05001-06N - Grayhill - Datasheet.Live

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Rotary Switches

Single Deck Rotary Switches

SPECIFICATIONS

Electrical Rating

Rated: To make and break the following loads:

1 amp at 115 Vac resistive; 0.5 amp at 220

Vac resistive; 1/4 amp, 115 Vac inductive; 1/50

amp, 115 Vdc inductive, 1/10 amp, 6 to 28

Vdc inductive; 1/10 amp, 115 Vdc resistive; 1

amp, 6 to 28 Vdc resistive; to carry 10 amps

continuously.

Contact Resistance: 10 milliohms initial.

After 25,000 cycles of operation 20 milliohms

maximum.

Insulation Resistance: 50,000 Mohms

minimum initially

Voltage Breakdown: 1,000 Vac (500 Vac, or

better after most environmental tests).

Life Expectancy: 100,000 mechanical cycles

of operation normally.

NOTE: Actual life is determined by a number

of factors, including electrical loading, rate of

rotation, and environment, as well as maximum

contact resistance, minimum insulation

resistance, and minimum voltage breakdown

required at the end of life.

Materials and Finishes

Switch Base: Melamine per MIL-M-14 (ASTM-

D-5948)

Cover, Stop Washers, Bushing: Brass, tin/

zinc-plated

Grayhill part number and date code marked on label. Customer part number marked on request.

DIMENSIONS in inches (and millimeters)

Circuit Diagram

(Switch is viewed from shaft end.)

Note: Common Terminal is located

above Base Terminal 10.

.823 ± .020

(20,90 ± 0,51)

DIA.

.219 ± .005

(5,56 ± 0,13)

36° ± 5°

.564 ± .020

(14,33 ± 0,51)

COMMON

BUSHING

KEYWAY

ONE POLE

SERIES 5000

1" Diameter, 1 Amp, .

470" Behind Panel

FEATURES

•HighQualityataLowPrice

•HighContactForceProvidesStable

Electrical and Mechanical Operation

•ProvenReliabilityinThousandsof

Applications

Mounting Nut:Brass,tin/zinc-platedorstainless

steel

Retaining Rings, Stop Arms, and Thrust

Washers: Stainless steel

Shaft: Stainless steel

Terminals (except common): Brass, tin

plated

Rotor Contact:Phosphorbronze,silver-plated

.0003" minimum

Stator (Base) Contact: Brass, silver-plated

.0003" minimum

Common Plate: Brass, silver-plated .0003"

minimum

Rotor Mounting Plate: Nylon fabric-based

laminated Phenolic per MIL-T-1 5047.

Additional Characteristics

Stop Strength: 12 in-lbs

Rotational Torque:12in-ozs.

Contacts: Shorting or non-shorting wiping

contacts with over 500 grams contact force.

Shaft Flat Orientation: Opposite point of contact

(See circuit diagram.)

Environmental: These switches have passed

the following environmental testing: Altitude and

temperature; 100 hour salt spray; Vibration 10 to

500 cps; Shock 30-G; Humidity; Fungus.

Detent: A formed spring operating against a

formed wave washer.

STANDARD OPTIONS

Special Terminals

Not available through distributors.

ORDERING INFORMATION

The Series 5000 switches are single deck,

one pole switches of two to 10 positions. Ten

position switches have continuous rotation.

Ten position ﬁxed stop switches are available

by special order.

The part number is 05001-XX with the number

of positions required (02,03, etc.) listed in place

of the XX. Complete part number by adding

N for non-shorting contacts or S for shorting

contacts.

Available from your local Grayhill

Distributor.

For prices and discounts, contact a local

SalesOfce,anauthorizedlocal

Distributor or Grayhill.

3/8-32UNEF-2A

THREAD

BUSHING KEYWAY

.066 ± .002 (1,68 ± 0,05) WIDE

.036 ± .005 (0,91 ± 0,13) DEEP

FROM THE .375 (9,53) DIAMETER

.490 ± .020

(12,45 ± 0,51)

1.015 ± .015

(25,78 ± 0,38)

DIA.

TERMINAL 9 IN LINE

WITH KEYWAY

.823 ± .015

(20,9 ± 0,38)

.250 + .001/ – .002

(6,35 + 0,03/ – 0,05) DIA.

.250 ± .020

(6,35 ± 0.51)

.250 ± .020

(6,35 ± 0.51)

.312 ± .020

(7,93 ± 0,51)