Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 1/10 Low Resistance (Standard) 1. Scope : This specification applies for the RL series of thick film chip resistors made by TA-I. Conductor 2. Construction: Over Coat Sn Plating Resistive Element Ni Plating Ceramic Substrate 3. Type Designation: RL 10 Product Code RL : Chip Resistor Size F TN R100 Tolerance Packaging Nominal Power Rating Resistance 06-0603 1/8W J- 5% TN-Lead Free & 3 Digits e.g., 10-0805 1/4W G- 2% Paper Tape (E24) R10=0.1 12-1206 1/2W F- 1% EN-Lead Free & 4 Digits e.g., Embossed Tape (E96) R100=0.1 20-2010 3/4W 25-2512 1W TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 2/10 Low Resistance (Standard) 4. Dimensions: UNIT: mm STYLE L W C d t RL06 1.60 0.10 0.80 0.10 0.30 0.20 0.35 0.20 0.45 0.10 RL10 2.00 0.10 1.25 0.10 0.40 0.20 0.35 0.20 0.50 0.10 RL12 3.10 0.20 1.55 0.10 0.50 0.30 0.40 0.20 0.55 0.10 RL20 5.00 0.20 2.50 0.20 0.60 0.30 0.50 0.25 0.55 0.10 RL25 6.30 0.20 3.20 0.20 0.60 0.30 0.50 0.25 0.55 0.10 5.Electrical characteristics : Feature Characteristics Measurement Method RL06 RL10 RL12 RL20 RL25 Power Ratings (W) 1/8W 1/4W 1/2W 3/4W Resistance Value (m) o T.C.R (ppm/ C) o 1W JIS Code 3A / JIS Code 3D 100 ~ 910 Refer to JIS C 5202 5.1 200 Refer to JIS C 5202 5.2 Operation Temperature Range ( C) -55 ~ +125 Resistance Tolerance (%) 1, 2, 5 JIS C 5201 4.2.5 Insulation Resistance (M) Over 100 Refer to JIS C 5202 5.6 Mounting condition G Maximum Working Voltage (V) 1/2 ( P * R) TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 3/10 Low Resistance (Standard) Note : Except for the above standardized products, we also provide the customized products. 5.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated in accordance with figure 1. 100 Power ratio ( % ) 50 0 -55 50 Ambient 70 100 125 Temp. ( C ) Figure 1 6. Reliability Test:(As specified in JIS C 5202) Reference standard Condition of Test Test Limits Temperature Coefficient of Resistance JIS-C5202-5.2 -55 ~ +125 Refer to paragraph 5 Short Time Overload JIS-C5202-5.5 2.5 X rated voltage, 5s 1%: (1%+0.005 ) 2%,5%: (3%+0.005 ) Load Life JIS-C5202-7.10 1000 hours at rated power , 70 , 1.5hours "ON ", 0.5hour "OFF" 1%: (1%+0.001 ) Load Life with Humidity JIS-C5202-7.9 1000 hours at rated power , 40 2, 90~95% RH 1.5hours "ON ", 0.5hour "OFF" 1%: (1%+0.001 ) Rapid Change of Temperature JIS-C5202-7.4 -55 (30 min. ) / +125 (30 min. ) 5 cycles 1%+0.005 Resistance to Soldering Heat JIS-C5202-6.10 270 5 solder , 10 1 sec dwell . 1%+0.005 Solderability JIS-C5202-6.11 235 5 solder, 2 0.5 sec dwell. At least 95% of surface area of electrode shall be covered with new solder. Robustness of Termination (Bending Strength) JIS-C5202-6.1 3mm deflection 1%+0.005U Resistance to Dry Heat JIS-C5202-7.2 125 5 for 96 4hrs 1%: (1%+0.005 ) 2%,5%: (2%+0.005 ) Test Item 2%,5%: (3%+0.001 ) 2%,5%: (3%+0.001 ) Note* :RCWV : Rated continuous working voltage . TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 4/10 Low Resistance (Standard) 7. Marking 7.1 Type: 0805,1206,2010,2512 7.1.1 E96: 1% Resistance value is expressed by 4 digits, the first "R" means decimal point and the other digits represent for the normal resistance in . e.g., 7.1.2 R100 =100 m E24: 2%,5% Resistance value is expressed by 3 digits, the first "R" means decimal point and the other digits represent for the normal resistance in. e.g., R10 =100 m 7.2 Type: 0603 7.2.1 E96: 1% When the marking space is too small in such small-sized resistors as RL06, the marking can not made by 4 digits and may be made by two digits combined with one English capital. Significant figures