 to 12.01325 1 032.23 to 1 335.25 10.678 0.6 (TYP.)/0.9 (MAX.) 48 to 60 -60 dBc/Hz @1 kHz (TYP.) 25 (TYP.) /20 (MAX.) 9.5 to 18.0 120 (TYP.)/150 (MAX.) Feed-horn (F/D=0.5) 75 1-output 43.0 x 101.3 x 43.0 Approx. 110 BS1F5JR100A *Outer cabinet is made upon request. RF Components Destination Receiving system Receiving polarization Model No. Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Supply voltage (V DC) Power consumption (mA) Waveguide Output impedance ( ) Output connector (F-type) Outline dimensions (mm) Weight (g) U.S.A.: LNB FOR FSS BROADCAST Specifications Destination Receiving system Receiving polarization Model No. Input frequency (GHz) Output frequency (MHz) Local oscillation frequency (GHz) NF (dB) Conversion gain (dB) Phase noise Cross-polar discrimination (dB) Supply voltage (V DC) Power consumption (mA) Waveguide Output impedance ( ) Output connector (F-type) Outline dimensions (mm) Weight (g) U.S.A. FSS Horizontal/vertical polarization BS1C1UR100A 11.7 to 12.2 950 to 1 450 10.75 0.6 (TYP.)/0.9 (MAX.) 50 (MIN.) -60 dBc/Hz @1 kHz (TYP.) -- 12 to 24 120 (TYP.)/150 (MAX.) WR-75 75 1-output 48.6 x 96.3 x 45.5 Approx. 150 BS1C1UR100A Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 101 E099_113.fm 102 RF DIGITAL DBS FRONT-END UNIT DIGITAL DBS FRONT-END UNITS unit for digital broadcasting features high quality of signal transmission and improved elimination ability of various D BSkindsfront-end of rejection thanks to using Sharp's original ICs. Features (1) Equipped with a direct conversion IC developed by Sharp. Reliability is improved by reducing power consumption and component counts. (2) Compact and thin design enabling installation on a personal computer PCI card. [Thickness: 12.9 mm (MAX.)] (3) Wide-band reception design also covering CS broadcast band. [Reception frequency: 950 to 2,150 MHz] (4) Wide product line-up of LINK integrated types for contributing to set development time reduction. [Compatible with QPSK/8PSK demodulation] (5) User support tools can be provided. [Sample/evaluation boards and software are available.] Standard Specifications Destination Input type Model No. Input frequency (MHz) Input signal level (dBm) The 1st intermediate frequency (MHz) Base band frequency bandwidth RF input local leak (dBm) AGC linearity (dB/V) PLL phase noise 10 kHz offset (dBc/Hz) 1 kHz offset Output type Channel selection system Noise figure (dB) Tuning voltage (V DC) Supply voltage (V DC) LNB power supply Input impedance ( ) Outline dimensions (mm) 1-input BS2S7VZ1204 Europe/U.S.A./Japan 1-input, single distribution output BS2S7VZ0204 950 to 2 150 -65 to -25 1-input BS2S7HZ1204 Zero-IF (Direct conversion) 10 to 30, 2.5 MHz step (BB LPF) -63 (MAX.) 40 -78 (TYP.) -60 (TYP.) I/Q PLL (I2C-bus)*1 12 (MAX.) 30 5, 3.3 DC 25 V, 400 mA (MAX.) 75 39.8 x 35.9 x 11.0 BS2S7VZ0204 BS2S7HZ1204 Contact Sharp for custom design product. *1 I2C-bus is a trademark of Philips Corporation. 