1.27 mm pitch connector Right-angle through hole type female connector for PCB PCS-XE( )SLFDT( )N( )+ For PCB Right-angle Through hole SCSI-III Configuration of product Part No. PCS-XE ( ) S LFD T ( ) N ( )+ Series name Screw size No. of contacts: 50 or 68 Blank: M2.50.45 Type of shell U : #4-40UNC (standard) S: Short shell U2 : #2-56UNC Type of connector Lock type LFD: Right-angle through hole type, N: Screw lock female Contact plating Board lock pin: Provided Blank: Min. 0.2 m Gold plating G1 : Min. 0.76 m Gold plating HONDA JAPAN 0.8 1.9053 POS.#2 POS.#1 POS.#2 For 68-contact connector + B 0.1 Board-edge 5.705 REF. 4 2.8 1.27 3.4 - LAST POS. POS.#1 C E B + oF 0.1 POS.#2 POS.#1 - POS.#1 + 1.27 0.05 + C 0.1 - Contacts Board lock pin - t = 1.6 mm Components Insulator Shell A + o0.8 0.06 - Recommended PCB layout (Connector side) POS.#2 For 68-contact connector Bracket Shell B 1.9050.053 D 4.37 0.5 LAST POS. 15 16.9 5.905 5.4 2.85 3.2 4-R1 0.40.35 LAST POS. Screw size POS.#2 8.47 1.27 POS.#1 8.2 5.54 2.54 A B C Dimensions Part No. PCS-XE50SLFDT( )N( )+ A 52.5 B 46.5 C 30.48 D 34.70 E 39.28 PCS-XE68SLFDT( )N( )+ 63.9 57.9 41.91 46.13 50.71 Part No. PCS-XE( )SLFDTN( )+ PCS-XE( )SLFDTUN( )+ Because some combinations of "Configurations of Product Part No.", are under PCS-XE( )SLFDTU2N( )+ consideration for development, please contact us for availability details. Screws size M2.50.45 oF 2.8 #4-40UNC 3.05 #2-56UNC 2.5 Mating connectors: PCS-XE series IDC type male connector for cable Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole