Document No TRL-XX0S001B
Issued date 2003/09/30
Thick Film Chip Resistors
Low Resistance (Standard)
Page 3/10
TA-I TECHNOLOGY CO., LTD
Note : Except for the above standardized products, we also provide the customized products.
5.1 Derating Curve :
For resistors operated at ambient temperature over 70℃ , power rating shall be derated in
accordance with figure 1.
100
Power ratio ( % )
50
0
-55 50
70 100 125
Ambient
Temp. (
°
C )
Figure 1
6. Reliability Test:(As specified in JIS C 5202)
Test Item Reference
standard Condition of Test Test Limits
Temperature Coefficient of
Resistance JIS-C5202-5.2 -55 ~ +125℃ Refer to paragraph 5
Short Time Overload JIS-C5202-5.5 2.5 X rated voltage, 5s 1%:± (1%+0.005 Ω )
2%,5%:± (3%+0.005 Ω )
Load Life JIS-C5202-7.10 1000 hours at rated power , 70℃ , 1.5hours
“ON “, 0.5hour “OFF” 1%:± (1%+0.001 Ω )
2%,5%:± (3%+0.001 Ω )
Load Life with Humidity JIS-C5202-7.9 1000 hours at rated power , 40 ± 2℃,
90~95% RH 1.5hours “ON “, 0.5hour “OFF” 1%:± (1%+0.001 Ω )
2%,5%:± (3%+0.001 Ω )
Rapid Change of Temperature JIS-C5202-7.4 -55℃ (30 min. ) / +125 ℃(30 min. ) 5 cycles ± 1%+0.005 Ω
Resistance to Soldering Heat JIS-C5202-6.10 270 ± 5℃ solder , 10 ± 1 sec dwell . 1%+0.005 Ω
Solderability JIS-C5202-6.11 235 ± 5℃ solder, 2 ± 0.5 sec dwell. At least 95% of surface area
of electrode shall be covered
with new solder.
Robustness of Termination
(Bending Strength) JIS-C5202-6.1 3mm deflection ± 1%+0.005Ù
Resistance to Dry Heat JIS-C5202-7.2 125 ± 5℃ for 96 ± 4hrs 1%: ± (1%+0.005 Ω )
2%,5%:± (2%+0.005 Ω )
Note* :RCWV : Rated continuous working voltage .