RF
99
RF Components
LOW NOISE BLOCKDOWN CONVERTER
■
EUROPE: LNB FOR BROADCASTING SATELLITE
◆
Features
(1) Wide band type receiving all broadcasting channels (analog & digital) of Europe. [Universal LNB]
(2) Originally developed feed-horn waveguide makes the wide-band, low-noise characteristics possible.
(3) One of the industry’s most compact and lightweight package
(4) Low consumption current design for energy saving [80 mA (TYP.): BS1R5EL100A etc.]
◆
Specifications
■
U.S.A.: LNB FOR BSS SATELLITE BROADCAST
◆
Specifications
Destination Europe, Astra/Eutelsat Satellite etc.
Receiving polarization Horizontal/Vertical polarization
Model No. <Type> BS1R3EL400A <4 output> BS1R5EL200A <2 output> BS1R5EL100A <1 output>
Input frequency (GHz) 10.7 to 11.7 [Low band], 11.7 to 12.75 [High band]
Output frequency (MHz) 950 to 1 950 [Low band], 1 100 to 2 150 [High band]
Local oscillation frequency (GHz) 9.75 [Low band], 10.6 [High band]
NF (dB) 0.8 (TYP.) [Low band], 0.7 (TYP.) [High band], (1.0 dB MAX.)
Conversion gain (dB) 50 to 60 46 (MIN.)
Phase noise -60 dBc/Hz @1 kHz (TYP.) -60 dBc/Hz @1 kHz (TYP.) -75 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Ver tical polarization 11.5 to 14.0 (0/22 kHz)
Horizontal polarization 16.0 to 19.0 (0/22 kHz)
Power consumption (mA) 180 (TYP.)/250 (MAX.) 150 (TYP.)/250 (MAX.) 80 (TYP.)/110 (MAX.)
Waveguide Feed-horn (F/D=0.6)
Output impedance (
Ω
) 75
Output connector (F-type)
4-output (H/V, High and low switching) 2-output (H/V, High and low switching) 1-output (H/V, High and low switching)
Outline dimensions (mm) 62.8
×
143.2
×
165.5 61.5
×
135.6
×
129.5 140.0
×
60.0
×
60.0
Weight (g) Approx. 530 Approx. 430 Approx. 180
BS1R3EL400A BS1R5EL200A BS1R5EL100A
Destination U.S.A. DBS-1 to DBS-3 (Direc-TV Satellite) etc.
Receiving polarization Right/Left circular polarization
Model No. <Type> BS1H3UP200A <2 output>
Input frequency (GHz) 12.2 to 12.7
Output frequency (MHz) 950 to 1 450
Local oscillation frequency (GHz) 11.25
NF (dB) 0.6 (TYP.) / 1.1 (MAX.)
Conversion gain (dB) 50 to 62 (TYP.)
Phase noise -65 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 30 (TYP.)/25 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Right circular polarization
11.8 to 14.0
Left circular polarization
16.0 to 19.0
Power consumption (mA) 120 (TYP.)/180 (MAX.)
Waveguide Feed-horn (F/D=0.6)
Output impedance (
Ω
)75
Output connector (F-type) 2-output
(R/L switching)
BS1H3UP200A
Outline dimensions (mm) 135
×
117
×
63
Weight (g) Approx. 300
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 99 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
100
LOW NOISE BLOCKDOWN CONVERTER
✩
New product
■
JAPAN/ASIA/AUSTRALIA: LNBs FOR CS DIGITAL SATELLITE BROADCAST
◆
Specifications
■
JAPAN: LNBs FOR CS/BS 110° SATELLITE BROADCAST
◆
Features
(1) Can receive 2 satellite broadcasts of 110° BS/CS digital
[Employs wide-band (1 GHz) circular
→
linear polarization conversion technology (septum waveguide structure)]
(2) Outstanding noise figure (NF) characteristics enabling compact design of antenna diameter. [NF: 0.6dB (TYP.)]
(3) Low current consumption design for improved energy saving. [80 mA (TYP.)]
◆
Standard Specifications
Destination Japan, Asia, Australia, CS Satellite
Receiving polarization Horizontal/Vertical
polarization
Model No. <Type> BS1R5AQ100A
Input frequency (GHz) 12.25 to 12.75
Output frequency (MHz) 950 to 1 450
Local oscillation frequency (GHz) 11.3
NF (dB) 0.6 (TYP.) / 1.1 (MAX.)
Conversion gain (dB) 50 (MIN.)
Phase noise -75 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Ver tical polarization 11.5 to 14.0
Horizontal polarization 16.0 to 19.0
Power consumption (mA) 80 (TYP.)120 (MAX.)
Waveguide Feed-horn (F/D=0.6)
Output impedance (
Ω
)75
Output connector (F-type) 1-output (H/V switching)
Outline dimensions (mm) 140
×
60
×
60 BS1R5AQ100A
Weight (g) Approx. 180
Destination Japan CS/BS 110° Satellite
Receiving polarization Right circular polarization Right/Left circular polarization
Model No. BS1F6JP300A
✩
BS1F6JP100A
Input frequency (GHz) 11.71023 to 12.751
Output frequency (MHz) 1 032.23 to 2 073
Local oscillation frequency (GHz) 10.678
NF (dB) 0.7 (TYP.) / 1.1 (MAX.)
Conversion gain (dB) 48 to 60
Phase noise -75 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Right circular polarization
9.5 to 18.0 13.5 to 16.5
Left circular polarization
— 9.5 to 12.0
Power consumption (mA) 80 (TYP.)/120 (MAX.)
Waveguide Feed-horn (F/D=0.5)
Output impedance (
Ω
)75
Output connector (F-type) 1-output 1-output
(R/L switching)
BS1F6JP300A
Outline dimensions (mm) 96
×
53.07
×
71
Weight (g) Approx. 165 * Outer cabinet is made upon request.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 100 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
101
RF Components
LOW NOISE BLOCKDOWN CONVERTER
■
JAPAN: LNB FOR DUAL CS BROADCAST
◆
Specifications
■
JAPAN: LNB FOR BS DIGITAL BROADCAST
◆
Specifications
■
U.S.A.: LNB FOR FSS BROADCAST
◆
Specifications
Destination Japan, CS satellite (SKY PerfecTV)
Receiving polarization Horizontal/Vertical polarization
Model No. BS1D1JP100A
Input frequency (GHz) 12.2 to 12.75
Output frequency (MHz) 1 000 to 1 550
Local oscillation frequency (GHz) 11.2
NF (dB) 0.7 (TYP.)
Conversion gain (dB) 50 (MIN.)
Phase noise -60 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.)/20 (MIN.)
Supply voltage (V DC)
(Polarization switching voltage)
Ver tical polarization
9.5 to 12.0
Horizontal polarization
13.5 to 16.5
Power consumption (mA) 120 (TYP.)/150 (MAX.)
Waveguide Dual type feed-horn
Output impedance (
Ω
)75
Output connector (F-type) 1-output (H/V switching)
Outline dimensions (mm) 56.2 x 78.2 x 121.56 BS1D1JP100A
Weight (g) Approx. 280 * Outer cabinet is made upon request.
Destination Japan
Receiving system BS digital (BSAT-2a)
Receiving polarization Right circular polarization
Model No. BS1F5JR100A
Input frequency (GHz) 11.71023 to 12.01325
Output frequency (MHz) 1 032.23 to 1 335.25
Local oscillation frequency (GHz) 10.678
NF (dB) 0.6 (TYP.)/0.9 (MAX.)
Conversion gain (dB) 48 to 60
Phase noise -60 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) 25 (TYP.) /20 (MAX.)
Supply voltage (V DC) 9.5 to 18.0
Power consumption (mA) 120 (TYP.)/150 (MAX.)
Waveguide Feed-horn (F/D=0.5)
Output impedance (
Ω
)75
Output connector (F-type) 1-output
Outline dimensions (mm) 43.0 x 101.3 x 43.0 BS1F5JR100A
Weight (g) Approx. 110 *Outer cabinet is made upon request.
Destination U.S.A.
Receiving system FSS
Receiving polarization Horizontal/vertical polarization
Model No. BS1C1UR100A
Input frequency (GHz) 11.7 to 12.2
Output frequency (MHz) 950 to 1 450
Local oscillation frequency (GHz) 10.75
NF (dB) 0.6 (TYP.)/0.9 (MAX.)
Conversion gain (dB) 50 (MIN.)
Phase noise -60 dBc/Hz @1 kHz (TYP.)
Cross-polar discrimination (dB) —
Supply voltage (V DC) 12 to 24
Power consumption (mA) 120 (TYP.)/150 (MAX.)
Waveguide WR-75
Output impedance (
Ω
)75
Output connector (F-type) 1-output
Outline dimensions (mm) 48.6
×
96.3
×
45.5
BS1C1UR100A
Weight (g) Approx. 150
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 101 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
102
DIGITAL DBS FRONT-END UNIT
■
DIGITAL DBS FRONT-END UNITS
BS front-end unit for digital broadcasting features high quality of signal transmission and improved elimination ability of various
kinds of rejection thanks to using Sharp’s original ICs.
◆
Features
(1) Equipped with a direct conversion IC developed by Sharp. Reliability is improved by reducing power consumption and component
counts.
(2) Compact and thin design enabling installation on a personal computer PCI card. [Thickness: 12.9 mm (MAX.)]
(3) Wide-band reception design also covering CS broadcast band. [Reception frequency: 950 to 2,150 MHz]
(4) Wide product line-up of LINK integrated types for contributing to set development time reduction. [Compatible with QPSK/8PSK
demodulation]
(5) User support tools can be provided. [Sample/evaluation boards and software are available.]
◆
Standard Specifications
❇
Contact Sharp for custom design product.
*1 I
2
C-bus is a trademark of Philips Corporation.
Destination Europe/U.S.A./Japan
Input type 1-input 1-input,
single distribution output 1-input
Model No. BS2S7VZ1204 BS2S7VZ0204 BS2S7HZ1204
Input frequency (MHz) 950 to 2 150
Input signal level (dBm) –65 to –25
The 1st intermediate frequency
(MHz) Zero-IF (Direct conversion)
Base band frequency bandwidth 10 to 30, 2.5 MHz step (BB LPF)
RF input local leak (dBm) –63 (MAX.)
AGC linearity (dB/V) 40 BS2S7VZ0204
PLL phase noise
(dBc/Hz)
10 kHz offset –78 (TYP.)
1 kHz offset –60 (TYP.)
Output type I/Q
Channel selection system PLL (I
2
C-bus)*
1
Noise figure (dB) 12 (MAX.)
Tuning voltage (V DC) 30
Supply voltage (V DC) 5, 3.3
LNB power supply DC 25 V, 400 mA (MAX.)
Input impedance (
Ω
)75
Outline dimensions (mm) 39.8
×
35.9
×
11.0 BS2S7HZ1204
D
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 102 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
103
RF Components
DIGITAL DBS FRONT-END UNIT
■
DIGITAL DBS FRONT-END UNITS <QPSK Demodulator Circuit Built-in Type>
◆
Specifications <QPSK Demodulator Circuit Built-in Type>
❇
Contact Sharp for custom design product.
*1 I
2
C-bus is a trademark of Philips Corporation.
■
DIGITAL DBS FRONT-END UNIT <8 PSK Demodulator Circuit Built-in Type>
◆
Specifications <8 PSK Demodulator Circuit Built-in Type>
*1 I
2
C-bus is a trademark of Philips Corporation.
Destination Europe/U.S.A./Japan Europe/Japan
Input type 1-input 1-input/RF with loop
through 1-input
Model No. BS2F7VZ1080 BS2F7VZ0184 BS2F7VG0054
Input frequency (MHz) 950 to 2 150
Input signal level (dBm) –65 to –25
The 1st intermediate frequency (MHz)
Zero-IF (Direct conversion) 479.5
IF bandwidth (MHz) 10 to 30, 2.5 MHz step (BB LPF) 36
RF input local leak (dBm) –63 (MAX.)
AGC linearity (dB/V) 40
The 2nd local control method — Fixed BS2F7VZ1080
Output type 8-bit transport
Symbol rate (M baud) 30 (MAX.) 45 (MAX.) 30 (MAX.)
BER (Viterbi output) Eb/No = 5.5 dB (Max.) [PR = 3/4, BER = 2 x 10
–4
]
Channel selection system PLL (I
2
C-bus)*
1
Noise figure (dB) 12 (MAX.)
Image rejection (dB) — 30 (MIN.)
Tuning voltage (V DC) 30
Supply voltage (V DC) 5, 3.3 5, 3.3, 2.5 5, 3.3
LNB power supply DC 25 V, 400 mA (MAX.)
Input impedance (
Ω
)75 BS2F7VZ0184
Outline dimensions (mm) 70.0
×
35.9
×
11.0 95.0
×
42.0
×
11.0
Destination Japan
Input type 1-input, single distribution output
Model No.
✩
BS2F7VZ0440
Input frequency (MHz) 950 to 2 150
Input signal level (dBm) –65 to –25
The 1st intermediate frequency (MHz)
Zero-IF (Direct conversion)
Base band frequency bandwidth 25 (BB LPF)
RF input local leak (dBm) –63 (MAX.)
AGC linearity (dB/V) 40
Output type 8-bit transport
Symbol rate (M baud) 28.86
Channel selection system PLL (I
2
C-bus)*
1
Noise figure (dB) 8 (TYP.)
Tuning voltage (V DC) 30
Supply voltage (V DC) 5, 3.3, 1.5
LNB power supply DC 25 V, 400 mA (MAX.)
Input impedance (
Ω
)75 BS2F7VZ0440
Outline dimensions (mm) 70.0
×
35.9
×
11.0
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 103 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
104
DBS FRONT-END UNIT FOR ANALOG BROADCASTING
■
DBS FRONT-END UNITS WITH BUILT-IN FM DEMODULATOR <ANALOG>
ide lineup of DBS front-end units to cover worldwide broadcasting regulations and specifications for satellite receiving systems.
◆
Features
(1) A super-compact size to facilitate to make the VCR with the built-in BS compact and to build into the television set.
[volume: 22 cm
3
]
(2) Low-voltage drive, low-power consumption design
(3) Design with the built-in digital AFC output and keyed AFC circuit suitable for HDTV
◆
Specifications
*1 A value specified in “Satellite Broadcasting Receiving Equipment Test”, Vol. 3 issued by Dempa Gijutsu Kyokai Inc.
*2 DC 9 V type of tuning voltage is also available.
*3 I
2
C-bus is a trademark of Philips Corporation.
Note:
• Standard test signals are as follows. Japan: NTSC dev. = 17 MHzp-p / Europe: PAL dev. = 16 MHzp-p / USA: NTSC dev. = 21.5 MHzp-p.
• Custom specs for models other than those listed above, including an introduction to our current 35 cm
3
(35 cc) type models, can be arranged through special consultation.
[“Custom specs” refers to whether LT (low threshold), a prescaler (including difference of dividing ratios) or a PLL are necessary or not, what the IF band width should
be, and other features that differ from the standard specs.]
Destination Europe Japan (For TV)
Type 1-input (wide band) 2-input (wide band) BS 1-input (1-band)
Model No. BS2D7VG1111 BS2D7VG2121 BS2T1VE1016
Input frequency (MHz) 900 to 2 150 1 035.98 to 1 331.5
Input signal level (dBm) –60 to –30 –65 to –28
Output baseband frequency 50 Hz to 10.5 MHz 50 Hz to 9 MHz
Intermediate frequency (MHz) 479.5 402.78
IF Bandwidth (MHz) 27 27/18 31
Channel selection system PLL (I
2
C-bus)*
3
<22 cm
3
> 2-input type
Input terminal isolation (dB) – 40 (TYP.) –
S/N (C/N = 14 dB) (dB) 35 (MIN.) 37 (MIN.)
Image rejection (dB) 40 (TYP.) 55 (MIN.)*
1
Video output level (Vp-p) – 1.0
DET output level (Vp-p) – 1.34
Audio output level (Vrms) (FS) – 0.85
Tuning voltage (V DC) 30 12*
2
Supply voltage (V DC) 5
LNB power supply DC 25 V 400 mA (MAX.) DC 15 V, 350 mA (MAX.)
