International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) C/W Notes Fax-on-Demand D2Pak Standard Recovery D2Pak 10ETS08S 10ETS12S 800 1200 10 10 105 105 1.1 1.1 10 10 170 170 175 175 2.5 2.5 1 1 12 12 10ETS16S 20ETS08S 1600 800 10 20 105 105 1.1 1.1 10 20 170 250 175 260 2.5 1.3 1 1 12 12 82102 20ETS12S 20ETS16S 1200 1600 20 20 105 105 1.1 1.1 20 20 250 250 260 260 1.3 1.3 1 1 12 12 82102 82102 D-Pak 8EWS08S 8EWS12S 800 1200 8 8 95 95 1.1 1.1 8.0 8.0 170 170 175 175 3.0 3.0 1 1 12 12 8EWS16S 1600 8 95 1.1 8.0 170 175 3.0 1 12 TO-220AC (2-pin) 10ETS08 10ETS12 800 1200 10 10 105 105 1.1 1.1 10 10 170 170 175 175 2.5 2.5 12 12 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) C/W Notes Fax-on-Demand TO-220AC (2-pin) Standard Recovery 10ETS16 1600 10 105 1.1 10 170 175 2.5 12 20ETS08 20ETS12 800 1200 20 20 105 105 1.1 1.1 20 20 250 250 260 260 1.3 1.3 12 12 82101 82101 20ETS16 1600 20 105 1.1 20 250 260 1.3 12 82101 TO-247AC (2-pin) 40EPS08 40EPS12 800 1200 40 40 105 105 1.1 1.1 40 40 400 400 380 380 0.60 0.60 12 12 82104 82104 40EPS16 60EPS08 1600 800 40 60 105 105 1.1 1.1 40 60 400 700 380 735 0.60 0.45 12 12 82104 60EPS12 60EPS16 1200 1600 60 60 105 105 1.1 1.1 60 60 700 700 735 735 0.45 0.45 12 12 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I FM (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand SMB Standard Recovery SMB SM4001TR SM4002TR 50 100 1 1 75 75 1.1 1.1 28 28 30 30 30 30 1 1 9 9 12 12 SM4003TR SM4004TR 200 400 1 1 75 75 1.1 1.1 28 28 30 30 30 30 1 1 9 9 12 12 SM4005TR SM4006TR 600 800 1 1 75 75 1.1 1.1 28 28 30 30 30 30 1 1 9 9 12 12 SM4007TR 1000 1 75 1.1 28 30 30 1 9 12 B-47PP 8AF05NPP 50 50 150 1.45 600 628 0.6 9 12 16 20086 8AF1NPP 8AF2NPP 100 200 50 50 150 150 1.45 1.45 600 600 628 628 0.6 0.6 9 9 12 16 12 16 20086 20086 8AF4NPP 400 50 150 1.45 600 628 0.6 9 12 16 20086 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AA (DO-4) Standard Recovery DO-203AA (DO-4) 6F10 6F20 100 200 6 6 158 158 1.1 1.1 134 134 141 141 2.5 2.5 9 9 12 17 18 12 17 18 20009 20009 6F40 6F60 400 600 6 6 158 158 1.1 1.1 134 134 141 141 2.5 2.5 9 9 12 17 18 12 17 18 20009 20009 6F80 6F100 800 1000 6 6 158 158 1.1 1.1 134 134 141 141 2.5 2.5 9 9 12 17 18 12 17 18 20009 20009 6F120 1N1199A 1200 50 6 12 158 150 1.1 1.35 134 230 141 240 2.5 2 9 9 12 17 18 12 17 20009 20084 12F10 1N1200A 100 100 12 12 144 150 1.26 1.35 225 230 235 240 2 2 9 9 12 17 18 12 17 20009 20084 1N1201A 1N1202A 150 200 12 12 150 150 1.35 1.35 230 230 240 240 2 2 9 9 12 17 12 17 20084 20084 12F20 1N1203A 200 300 12 12 144 150 1.26 1.35 225 230 235 240 2 2 9 9 12 17 18 12 17 20009 20084 12F40 400 12 144 1.26 225 235 2 9 12 17 18 20009 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AA (DO-4) Standard Recovery 1N1204A 400 12 150 1.35 230 240 2 9 12 17 20084 1N1205A 1N1206A 500 600 12 12 150 150 1.35 1.35 230 230 240 240 2 2 9 9 12 17 12 17 20084 20084 12F60 1N3670A 600 700 12 12 144 150 1.26 1.35 225 230 235 240 2 2 9 9 12 17 18 12 17 20009 20084 12F80 1N3671A 800 800 12 12 144 150 1.26 1.35 225 