of nominal resistance Symbol 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E24 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 E96 100 110 130 150 200 750 Symbol for multipliers TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 5/10 Low Resistance (Standard) Symbol multipliers A 0 10 B 1 10 C 2 10 e.g., D 3 10 E 4 10 F 5 10 G 6 10 H 7 10 X -1 10 Y -2 10 Z -3 10 -3 01Z=100 x10 =100 m Notes : When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series is used as mark . e.g., 7.2.2 0603 : 120m, 1% Marking is 012 E24: 2%,5% Resistance value is expressed by 3 digits, the first "0" means decimal point and the other digits represent for the normal resistance in. e.g., 010 =100 m 8. Taping & Reel 8.1 Taping Dimensions 8.1.1 4 mm pitch paper Packing Type RL06 Paper Tape RL10 RL12 A 1.1 0.1 B W F E P1 P2 P0 D0 1.9 0.1 1.6 0.15 2.4 0.2 2.0 0.15 3.6 0.2 +0.1 8.0 0.2 3.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 T 0.64 0.1 4.0 0.1 1.5 -0 0.84 0.1 UNIT: mm TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 6/10 Low Resistance (Standard) 8.1.2 2 mm pitch paper Packing Style A B W F E P1 P2 P0 D0 T +0.1 Paper Tape RL06 8.1.3 1.1 0.1 1.9 0.1 8.0 0.2 3.5 0.05 1.75 0.1 2.0 0.1 2.0 0.1 4.0 0.1 1.5 0.64 0.1 -0 4 mm pitch Emboss Packing Type Emboss RL20 RL25 A B 2.8 0.2 5.3 0.2 3.6 0.2 6.9 0.2 W F E P1 P2 P0 D0 T +0.1 12.0 0.2 5.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 4.0 0.05 1.5 0.85 0.15 -0 Paper Tape Type Size RL RL RL RL RL 06 10 12 20 25 4 mm pitch 2 mm pitch 180mm/R 180mm/R 5000 5000 5000 Emboss Plastic Tape 4 mm pitch 10000 4000 4000 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 7/10 Low Resistance (Standard) 8.2 Reel Specifications UNIT: mm Series A RL 06 / 10 / 12 RL 20 / 25 180 B +0 -3 60 min C 13.0 1.0 W 9.0 1.0 T 11.4 2.0 13.0 1.0 15.4 2.0 8.3 Storage Conditions: The resistors with appropriate package would have a preservative duration of 1 year. Temperature: 5~35,Humidity:40%~75% 8.4. Peel - off force : Peel - off force of paper and blister tape is in accordance with "JIS " that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300 mm/min top cover tape 10 ~ 15 standard: 0.1 ~ 0.7 N carrier tape TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 8/10 Low Resistance (Standard) 9. Label Date Code Resistance Tolerance Type QTY: 5000 PCS 0.01 Lot No: 0081166K- 0008 JTN 0805 Manufacture Label Lead-Free Packaging 10. Recommended land patterns Land pattern Type RL RL RL RL RL Size 06 (0603 ) 10 (0805 ) 12 (1206 ) 20 (2010 ) 25 (2512 ) a Dimension ( mm ) b c 1.00 1.30 2.20 3.50 4.60 2.00 2.50 4.00 6.30 8.00 0.60 1.05 1.40 2.30 3.00 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 9/10 Low Resistance (Standard) 11.ECN Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 12. Manufacturing Country & City: TA-I TECHNOLOGY CO., LTD. ( Taiwan- Taoyuan ) Tel: 886-3-3246169 Fax : 886-3-3246167 Associated companies : (1) FORTUNE TASK RESISTOR FACTORY ( China - Kwangtung ) Tel : 86-769-3394790 Fax : 86-769-3394794 (2) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China - Jiang-Su ) Tel :86- 512-3457879 Fax : 86-512-3457869 (3) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia - Pulaupinang ) Tel :604- 3900480 Fax : 604-3901481 (4) P.T.TAI ELECTRONICS Indonesia ( Indonesia - Jakarta ) Tel :002-62-21-44820254 Fax : 002-62-21-44820256 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No TRL-XX0S001B Issue d date 2003/09/30 Page 10/10 Low Resistance (Standard) Revise record Date Dec31, 2003 Content 5.Elecfrical characteristics TCR from 250 Change to 200 ppm/ Owner Wen Shen TA-I TECHNOLOGY CO., LTD