102 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 103 RF DIGITAL DBS FRONT-END UNIT DIGITAL DBS FRONT-END UNITS <QPSK Demodulator Circuit Built-in Type> Specifications <QPSK Demodulator Circuit Built-in Type> Destination Input type Model No. Input frequency (MHz) Input signal level (dBm) The 1st intermediate frequency (MHz) IF bandwidth (MHz) RF input local leak (dBm) AGC linearity (dB/V) The 2nd local control method Output type Symbol rate (M baud) BER (Viterbi output) Channel selection system Noise figure (dB) Image rejection (dB) Tuning voltage (V DC) Supply voltage (V DC) LNB power supply Input impedance ( ) Outline dimensions (mm) Europe/U.S.A./Japan 1-input/RF with loop 1-input through BS2F7VZ1080 BS2F7VZ0184 950 to 2 150 -65 to -25 Zero-IF (Direct conversion) 10 to 30, 2.5 MHz step (BB LPF) -63 (MAX.) 40 -- 8-bit transport 30 (MAX.) 45 (MAX.) Europe/Japan 1-input BS2F7VG0054 479.5 36 Fixed BS2F7VZ1080 30 (MAX.) Eb/No = 5.5 dB (Max.) [PR = 3/4, BER = 2 x 10 -4] PLL (I2C-bus)*1 12 (MAX.) -- 30 (MIN.) 30 5, 3.3 5, 3.3, 2.5 5, 3.3 DC 25 V, 400 mA (MAX.) 75 70.0 x 35.9 x 11.0 95.0 x 42.0 x 11.0 BS2F7VZ0184 Contact Sharp for custom design product. *1 I2C-bus is a trademark of Philips Corporation. DIGITAL DBS FRONT-END UNIT <8 PSK Demodulator Circuit Built-in Type> Specifications <8 PSK Demodulator Circuit Built-in Type> Japan 1-input, single distribution output BS2F7VZ0440 950 to 2 150 -65 to -25 Zero-IF (Direct conversion) 25 (BB LPF) -63 (MAX.) 40 8-bit transport 28.86 PLL (I2C-bus)*1 8 (TYP.) 30 5, 3.3, 1.5 DC 25 V, 400 mA (MAX.) 75 70.0 x 35.9 x 11.0 RF Components Destination Input type Model No. Input frequency (MHz) Input signal level (dBm) The 1st intermediate frequency (MHz) Base band frequency bandwidth RF input local leak (dBm) AGC linearity (dB/V) Output type Symbol rate (M baud) Channel selection system Noise figure (dB) Tuning voltage (V DC) Supply voltage (V DC) LNB power supply Input impedance ( ) Outline dimensions (mm) BS2F7VZ0440 *1 I2C-bus is a trademark of Philips Corporation. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 103 E099_113.fm 104 DBS FRONT-END UNIT FOR ANALOG BROADCASTING RF DBS FRONT-END UNITS WITH BUILT-IN FM DEMODULATOR <ANALOG> Wide lineup of DBS front-end units to cover worldwide broadcasting regulations and specifications for satellite receiving systems. Features (1) A super-compact size to facilitate to make the VCR with the built-in BS compact and to build into the television set. [volume: 22 cm3] (2) Low-voltage drive, low-power consumption design (3) Design with the built-in digital AFC output and keyed AFC circuit suitable for HDTV Specifications Destination Type Model No. Input frequency (MHz) Input signal level (dBm) Output baseband frequency Intermediate frequency (MHz) IF Bandwidth (MHz) Channel selection system Input terminal isolation (dB) S/N (C/N = 14 dB) (dB) Image rejection (dB) Video output level (Vp-p) DET output level (Vp-p) Audio output level (Vrms) (FS) Tuning voltage (V DC) Supply voltage (V DC) LNB power supply Input impedance ( ) Outline dimensions (mm) Europe 1-input (wide band) 2-input (wide band) BS2D7VG1111 BS2D7VG2121 900 to 2 150 -60 to -30 50 Hz to 10.5 MHz 479.5 27 27/18 PLL (I2C-bus)*3 40 (TYP.) - 35 (MIN.) 40 (TYP.) - - - 30 Japan (For TV) BS 1-input (1-band) BS2T1VE1016 1 035.98 to 1 331.5 -65 to -28 50 Hz to 9 MHz 402.78 31 <22 cm3> 2-input type - 37 (MIN.) 55 (MIN.)*1 1.0 1.34 0.85 12*2 5 DC 25 V 400 mA (MAX.) DC 15 V, 350 mA (MAX.) 75 51.5 x 41.4 x 10.4 70.0 x 42.0 x 11.0 <32 cm3> Video and audio processing type *1 A value specified in "Satellite Broadcasting Receiving Equipment Test", Vol. 3 issued by Dempa Gijutsu Kyokai Inc. *2 DC 9 V type of tuning voltage is also available. *3 I2C-bus is a trademark of Philips Corporation. Note: * Standard test signals are as follows. Japan: NTSC dev. = 17 MHzp-p / Europe: PAL dev. = 16 MHzp-p / USA: NTSC dev. = 21.5 MHzp-p. * Custom specs for models other than those listed above, including an introduction to our current 35 cm 3 (35 cc) type models, can be arranged through special consultation. ["Custom specs" refers to whether LT (low threshold), a prescaler (including difference of dividing ratios) or a PLL are necessary or not, what the IF band width should be, and other features that differ from the standard specs.] 