230 235 240 2 2 9 9 12 17 18 12 17 20009 20084 1N3672A 12F100 900 1000 12 12 150 144 1.35 1.26 230 225 240 235 2 2 9 9 12 17 12 17 18 20084 20009 1N3673A 12F120 1000 1200 12 12 150 144 1.35 1.26 230 225 240 235 2 2 9 9 12 17 12 17 18 20084 20009 16F10 16F20 100 200 16 16 140 140 1.23 1.23 295 295 310 310 1.6 1.6 9 9 12 17 18 12 17 18 20009 20009 16F40 16F60 400 600 16 16 140 140 1.23 1.23 295 295 310 310 1.6 1.6 9 9 12 17 18 12 17 18 20009 20009 16F80 16F100 800 1000 16 16 140 140 1.23 1.23 295 295 310 310 1.6 1.6 9 9 12 17 18 12 17 18 20009 20009 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number Standard Recovery 16F120 (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AA (DO-4) 1200 16 140 1.23 295 310 1.6 9 12 17 18 20009 25F10 25F20 100 200 25 25 120 120 0.9 0.9 300 300 314 314 1.5 1.5 9 9 12 17 18 12 17 18 80018 80018 25F40 25F60 400 600 25 25 120 120 0.9 0.9 300 300 314 314 1.5 1.5 9 9 12 17 18 12 17 18 80018 80018 25F80 25F100 800 1000 25 25 120 120 0.9 0.9 300 300 314 314 1.5 1.5 9 9 12 17 18 12 17 18 80018 80018 25F120 1200 25 120 0.9 300 314 1.5 9 12 17 18 80018 DO-203AB (DO-5) 1N3208 1N3209 50 100 15 15 150 150 1.5 1.5 239 239 250 250 0.65 0.65 12 17 12 17 20010 20010 1N3210 1N3211 200 300 15 15 150 150 1.5 1.5 239 239 250 250 0.65 0.65 12 17 12 17 20010 20010 1N3212 1N3213 400 500 15 15 150 150 1.5 1.5 239 239 250 250 0.65 0.65 12 17 12 17 20010 20010 1N3214 600 15 150 1.5 239 250 0.65 12 17 20010 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AB (DO-5) Standard Recovery 1N1183 50 35 140 1.7 480 500 1 9 12 17 20087 1N1184 1N1185 100 150 35 35 140 140 1.7 1.7 480 480 500 500 1 1 9 9 12 17 12 17 20087 20087 1N1186 1N1187 200 300 35 35 140 140 1.7 1.7 480 480 500 500 1 1 9 9 12 17 12 17 20087 20087 1N1188 1N1189 400 500 35 35 140 140 1.7 1.7 480 480 500 500 1 1 9 9 12 17 12 17 20087 20087 1N1190 1N3765 600 700 35 35 140 140 1.7 1.8 480 380 500 400 1 1 9 9 12 17 12 17 20087 20087 1N3766 1N3767 800 900 35 35 140 140 1.8 1.8 380 380 400 400 1 1 9 9 12 17 12 17 20087 20087 1N3768 1N1183A 1000 50 35 40 140 150 1.8 1.3 380 765 400 800 1 1.1 9 9 12 17 12 17 20087 20087 1N1184A 40HF10 100 100 40 40 150 140 1.3 1.3 765 480 800 500 1.1 1 9 9 12 17 12 17 18 20087 20014 1N1185A 1N1186A 150 200 40 40 150 150 1.3 1.3 765 765 800 800 1.1 1.1 9 9 12 17 12 17 20087 20087 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AB (DO-5) Standard Recovery 40HF20 200 40 140 1.3 480 500 1 9 12 17 18 20014 1N1187A 1N1188A 300 400 40 40 150 150 1.3 1.3 765 765 800 800 1.1 1.1 9 9 12 17 12 17 20087 20087 40HF40 1N1189A 400 500 40 40 140 150 1.3 1.3 480 765 500 800 1 1.1 9 9 12 17 18 12 17 20014 20087 40HF60 1N1190A 600 600 40 40 140 150 1.3 1.3 480 765 500 800 1 1.1 9 9 12 17 18 12 17 20014 20087 40HF80 40HF100 800 1000 40 40 140 140 1.3 1.3 480 480 500 500 1 1 9 9 12 17 18 12 17 18 20014 20014 40HF120 40HF140 1200 1400 40 40 140 110 1.3 1.3 480 480 500 500 1 1 9 9 12 17 18 12 17 18 20014 20014 40HF160 1N2128A 1600 50 40 60 110 140 1.3 1.3 480 860 500 900 1 0.65 9 9 12 17 18 12 17 