Input impedance (
Ω
)75 <32 cm
3
>
Video and audio processing type
Outline dimensions (mm) 51.5
×
41.4
×
10.4 70.0
×
42.0
×
11.0
W
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 104 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
105
RF Components
DIGITAL TERRESTRIAL/CATV FRONT-END UNIT
✩
New product
★
Under development
■
FRONT-END UNITS FOR DTV
◆
Features
(1) Baseband, low-IF and direct-IF output systems are available.
(2) High interruption protection performance thanks to the double conversion system and built-in SAW filter.
(3) High output voltage level which can be directly input to an A/D converter.
◆
Specifications
*1 I
2
C-bus is a trademark of Philips Corporation.
■
FRONT-END UNITS FOR DVB-T/DVB-C
◆
Features
(1) Transport stream output front-end units with built-in OFDM demodulation IC and FEC IC. [VA1T5ED5018]
(2) Transport stream output front-end units with built-in QAM demodulation IC and FEC IC. [VH2K3ED7028]
(3) Covering all European regions by 2k (U.K.) and 8k (outside U.K.) Standards compatibility [Front-end units for DVB-T].
(4) Compact, low power consumption.
(5) Compatible with various types of chassis forms (vertical, horizontal type), loop-through circuit (with/without), input connectors
(F connectors/DIN connectors) etc.
◆
Standard Specifications
*1 I
2
C-bus is a trademark of Philips Corporation.
Destination U.S.A./Korea/Taiwan
Model No. VA1D3UF1009 VA1D2UF3003 VA1D1UF3012
Input frequency (MHz) 54 to 806
Output Differential baseband
output
Differential Low-IF output
(5.38 MHz)
Differential IF output
(44 MHz)
Noise figure (dB) 10 (MAX.)
Phase noise –82 dBc/Hz @ 20 kHz offset (MAX.)
Image rejection (dB) 55 (MAX.)
AGC range 70 dB (MIN.) RF AGC + IF AGC
Channel selection/control system PLL (I
2
C-bus)*
1
Supply voltage (V DC) 5, 9, 32 5, 32 VA1D3UF1009
Outline dimensions (mm) 94.0 x 40.9 x 13.0
Destination Europe/Asia Europe/Asia Europe/China
Product name DVB-T front end DVB-T front end
(RF only) DVB-C front end
Model No.
✩
VA1T5ED5018
★
VA1S1ED5010
✩
VH2K3ED7028
Input frequency (MHz) 47 to 862 47 to 862 110 to 860
Output
Transport stream
(Built-in OFDM
demodulation)
Direct IF
Transport stream
(Built-in QAM
demodulation)
Mode 2k, 8k — 16, 32, 64, 128, 256 QAM
Input sensitivity –78 dBm (TYP.)
[at 8k, 64QAM] —–20 dBmV (TYP.)
[at 64QAM, C/N = 28 dB]
Noise figure (dB) 6 (TYP.)
Phase noise 60 dBc/Hz
@ 1 kHz offset (TYP.)
65 dBc/Hz
@ 1 kHz offset (TYP.)
60 dBc/Hz
@ 1 kHz offset (TYP.)
Image rejection (dB) 65 (TYP.)
C/N 19.2 dB (TYP.)
input level: –50 dBm —24.8 dB (TYP.)
input level: 0 dBmV
Channel selection/control system I
2
C-bus*
1
Power consumption (W) 2.4 0.6 1.6
Supply voltage (V DC) 5, 3.3, 2.5, 30 5, 30 5, 3.3, 30 VA1T5ED5018
Outline dimensions (mm) 87.2 x 37.2 x 12.0 50.6 x 43.3 x 13.4 87.2 x 37.2 x 12.0
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 105 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
106
DIGITAL CATV FRONT-END UNIT
✩
New product
★
Under development
■
DIGITAL CATV FRONT-END UNITS <Single Conversion Type>
◆
Features
(1) Miniaturization for thin and compact configuration of onboard sets
(2) Built-in diplexer, input buffer amp and SAW filter.
(3) Conformable to the DOCSIS standards (for USA models)
◆
Specifications
*1 I
2
C-bus is a trademark of Philips Corporation.
■
DIGITAL CATV FRONT-END UNIT <Double Conversion Type>
◆
Features
(1) Thin and compact configuration (Volume for circuit portion: 23 cm
3
, thickness: 13 mm)
(2) Conformable to the set-top box standards (open cable)
(3) Wide reception bandwidth (54 to 860 MHz) for digital service band area
(4) Low power consumption design for energy savings (1.3 W TYP.)
◆
Specifications
*1 I
2
C-bus is a trademark of Philips Corporation.
Destination U.S.A. Europe
Model No.
✩
VH2A7UF2016 VH2F7UF2021
✩
VH2G7UF2047
★
VH2N7MF2101
✩
VH2G3ED7035
Features Direct IF output Direct IF output
Built-in SAW, IF amp.
Direct IF output
Built-in SAW,
IF AGC amp.
Direct IF output
Built-in return pass amp.
Built-in DC-DC
Direct IF output
with Loop through
Input frequency (MHz) 54 to 860 88 to 860 47 to 866
Output frequency (MHz) 43.75 43.75 36.15
Conversion gain (dB) 28 (MIN.) 28 (MIN.) 60 (MIN.) 70 (MIN.) 60 (MIN.)
Return pass voltage gain (dB) – 26 (MIN.) –
Noise figure (dB) 7 (TYP.) 7.5 (TYP.) 7 (TYP.)
Return pass frequency (MHz) 5 to 42 –
Cross modulation rejection (dBc)
–50 (MAX.)
Intermodulation (dBc) –50 (MAX.)
Input return loss (dB) 6 (MIN.)