104 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 105 RF DIGITAL TERRESTRIAL/CATV FRONT-END UNIT New product Under development FRONT-END UNITS FOR DTV Features (1) Baseband, low-IF and direct-IF output systems are available. (2) High interruption protection performance thanks to the double conversion system and built-in SAW filter. (3) High output voltage level which can be directly input to an A/D converter. Specifications Destination Model No. Input frequency (MHz) Output Noise figure (dB) Phase noise Image rejection (dB) AGC range Channel selection/control system Supply voltage (V DC) Outline dimensions (mm) U.S.A./Korea/Taiwan VA1D2UF3003 VA1D1UF3012 54 to 806 Differential baseband Differential Low-IF output Differential IF output output (5.38 MHz) (44 MHz) 10 (MAX.) -82 dBc/Hz @ 20 kHz offset (MAX.) 55 (MAX.) 70 dB (MIN.) RF AGC + IF AGC VA1D3UF1009 PLL (I2C-bus)*1 5, 9, 32 5, 32 VA1D3UF1009 94.0 x 40.9 x 13.0 *1 I2C-bus is a trademark of Philips Corporation. FRONT-END UNITS FOR DVB-T/DVB-C Features (1) (2) (3) (4) (5) Transport stream output front-end units with built-in OFDM demodulation IC and FEC IC. [VA1T5ED5018] Transport stream output front-end units with built-in QAM demodulation IC and FEC IC. [VH2K3ED7028] Covering all European regions by 2k (U.K.) and 8k (outside U.K.) Standards compatibility [Front-end units for DVB-T]. Compact, low power consumption. Compatible with various types of chassis forms (vertical, horizontal type), loop-through circuit (with/without), input connectors (F connectors/DIN connectors) etc. Standard Specifications Europe/Asia Product name DVB-T front end Model No. Input frequency (MHz) VA1T5ED5018 47 to 862 Transport stream (Built-in OFDM demodulation) 2k, 8k -78 dBm (TYP.) [at 8k, 64QAM] Output Mode Input sensitivity Noise figure (dB) Phase noise Channel selection/control system Power consumption (W) Supply voltage (V DC) Outline dimensions (mm) Direct IF -- -- Europe/China DVB-C front end VH2K3ED7028 110 to 860 Transport stream (Built-in QAM demodulation) 16, 32, 64, 128, 256 QAM -20 dBmV (TYP.) [at 64QAM, C/N = 28 dB] 60 dBc/Hz @ 1 kHz offset (TYP.) 6 (TYP.) 65 dBc/Hz @ 1 kHz offset (TYP.) 65 (TYP.) 60 dBc/Hz @ 1 kHz offset (TYP.) 19.2 dB (TYP.) input level: -50 dBm -- 24.8 dB (TYP.) input level: 0 dBmV Image rejection (dB) C/N Europe/Asia DVB-T front end (RF only) VA1S1ED5010 47 to 862 2.4 5, 3.3, 2.5, 30 87.2 x 37.2 x 12.0 I2C-bus*1 0.6 5, 30 50.6 x 43.3 x 13.4 1.6 5, 3.3, 30 87.2 x 37.2 x 12.0 RF Components Destination VA1T5ED5018 *1 I2C-bus is a trademark of Philips Corporation. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 105 E099_113.fm 106 RF DIGITAL CATV FRONT-END UNIT New product Under development DIGITAL CATV FRONT-END UNITS <Single Conversion Type> Features (1) Miniaturization for thin and compact configuration of onboard sets (2) Built-in diplexer, input buffer amp and SAW filter. (3) Conformable to the DOCSIS standards (for USA models) Specifications Destination Model No. U.S.A. Features Input frequency (MHz) Output frequency (MHz) Conversion gain (dB) Return pass voltage gain (dB) Noise