Phase noise (dBc/Hz)
–90 (TYP.) at 10 kHz offset –92 (TYP.)
at 10 kHz offset
–90 (TYP.)
at 10 kHz offset
Return pass harmonic distortion (dB)
– –47 (MAX.) –
Channel selection system PLL (I
2
C-bus)*
1
Supply voltage (V DC) B: 5, BT: 30 B: 5 B: 5, BT: 30
Outline dimensions (mm)
70.0
×
32.0
×
9.2 85.0
×
32.0
×
9.2 85.0
×
36.0
×
11.8 85.0
×
32.0
×
9.2
VH2A7UF2016 VH2G3ED7035
Destination U.S.A.
Model No. VH1B1UF3006
Features Built-in upstream/downstream terminals
Input frequency (MHz) 54 to 860
Upstream frequency range (MHz) 5 to 27
Downstream frequency range (MHz) 70 to 130
Output frequency (MHz) 44
Conversion gain (dB) 30 (TYP.)
Noise figure (dB) 10 (MAX.)
Cross modulation rejection (dBc) –60 (TYP.)
Intermodulation (dBc) –60 (TYP.)
Input return loss (dB) 7 (MIN.)
Phase noise (dBc/Hz) –84 (MAX.) at 10kHz offset
PLL interface I
2
C bus*
1
VH1B1UF3006
Supply voltage (V DC) 5, 9, 30
Outline dimensions (mm) 69.4
×
36.6
×
9.2
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 106 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
107
RF Components
THREE-IN-ONE RF UNIT
■
THREE-IN-ONE RF UNITS
(RF FRONT-END UNIT + PIF UNIT + RF MODULATOR* INTEGRATED UNIT)
composite unit of integrating three units of the RF
front-end unit, the PIF unit and the RF modulator, being
high-frequency basic circuits of the video deck, etc., unite in
a compact configuration. It helps to save the set’s space,
shorten the development period and improve the design
flexibility and productivity.
◆
Features
(1) A compact all-in-one RF unit has achieved drastic saving
of the set’s space.
(2) Enables to shorten the development period for the set and
to eliminate adjustment work in the production process.
[Matching (PIF frequency/delay AGC) adjustment of the three units are not necessary]
◆
Specifications
❇
Figures in brackets indicate the dimensions including PCB overhang.
*1 I
2
C-bus is a trademark of Philips Corporation.
TV system PAL B/G NTSC-M (US)
Model No. VTDT5ED204 VT4U5UF218
Receiving channels (ch)
VHF UHF VHF UHF
Air CATV
21 to C57
Air CATV
14 to 69
1A to 12 X to S41 2 to 13 A5 to W+84
Band split
V
L
: 1A to S7
V
H
: S8 to S37
UHF: S38 to C57
V
L
: 2 to 6
V
H
: 7 to 13
UHF: 14 to 69
Intermediate frequency (MHz) Video 38.9 45.75
Audio 33.4 41.25
Channel selection system PLL(I
2
C)*
1
Detection system PLL synchronization detection system, Inter-carrier sound receiving system
RF
front-end
Image rejection (dB) Air: 65
CATV: 60 65 Air: 65
CATV: 60 55
IF rejection (dB) V
L
: 60
V
H
: 100 100 V
L
: 75
V
H
: 90 90
IF
Video output level (Vp-p) 1.0 1.0
Video output S/N (dB) 46 47
Audio output level 2.19 Vp-p 480 mVrms
Audio output S/N (dB) 49 52
Modulator
Video output modulation (%) 78 77
Video output S/N (dB) 50 55
Audio output modulation (kHz) ±40 ±22.5
Audio output S/N (dB) 50 56
RF output P/S (dB) 16 16
Transmitting channel 22 to 68 3, 4
Output channel switching type PLL frequency synthesizer (I
2
C)*
1
Electronic switch
Supply voltage (V DC) BT: 32/BP, BM, BP: 5 BT: 33/BM, BP, B: 5
Outline dimensions (mm) 85.8
×
43.0
×
11.2 85.8
×
43.0
×
11.2
A
❇ Some models do not integrate RF modulator.
VT4U5UF218
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 107 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
108
TWO-IN-ONE RF UNIT
■
TWO-IN-ONE RF UNITS (RF FRONT-END UNIT + PIF UNIT)
◆
Features
(1) High performance RF front-end unit and PIF unit are integrated in one unit, resulting in a short developing time.
(2) A composite unit structure improves operability during mounting.
(3) Line-up includes horizontal shaped models for LCD TVs/LCD Monitors.
◆
Specifications
*1 I
2
C-bus is a trademark of Philips Corporation.
TV system Japan U.S.A. Asia
Model No. VT2U5JF553 VT2U5UF553 VT2U5CD553
Receiving channels (ch)
VHF UHF VHF UHF VHF UHF
Air CATV CATV Air Air CATV CATV Air Air CATV CATV Air
1 to 12 C13 to
C38 — 13 to 62 2 to 13 A-5 to
W+11
W+12 to
W+84 14 to 69 1 to 12 1A, Z1 to
Z33
Z34 to
Z38 13 to 57
Band split
BL: 1 to 3, C13 to C22
BH: 4 to 12, C23 to C38
BU: 13 to 62
BL: 2 to 6, A-5 to B
BH: 7 to 13, C to W+11
BU: 14 to 69, W+12 to W+84
BL: 1 to 5, 1A, Z1 to Z4
BH: 6 to 12, Z5 to Z33
BU: 13 to 57, Z34 to Z38
Intermediate frequency (MHz) Video 58.75 45.75 38.0
Audio 54.25 41.25 D/K: 31.5, I: 32.0, B/G: 32.5, M/N: 33.5
Detection system Pseudo synchronization detection system, split-carr ier audio receiving system
Te r minals Input: F-type junction Input: F-type junction Input: DIN type terminal
Input impedance (
Ω
) 75
B voltage (V DC) BM: 5/BP: 5/BT: 31.5 BM: 5/BP: 5/BT: 31 BM: 5/BP: 5/BT: 31
RF
front-end
Noise figure (dB) 4 5 5 4.5 56665667
Type CATV compatible
Channel selection system PLL frequency synthesizer (I
2
C)*
1
Image rejection (dB) V
L
: 85, V
H
: 75 75 V
L
: 75, A5 to I: 85,
J to W+84: 60 60 V
L
: 70, V
H
: 70 60
IF rejection (dB) V
L
: 100, V
H
: 100 100 V
L
: 90, V
H
: 100 100 V
L
: 50 to 70, V
H
: 90 90
IF
Video output level (Vp-p) 1.8 1.0 1.0
Video output S/N (dB) 46 46 44
Noise limit sensitivity (dBµ)
at S/N = 30 dB 44 44 42
Audio output level (mVrms) 290 290 290
Audio output S/N (dB) 55 52 45
Audio frequency
characteristics (at 70 kHz) –0 –2 –0
Outline dimensions (mm) 70.0
×
43.3
×
12.0
VT2U5UF553 VT2U5CD553
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 108 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
109
RF Components
ANALOG TERRESTRIAL RF FRONT-END UNIT
✩
New product
■
RF FRONT-END UNITS <VTST Series>
◆
Features
(1)
Miniature size achieved using thin profile, low height design in industry standard RF front-end unit (terminal shape and terminal pin arrays)
(Circuit area of 20 cm
3
contributes to space saving, miniature design in onboard set products)
(2) Model lineup corresponding to domestic product standards of Europe, China, Japan and the United States.
◆
Specifications (Major models of VTST series)
■
ULTRA COMPACT FRONT-END UNITS <VT2V Series>
◆
Features
(1) Compact and thin design suitable for building into a portable unit with LCD monitor. (Circuit area of 11.4 cm
3
)
(2) Contribute to simplifying developing process and saving space thanks to the built-in VIF/SIF circuit.
◆
Specifications
F-type junction input type With RF output terminal type
Destination Europe U.S.A. China Japan
Type Hyper, for frequency
synthesizer
With PLL, for frequency
synthesizer, F-type junction input
CiSPR-compatible, hyper,
for voltage synthesizer
With PLL, for frequency
synthesizer
With PLL, for frequency
synthesizer, with RF output
Model No. VTST5HD970 VTST5UF740 VTST5HD950 VTST5JF540 VTST5JB540
Receiving channel (ch)
VHF UHF VHF UHF VHF UHF VHF UHF VHF UHF
Air CATV
21 to
C57
Air CATV
14 to 69
Air CATV 13 to 57
Z34 to
Z38
Air CATV
13 to 62
Air CATV
13 to 62
2 to 12 X to S41 2 to 13
A–5 to
W + 84
(A–8)
1 to 12 Z1 to
Z33 1 to 12 C13 to
C38 1 to 12 C13 to
C38
Band split
B1: 2 to S6
B2: S7 to S36
B3: S37 to C57
B1: 2 to B
B2: C to W+11
B3: W+12 to 69
B1: 1 to 5, Z1 to Z4
B2: 6 to 12, Z5 to Z33
B3: Z34 to Z38
BL: 1 to C14
BH: C15 to C38 BU: BL: 1 to C14
BH: C15 to C38 BU:
Intermediate
frequency (MHz)
Video 38.9 45.75 38.0 58.75
Audio 33.4 41.25 31.5 54.25
B voltage (V DC) 5 5 5 5
Input impedance (
Ω
) 75
VSWR 2 2 2 1.5 1.5 1.5 2 2 2 2 2 2 2 2 2
Noise figure (dB) 5 7 6 5 6 5 5 7 6 4 5 4.5 8 9 8.5
Power gain (dB) 40 38 40 39 39 37 40 38 40 40 37 40 36 33 36
Image rejection (dB) VL: 70
VH: 65 60 VL: 70
VH: 65 70 VL: 70
VH: 65 60 VL: 85
VH: 85 80 VL: 85
VH: 85 80
IF rejection (dB) VL: 70
VH: 90 90 VL: 70
VH: 90 90 VL: 60
VH: 90 90 VL: 80
VH: 100 100 VL: 85
VH: 100 100
Outline dimensions (mm)
53.0
×
39.5
×
11.5
Destination Japan Japan/U.S.A.
Model No.
✩
VT2V5JP5550
✩
VT2V8UP5510
Receiving channel
VHF UHF VHF UHF CATV FM Radio
1 to 12 13 to 62
JPN:
1 to 12
USA:
2 to 13
JPN:
13 to 62
USA:
14 to 69
JPN:
C13 to C63
USA:
A-5 to W+84
JPN: 76 to
90 MHz
USA: 88 to
108 MHz
The 1st intermediate
frequency (MHz)
Video 58.75 45.75
Audio 54.25 41.25
Supply voltage (V DC) 5, 31
5 single (DC-DC converter)
Power consumption (W) 0.75 (TYP.) 0.8 (TYP.)
Input impedance (
Ω
)75
Video S/N (dB) 50 (TYP.) 50 (TYP.)
Audio S/N (dB) 48 (TYP.) 53 (TYP.)
Noise limit sensitivity (dB) 42 (TYP.) 42 (TYP.)