figure (dB) Return pass frequency (MHz) Cross modulation rejection (dBc) Intermodulation (dBc) Input return loss (dB) VH2A7UF2016 VH2F7UF2021 Direct IF output Direct IF output Built-in SAW, IF amp. 54 to 860 43.75 28 (MIN.) - 7 (TYP.) 28 (MIN.) 5 to 42 Europe VH2G3ED7035 Direct IF output with Loop through 47 to 866 36.15 60 (MIN.) - 7 (TYP.) - -50 (MAX.) -50 (MAX.) 6 (MIN.) Phase noise (dBc/Hz) Return pass harmonic distortion (dB) Channel selection system Supply voltage (V DC) Outline dimensions (mm) VH2G7UF2047 VH2N7MF2101 Direct IF output Direct IF output Built-in SAW, Built-in return pass amp. IF AGC amp. Built-in DC-DC 88 to 860 43.75 60 (MIN.) 70 (MIN.) 26 (MIN.) 7.5 (TYP.) -90 (TYP.) at 10 kHz offset - 70.0 x 32.0 x 9.2 PLL (I2C-bus)*1 B: 5, BT: 30 85.0 x 32.0 x 9.2 -92 (TYP.) at 10 kHz offset -47 (MAX.) -90 (TYP.) at 10 kHz offset - B: 5 85.0 x 36.0 x 11.8 B: 5, BT: 30 85.0 x 32.0 x 9.2 *1 I2C-bus is a trademark of Philips Corporation. VH2A7UF2016 VH2G3ED7035 DIGITAL CATV FRONT-END UNIT <Double Conversion Type> Features (1) (2) (3) (4) Thin and compact configuration (Volume for circuit portion: 23 cm3, thickness: 13 mm) Conformable to the set-top box standards (open cable) Wide reception bandwidth (54 to 860 MHz) for digital service band area Low power consumption design for energy savings (1.3 W TYP.) Specifications Destination Model No. Features Input frequency (MHz) Upstream frequency range (MHz) Downstream frequency range (MHz) Output frequency (MHz) Conversion gain (dB) Noise figure (dB) Cross modulation rejection (dBc) Intermodulation (dBc) Input return loss (dB) Phase noise (dBc/Hz) PLL interface Supply voltage (V DC) Outline dimensions (mm) U.S.A. VH1B1UF3006 Built-in upstream/downstream terminals 54 to 860 5 to 27 70 to 130 44 30 (TYP.) 10 (MAX.) -60 (TYP.) -60 (TYP.) 7 (MIN.) -84 (MAX.) at 10kHz offset I2C bus*1 5, 9, 30 69.4 x 36.6 x 9.2 VH1B1UF3006 *1 I2C-bus is a trademark of Philips Corporation. 106 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 107 RF THREE-IN-ONE RF UNIT THREE-IN-ONE RF UNITS (RF FRONT-END UNIT + PIF UNIT + RF MODULATOR* INTEGRATED UNIT) unit of integrating three units of the RF A composite front-end unit, the PIF unit and the RF modulator, being high-frequency basic circuits of the video deck, etc., unite in a compact configuration. It helps to save the set's space, shorten the development period and improve the design flexibility and productivity. Features (1) A compact all-in-one RF unit has achieved drastic saving of the set's space. (2) Enables to shorten the development period for the set and to eliminate adjustment work in the production process. [Matching (PIF frequency/delay AGC) adjustment of the three units are not necessary] VT4U5UF218 Some models do not integrate RF modulator. Specifications TV system PAL B/G Model No. NTSC-M (US) VTDT5ED204 VT4U5UF218 VHF Air Receiving channels (ch) UHF VHF CATV UHF Air CATV 2 to 13 A5 to W+84 21 to C57 1A to 12 Band split Intermediate frequency (MHz) Video Audio VL: 1A to S7 VH: S8 to S37 UHF: S38 to C57 38.9 33.4 VL: 2 to 6 VH: 7 to 13 UHF: 14 to 69 45.75 41.25 PLL(I2C)*1 Channel selection system Detection system RF front-end Image rejection (dB) IF rejection (dB) 14 to 69 X to S41 PLL synchronization detection system, Inter-carr ier sound receiving system Air: 65 CATV: 60 VL: 60 VH: 100 Video output level (Vp-p) 65 100 1.0 Video output S/N (dB) Air: 65 CATV: 60 VL: 75 VH: 90 55 90 1.0 46 47 2.19 