Video frequency characteristics –1.0 dB (TYP.) at 3.58 MHz –1.0 dB (TYP.) at 3.58 MHz
Audio frequency characteristics 0 dB (TYP.) at 80 kHz –1.5 dB (TYP.) at 80 kHz VT2V8UP5510
Outline dimensions (mm) 49.9
×
28.0
×
7.7
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 109 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
110
RF MODULATOR
★
Under development
■
RF MODULATORS
arious types with a modulator function adding RF switch, booster mixer functions are available. The compact design that enables
direct mounting on the mother board in the set allows a wider application to VCRs, video disks, BS and CATV equipment.
◆
Specifications
◆
Outline Dimensions
Destination Multi (4-broadcast type) U.S.A.
Type Compact with PLL
Compact with PLL, Tuner out
Compact, electrical switch type
Model No. VT5F1YT0005 VT5F1YT0024
★
VT5F9MN0027
TV system broadcast method
PAL-G/I/K/M NTSC-M
General
ANT input UHF/VHF
Output impedance (
Ω
)
75 unbalanced
Output channel (ch) 21 to 69 variable US 3, 4
Audio carrier frequency (MHz)
4.5/5.5/6.0/6.5 4.5
Supply voltage (V DC)
5, 30 5
Video
Video modulation (%)
80 ±6 78 ±7
S/N (dB) 45 (MIN.) 50 (MIN.)
V/S V/S = 7/3 V/S = 7/3
Audio
Audio modulation (%)
M: 100 ±28 (100% = ±25 kHz)
G/I/K: 100 ±24 (100% = ±50 kHz) 100 ±20 (100% = ±25 kHz)
S/N (dB) 45 (MIN.) 47 (MIN.) VT5F1YT0024
Distortion (%) 3.0 (MAX.) 3.0 (MAX.)
Outline dimensions (mm)
43
×
25.5
×
11.2 (circuit portion)
V
1 2 3 4 5 6
TERMINAL No.
TERMINAL NAME BT +B SDA SCL AUDIO IN VIDEO IN
VT5F1YT0024
1 2 3 4 5 6
TERMINAL No.
TERMINAL NAME BT +B SDA SCL AUDIO IN VIDEO IN
VT5F1YT0005/(VT5F9MN0027)
Tuner Out
11.2
13.2
46.5
45.5
38.0
24.0
10.0
3.5
3.0
14.2
26.9
25.5
43.0
44.4
1 2 3 4 5 6
11.2
13.2
46.5
45.5
38.0
24.0
10.0
3.5
3.0
14.2
26.9 6.8
25.5
43.0
44.4
1 2 3 4 5 6
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 110 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
111
RF Components
SS WIRELESS COMMUNICATION UNIT
✩
New product
■
SS WIRELESS COMMUNICATION UNITS
◆
Features
(1) Achieves high-speed communication conforming to wireless LAN standard IEEE 802.11b [11 Mbps: DC2A1AZ014]
(2) Compact package for compact equipment design (10.5 cm
3
: DC2A1AZ004/DC2A1AZ014)
(3) Improved phasing resistance characteristics by using equalizer circuit base band IC [DC2A1AZ014]
(4) Improves throughput of communications, thanks to a unique multiple channel system (2 Mbps
×
7 (23 channels*
1
) multiple channels:
DC2A1AZ001)
(5) Low power consumption for battery operation of portable equipment
◆
Specifications
*1 Number of channels which can be used may differ according to the country’s laws.
*2 Communication distances may differ due to the conditions to be used. Take the values herein as references.
Compatible standards IEEE 802.11 compatible IEEE 802.11 compatible IEEE 802.11b compatible
Model No. DC2A1AZ001 DC2A1AZ004
✩
DC2A1AZ014
Communication frequency range (GHz) 2.400 GHz to 2.497 GHz 2.400 GHz to 2.497 GHz 2.400 GHz to 2.497 GHz
No. of communication channels*
1
7 ch at 2471-2497 MHz band
23 ch at 2400-2483.5 MHz band 3 ch 14 ch
(channel span over 30 MHz)
Transmission output (mW/MHz) 10 or less
Communication system Half duplex
Modulation system Wave width phase modulation system CCK, DQPSK, DBPSK
Spectrum distribution system Delay multiple system with direct distribution Direct distribution system
Distribution ratio
×
11 (baseband)
Data transfer rate (Mbps) 2 (MAX.) 10 (MAX.) 11 (MAX.)
Multi rate
(by multiple channel selection)
200 kbps/400 kbps/600 kbps/800 kbps
1.0 Mbps/1.2 Mbps/1.6 Mbps/2.0 Mbps 1/2/3/4/5/6/8/10 Mbps 1/2/5.5/11 Mbps
Communication distance*
2
Indoor: 50 m/Insight: 100 m (TYP.) Indoor: 30 m/Insight: 50 m (TYP.) Indoor: 30 m/Insight: 50 m (TYP.)
Supply voltage (V DC) 3.3
Current consumption
Transmission: 280 mA (TYP.)
Reception: 170 mA (TYP.)
Sleep: 10 mA (TYP.)
Transmission: 380 mA (TYP.)
Reception: 240 mA (TYP.)
Sleep: 15 mA (TYP.)
Transmission: 290 mA (TYP.)
Reception: 170 mA (TYP.)
Sleep: 15 mA (TYP.)
Outline dimensions (mm) 51.3
×
42.3
×
7.6
(Excluding bumps and others)
51.3
×
41.9
×
4.9
(Excluding bumps and others)
51.3
×
41.9
×
5.0
(Excluding bumps and others)
Weight (g) Approx. 24 Approx. 17 Approx. 17
DC2A1AZ001 DC2A1AZ004 DC2A1AZ014
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 111 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
112
SS WIRELESS LAN CARD
✩
New product
■
SS WIRELESS LAN CARDS
◆
Features
(1) Achieves high-speed communication conforming to wireless LAN standard IEEE 802.11b [11 Mbps: DC2B1AZ019]
(2) Improved phasing resistance characteristics by using equalizer circuit base band IC [DC2B1AZ019]
(3) Compact design with built-in diversity antenna [PCMCIA Type II compatible]
(4) Low power consumption
◆
Specifications
*1 Number of channels which can be used may differ according to the country’s lows.
*2 Communication distances may differ due to the conditions to be used. Take the values here in as references.
Compatible standards etc. IEEE 802.11 compatible IEEE 802.11b compatible
Model No. DC2B1AZ010
✩
DC2B1AZ019
Communication frequency range (GHz) 2.400 GHz to 2.4835 GHz 2.400 GHz to 2.497 GHz
No. of communication channels*
1
3 ch
Transmission output (mW/MHz) 10 or less
Communication system Half duplex
Modulation system Wave width phase modulation system BPSK, QPSK, CCK
Spectrum distribution system Delay multiple system with direct distribution Direct distribution (DSSS) system
Data transfer ratio (Mbps) 10 (MAX.) 11 (MAX.)
Data transfer rate (Mbps) 1 (DBPSK)/2 (DQPSK)/10 (Sharp’s system) 1 (DBPSK), 2 (DQPSK), 5.5/11 (CCK)
Communication distance*
2
Indoor: 50 m/Insight: 100 m (TYP.) — at 2 Mbps mode
Indoor: 30 m/Insight: 50 m (TYP.) — at 10 Mbps mode
Indoor: 50 m/Insight: 100 m (TYP.) — at 2 Mbps mode
Indoor: 35 m/Insight: 60 m (TYP.) — at 11 Mbps mode
Antenna system Diversity with built-in 2 PIFA antenna
(With external antenna connector) Diversity with built-in 2 antenna
Supply voltage (V DC) 5.0 3.3
Current consumption
Transmission: 430 mA (TYP.)
Reception: 340 mA (TYP.)
Sleep: 120 mA (TYP.)
Transmission: 330 mA (TYP.)
Reception: 190 mA (TYP.)
Outline dimensions (mm) 125.5
×
54.0
×
9.0 110.1
×
54.0
×
7.2
Weight (g) Approx. 60 Approx. 40
DC2B1AZ010 DC2B1AZ019
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 112 ページ ２００１年９月２３日 日曜日 午後１時４５分
RF
113
RF Components
BLUETOOTH™ CF CARD/MODULE
✩
New product
★
Under development
■
Bluetooth™ CF CARD TYPES
◆
Features
(1) Bluetooth™ standard v1.1 compatible
(2) Built-in super compact antenna
(3) CompactFlash standard ver.1.4 compatible
◆
Specifications
*1 Communication distances may differ due to the conditions to be used. Take the values herein as references.
Note: CompactFlash is a trademark of SanDisk Corporation.
■
Bluetooth™ MODULES
◆
Features
(1) Bluetooth™ standard v1.1 compatible
(2) Super compact, surface mount type
(3) Compatible with 2 types of interface
Model for UART*
2
→
DC2D1BZ001
Model for USB*
3
→
DC2D1BZ003
◆
Specifications
*2 UART: Universal Asynchronous Receiver Transmitter
*3 USB: Universal Serial Bus
Bluetooth is a property owned by its trademark right holders.
Compatible standards Bluetooth™ standard v1.1
Power Class 3
Bluetooth™ standard v1.1
Power Class 1
Model No.
✩
DC2C1BZ001
★
DC2C1BZ002
Communication frequency range (MHz) 2,402 to 2,480
No. of communication channels 79 ch
Channel interval 1 MHz
Transmission output (dBm) 0 or less 20 or less
Modulation system GFSK
Communication system TDD
Distribution system Frequency hopping: 1600 hops/s
Data transfer ratio (MAX.) 1 Mbit/s
Antenna system Built-in inverted F type antenna
Communication distance*
1
10 m (TYP.) Insight: 100 m (TYP.)
Supply voltage (VDC) 3.3
Current consumption (mA) Transmission: 85, Reception: 86 Transmission: 165, Reception: 86
Outline dimensions (mm) 42.8
×
49.4
×
3.3 DC2C1BZ001
Weight (g) Approx. 13 Approx. 13
Compatible standards Bluetooth™ standard v1.1 power class 3
<Type> <built-in base band> <without base band>
Model No.
✩
DC2D1BZ001
✩
DC2D1BZ003
✩
DC2D1BZ002
Communication frequency range (MHz) 2,402 to 2,480
No. of communication channels 79 ch
Channel interval 1 MHz
Transmission output 0 or less
Receiving sensitivity –85 dBm (TYP.)/(target) DC2D1BZ001
Modulation system GFSK
Communication system Half duplex
Distribution system Frequency hopping: 1600 hops/s
Antenna External
Supply voltage (VDC) 3.0
Current consumption (mA) Transmission: 85, Reception: 85 Tr ansmission: 46,
Reception: 57
Output interface UART*
2
USB*
3
Sharp specification
Outline dimensions (mm) 15.5
×
15.5
×
2.5 16.0
×
13.8
×
2.5 DC2D1BZ002
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
E099_113.fm 113 ページ ２００１年９月２３日 日曜日 午後１時４５分