Vp-p 480 mVrms Audio output level Audio output S/N (dB) 49 52 Video output modulation (%) 78 77 Video output S/N (dB) 50 55 Audio output modulation (kHz) 40 22.5 50 56 Modulator Audio output S/N (dB) RF output P/S (dB) Transmitting channel Output channel switching type Supply voltage (V DC) Outline dimensions (mm) 16 16 22 to 68 3, 4 PLL frequency synthesizer (I2C)*1 Electronic switch BT: 32/BP, BM, BP: 5 BT: 33/BM, BP, B: 5 85.8 x 43.0 x 11.2 85.8 x 43.0 x 11.2 RF Components IF Figures in brackets indicate the dimensions including PCB overhang. *1 I2C-bus is a trademark of Philips Corporation. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 107 E099_113.fm 108 RF TWO-IN-ONE RF UNIT TWO-IN-ONE RF UNITS (RF FRONT-END UNIT + PIF UNIT) Features (1) High performance RF front-end unit and PIF unit are integrated in one unit, resulting in a short developing time. (2) A composite unit structure improves operability during mounting. (3) Line-up includes horizontal shaped models for LCD TVs/LCD Monitors. Specifications TV system Japan U.S.A. Asia Model No. VT2U5JF553 VT2U5UF553 VT2U5CD553 VHF Air Receiving channels (ch) UHF CATV CATV VHF Air Air UHF CATV CATV VHF Air Air UHF CATV CATV Air C13 to 1 to 12 -- 13 to 62 C38 BL: 1 to 3, C13 to C22 BH: 4 to 12, C23 to C38 BU: 13 to 62 A-5 to W+12 to 2 to 13 14 to 69 W+11 W+84 BL: 2 to 6, A-5 to B BH: 7 to 13, C to W+11 BU: 14 to 69, W+12 to W+84 1A, Z1 to Z34 to 1 to 12 13 to 57 Z33 Z38 BL: 1 to 5, 1A, Z1 to Z4 BH: 6 to 12, Z5 to Z33 BU: 13 to 57, Z34 to Z38 Video 58.75 45.75 38.0 Audio 54.25 41.25 D/K: 31.5, I: 32.0, B/G: 32.5, M/N: 33.5 Band split Intermediate frequency (MHz) Detection system Pseudo synchronization detection system, split-carr ier audio receiving system Terminals Input: F-type junction Input: F-type junction Input impedance ( ) B voltage (V DC) Noise figure (dB) BM: 5/BP: 5/BT: 31.5 4 5 5 BM: 5/BP: 5/BT: 31 4.5 Type RF front-end 5 6 6 BM: 5/BP: 5/BT: 31 6 5 6 6 7 CATV compatible PLL frequency synthesizer (I2C)*1 Channel selection system Image rejection (dB) IF rejection (dB) IF Input: DIN type terminal 75 VL: 85, VH: 75 75 VL: 75, A5 to I: 85, J to W+84: 60 60 VL: 70, VH: 70 60 VL: 100, VH: 100 100 VL: 90, VH: 100 100 VL: 50 to 70, VH: 90 90 Video output level (Vp-p) 1.8 1.0 1.0 Video output S/N (dB) 46 46 44 Noise limit sensitivity (dB) at S/N = 30 dB 44 44 42 Audio output level (mVrms) 290 290 290 Audio output S/N (dB) 55 52 45 Audio frequency characteristics (at 70 kHz) -0 -2 -0 70.0 x 43.3 x 12.0 Outline dimensions (mm) *1 I2C-bus is a trademark of Philips Corporation. VT2U5UF553 108 VT2U5CD553 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 109 RF ANALOG TERRESTRIAL RF FRONT-END UNIT New product RF FRONT-END UNITS <VTST Series> Features (1) Miniature size achieved using thin profile, low height design in industry standard RF front-end unit (terminal shape and terminal pin arrays) (Circuit area of 20 cm3 contributes to space saving, miniature design in onboard set products) (2) Model lineup corresponding to domestic product standards of Europe, China, Japan and the United States. F-type junction input type With RF output terminal type Specifications (Major models of VTST series) Destination Europe Hyper, for frequency synthesizer Model No. VTST5HD970 VHF UHF Air CATV Receiving channel (ch) 21 to 2 to 12 X to S41 C57 Type B1: 2 to S6 B2: S7 to S36 B3: S37 to C57 38.9 33.4 5 Band split Video Intermediate frequency (MHz) Audio B voltage (V DC) Input impedance ( ) VSWR Noise figure (dB) Power gain (dB) Image rejection (dB) IF rejection (dB) 2 5 40 2 7 38 VL: 70 VH: 65 VL: 70 VH: 90 2 6 40 60 90 Outline dimensions (mm) U.S.A. China Japan With PLL, for frequency CiSPR-compatible, hyper, With PLL, for frequency With PLL, for frequency synthesizer synthesizer, with RF output synthesizer, F-type junction input for voltage synthesizer VTST5UF740 VTST5HD950 VTST5JF540 VTST5JB540 VHF UHF VHF UHF VHF UHF VHF UHF Air CATV Air CATV Air CATV Air CATV 13 to 57 A-5 to 14 to 69 Z1 to Z34 to C13 to 13 to 62 C13 to 13 to 62 2 to 13 W + 84 1 to 12 1 to 12 1 to 12 Z38 Z33 C38 C38 (A-8) B1: 2 to B B1: 1 to 5, Z1 to Z4 BL: 1 to C14 BL: 1 to C14 B2: C to W+11 B2: 6 to 12, Z5 to Z33 BU: BU: BH: C15 to C38 BH: C15 to C38 B3: W+12 to 69 B3: Z34 to Z38 45.75 38.0 58.75 41.25 31.5 54.25 5 5 5 75 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2 5 6 5 5 7 6 4 5 4.5 8 9 8.5 39 39 37 40 38 40 40 37 40 36 33 36 VL: 70 VL: 70 VL: 85 VL: 85 70 60 80 80 VH: 65 VH: 65 VH: 85 VH: 85 VL: 70 VL: 60 VL: 80 VL: 85 90 90 100 100 VH: 90 VH: 90 VH: 100 VH: 100 53.0 x 39.5 x 11.5 RF Components ULTRA COMPACT FRONT-END UNITS <VT2V Series> Features (1) Compact and thin design suitable for building into a portable unit with LCD monitor. (Circuit area of 11.4 cm3) (2) Contribute to simplifying developing process and saving space thanks to the built-in VIF/SIF circuit. Specifications Destination Model No. Receiving channel Japan VT2V5JP5550 VHF UHF 1 to 12 13 to 62 58.75 The 1st intermediate Video frequency (MHz) Audio 54.25 Supply voltage (V DC) 5, 31 Power consumption (W) 0.75 (TYP.) Input impedance ( ) Video S/N (dB) 50 (TYP.) Audio S/N (dB) 48 (TYP.) Noise limit sensitivity (dB) 42 (TYP.) Video frequency characteristics -1.0 dB (TYP.) at 3.58 MHz Audio frequency characteristics 0 dB (TYP.) at 80 kHz Outline dimensions (mm) Japan/U.S.A. VT2V8UP5510 UHF CATV FM Radio JPN: JPN: JPN: 76 to 13 to 62 C13 to C63 90 MHz USA: USA: USA: 88 to 14 to 69 A-5 to W+84 108 MHz 45.75 41.25 5 single (DC-DC converter) 0.8 (TYP.) VHF JPN: 1 to 12 USA: 2 to 13 75 50 (TYP.) 53 (TYP.) 42 (TYP.) -1.0 dB (TYP.) at 3.58 MHz -1.5 dB (TYP.) at 80 kHz 49.9 x 28.0 x 7.7 VT2V8UP5510 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 109 E099_113.fm 110 RF RF MODULATOR Under development RF MODULATORS types with a modulator function adding RF switch, booster mixer functions are available. The compact design that enables V arious direct mounting on the mother board in the set allows a wider application to VCRs, video disks, BS and CATV equipment. Specifications Audio Video General Destination Type Model No. TV system broadcast method ANT input Output impedance () Output channel (ch) Audio carrier frequency (MHz) Supply voltage (V DC) Video modulation (%) S/N (dB) V/S Audio modulation (%) Multi (4-broadcast type) U.S.A. Compact with PLL, Tuner out Compact, electrical switch type Compact with PLL VT5F1YT0005 VT5F1YT0024 VT5F9MN0027 PAL-G/I/K/M NTSC-M UHF/VHF 75 unbalanced 21 to 69 variable US 3, 4 4.5/5.5/6.0/6.5 4.5 5, 30 5 80 6 78 7 45 (MIN.) 50 (MIN.) V/S = 7/3 V/S = 7/3 M: 100 28 (100% = 25 kHz) 100 20 (100% = 25 kHz) G/I/K: 100 24 (100% = 50 kHz) S/N (dB) Distortion (%) Outline dimensions (mm) 45 (MIN.) 3.0 (MAX.) 47 (MIN.) 3.0 (MAX.) VT5F1YT0024 43 x 25.5 x 11.2 (circuit portion) Outline Dimensions VT5F1YT0005/(VT5F9MN0027) VT5F1YT0024 13.2 13.2 26.9 25.5 14.2 Tuner Out 11.2 43.0 38.0 1 TERMINAL No. 1 TERMINAL NAME BT 2 3 4 5 3.5 10.0 24.0 46.5 45.5 44.4 43.0 3.5 10.0 24.0 38.0 46.5 6.8 3.0 45.5 3.0 110 26.9 25.5 14.2 44.4 11.2 6 2 3 4 5 6 +B SDA SCL AUDIO IN VIDEO IN 1 TERMINAL No. 1 TERMINAL NAME BT 2 +B 2 3 3 4 SDA SCL 4 5 6 5 6 AUDIO IN VIDEO IN Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 111 RF SS WIRELESS COMMUNICATION UNIT New product SS WIRELESS COMMUNICATION UNITS Features (1) (2) (3) (4) Achieves high-speed communication conforming to wireless LAN standard IEEE 802.11b [11 Mbps: DC2A1AZ014] Compact package for compact equipment design (10.5 cm3: DC2A1AZ004/DC2A1AZ014) Improved phasing resistance characteristics by using equalizer circuit base band IC [DC2A1AZ014] Improves throughput of communications, thanks to a unique multiple channel system (2 Mbps x 7 (23 channels*1) multiple channels: DC2A1AZ001) (5) Low power consumption for battery operation of portable equipment Specifications Compatible standards Model No. Communication frequency range (GHz) No. of communication channels* 1 Transmission output (mW/MHz) Communication system Modulation system Spectrum distribution system Distribution ratio Data transfer rate (Mbps) Multi rate (by multiple channel selection) Communication distance* 2 Supply voltage (V DC) Current consumption Outline dimensions (mm) Weight (g) IEEE 802.11 compatible DC2A1AZ001 2.400 GHz to 2.497 GHz 7 ch at 2471-2497 MHz band 23 ch at 2400-2483.5 MHz band IEEE 802.11 compatible DC2A1AZ004 2.400 GHz to 2.497 GHz 3 ch 10 or less Half duplex Wave width phase modulation system Delay multiple system with direct distribution x11 (baseband) 2 (MAX.) 10 (MAX.) 200 kbps/400 kbps/600 kbps/800 kbps 1/2/3/4/5/6/8/10 Mbps 1.0 Mbps/1.2 Mbps/1.6 Mbps/2.0 Mbps Indoor: 50 m/Insight: 100 m (TYP.) Indoor: 30 m/Insight: 50 m (TYP.) 3.3 Transmission: 280 mA (TYP.) Transmission: 380 mA (TYP.) Reception: 170 mA (TYP.) Reception: 240 mA (TYP.) Sleep: 10 mA (TYP.) Sleep: 15 mA (TYP.) 51.3 x 41.9 x 4.9 51.3 x 42.3 x 7.6 (Excluding bumps and others) (Excluding bumps and others) Approx. 24 Approx. 17 IEEE 802.11b compatible DC2A1AZ014 2.400 GHz to 2.497 GHz 14 ch (channel span over 30 MHz) CCK, DQPSK, DBPSK Direct distribution system 11 (MAX.) 1/2/5.5/11 Mbps Indoor: 30 m/Insight: 50 m (TYP.) Transmission: 290 mA (TYP.) Reception: 170 mA (TYP.) Sleep: 15 mA (TYP.) 51.3 x 41.9 x 5.0 (Excluding bumps and others) Approx. 17 DC2A1AZ001 DC2A1AZ004 RF Components *1 Number of channels which can be used may differ according to the country's laws. *2 Communication distances may differ due to the conditions to be used. Take the values herein as references. DC2A1AZ014 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 111 E099_113.fm 112 RF SS WIRELESS LAN CARD New product SS WIRELESS LAN CARDS Features (1) (2) (3) (4) Achieves high-speed communication conforming to wireless LAN standard IEEE 802.11b [11 Mbps: DC2B1AZ019] Improved phasing resistance characteristics by using equalizer circuit base band IC [DC2B1AZ019] Compact design with built-in diversity antenna [PCMCIA Type II compatible] Low power consumption Specifications Compatible standards etc. Model No. Communication frequency range (GHz) No. of communication channels* 1 Transmission output (mW/MHz) Communication system Modulation system Spectrum distribution system Data transfer ratio (Mbps) Data transfer rate (Mbps) Communication distance* 2 Antenna system Supply voltage (V DC) Current consumption Outline dimensions (mm) Weight (g) IEEE 802.11 compatible DC2B1AZ010 2.400 GHz to 2.4835 GHz IEEE 802.11b compatible DC2B1AZ019 2.400 GHz to 2.497 GHz 3 ch 10 or less Half duplex Wave width phase modulation system Delay multiple system with direct distribution 10 (MAX.) 1 (DBPSK)/2 (DQPSK)/10 (Sharp's system) Indoor: 50 m/Insight: 100 m (TYP.) -- at 2 Mbps mode Indoor: 30 m/Insight: 50 m (TYP.) -- at 10 Mbps mode Diversity with built-in 2 PIFA antenna (With external antenna connector) 5.0 Transmission: 430 mA (TYP.) Reception: 340 mA (TYP.) Sleep: 120 mA (TYP.) 125.5 x 54.0 x 9.0 Approx. 60 BPSK, QPSK, CCK Direct distribution (DSSS) system 11 (MAX.) 1 (DBPSK), 2 (DQPSK), 5.5/11 (CCK) Indoor: 50 m/Insight: 100 m (TYP.) -- at 2 Mbps mode Indoor: 35 m/Insight: 60 m (TYP.) -- at 11 Mbps mode Diversity with built-in 2 antenna 3.3 Transmission: 330 mA (TYP.) Reception: 190 mA (TYP.) 110.1 x 54.0 x 7.2 Approx. 40 *1 Number of channels which can be used may differ according to the country's lows. *2 Communication distances may differ due to the conditions to be used. Take the values here in as references. DC2B1AZ010 112 DC2B1AZ019 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. E099_113.fm 113 RF BLUETOOTHTM CF CARD/MODULE New product Under development BluetoothTM CF CARD TYPES Features (1) BluetoothTM standard v1.1 compatible (2) Built-in super compact antenna (3) CompactFlash standard ver.1.4 compatible Specifications Compatible standards Model No. Communication frequency range (MHz) No. of communication channels Channel interval Transmission output (dBm) Modulation system Communication system Distribution system Data transfer ratio (MAX.) Antenna system Communication distance* 1 Supply voltage (VDC) Current consumption (mA) Outline dimensions (mm) Weight (g) BluetoothTM standard v1.1 BluetoothTM standard v1.1 Power Class 3 Power Class 1 DC2C1BZ001 DC2C1BZ002 2,402 to 2,480 79 ch 1 MHz 0 or less 20 or less GFSK TDD Frequency hopping: 1600 hops/s 1 Mbit/s Built-in inverted F type antenna 10 m (TYP.) Insight: 100 m (TYP.) 3.3 Transmission: 85, Reception: 86 Transmission: 165, Reception: 86 42.8 x 49.4 x 3.3 Approx. 13 Approx. 13 DC2C1BZ001 *1 Communication distances may differ due to the conditions to be used. Take the values herein as references. Note: CompactFlash is a trademark of SanDisk Corporation. BluetoothTM MODULES Features (1) BluetoothTM standard v1.1 compatible (2) Super compact, surface mount type (3) Compatible with 2 types of interface Model for UART*2 DC2D1BZ001 Model for USB*3 DC2D1BZ003 Compatible standards <Type> Model No. Communication frequency range (MHz) No. of communication channels Channel interval Transmission output Receiving sensitivity Modulation system Communication system Distribution system Antenna Supply voltage (VDC) Current consumption (mA) Output interface Outline dimensions (mm) BluetoothTM standard v1.1 power class 3 <built-in base band> <without base band> DC2D1BZ001 DC2D1BZ003 DC2D1BZ002 2,402 to 2,480 79 ch 1 MHz 0 or less -85 dBm (TYP.)/(target) GFSK Half duplex Frequency hopping: 1600 hops/s External 3.0 Transmission: 46, Transmission: 85, Reception: 85 Reception: 57 Sharp specification UART*2 USB*3 15.5 x 15.5 x 2.5 16.0 x 13.8 x 2.5 RF Components Specifications DC2D1BZ001 DC2D1BZ002 *2 UART: Universal Asynchronous Receiver Transmitter *3 USB: Universal Serial Bus Bluetooth is a property owned by its trademark right holders. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 113