20014 20087 1N2129A 1N2130A 100 150 60 60 140 140 1.3 1.3 860 860 900 900 0.65 0.65 9 9 12 17 12 17 20087 20087 1N2131A 1N2133A 200 300 60 60 140 140 1.3 1.3 860 860 900 900 0.65 0.65 9 9 12 17 12 17 20087 20087 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AB (DO-5) Standard Recovery 1N2135A 400 60 140 1.3 860 900 0.65 9 12 17 20087 1N2137A 1N2138A 500 600 60 60 140 140 1.3 1.3 860 860 900 900 0.65 0.65 9 9 12 17 12 17 20087 20087 70HF10 70HF20 100 200 70 70 140 140 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HF40 70HF60 400 600 70 70 140 140 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HF80 70HF100 800 1000 70 70 140 140 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HF120 70HF140 1200 1400 70 70 140 110 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HF160 88HF10 1600 100 70 85 110 140 1.35 1.2 1000 1450 1050 1500 0.45 0.35 9 9 12 17 18 12 17 20014 20014 85HF10 85HF20 100 200 85 85 140 140 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 18 12 17 18 20014 20014 88HF20 88HF40 200 400 85 85 140 140 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 12 17 20014 20014 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AB (DO-5) Standard Recovery 85HF40 400 85 140 1.2 1450 1500 0.35 9 12 17 18 20014 85HF60 88HF60 600 600 85 85 140 140 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 18 12 17 20014 20014 85HF80 88HF80 800 800 85 85 140 140 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 18 12 17 20014 20014 85HF100 88HF100 1000 1000 85 85 140 140 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 18 12 17 20014 20014 85HF120 88HF120 1200 1200 85 85 140 140 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 18 12 17 20014 20014 85HF140 85HF160 1400 1600 85 85 110 110 1.2 1.2 1450 1450 1500 1500 0.35 0.35 9 9 12 17 18 12 17 18 20014 20014 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Diodes V RRM Part Number (V) I @T F(AV) HS (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R J-HS C/W Notes Fax-on-Demand DO-200AA (A-Puk) Standard Recovery DO-200AA (A-Puk) SD300C25C SD300C28C 2500 2800 540 540 55 55 2.08 2.08 1500 1500 5090 5090 5330 5330 0.073 0.073 5 5 12 23 12 23 82083 82083 SD300C32C SD300C04C 3200 400 540 650 55 55 2.08 2.08 1500 1500 5090 5090 5330 5330 0.073 0.073 5 5 12 23 12 23 82083 82083 SD300C08C SD300C12C 800 1200 650 650 55 55 2.08 2.08 1500 1500 5090 5090 5330 5330 0.073 0.073 5 5 12 23 12 23 82083 82083 SD300C16C SD300C20C 1600 2000 650 650 55 55 2.08 2.08 1500 1500 5090 5090 5330 5330 0.073 0.073 5 5 12 23 12 23 82083 82083 SD700C30L SD700C36L 3000 3600 700 700 55 55 1.66 1.66 1000 1000 6310 6310 6600 6600 0.05 0.05 5 5 12 23 25 12 23 25 82096 82096 SD700C40L SD700C45L 4000 4500 700 700 55 55 1.66 1.66 1000 1000 6310 6310 6600 6600 0.05 0.05 5 5 12 23 25 12 23 25 82096 82096 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number Standard Recovery SD400C04C (V) I @T F(AV) C (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) R JHS (A) C/W Notes Fax-on-Demand DO-200AA (A-Puk) 400 800 55 1.86 1930 6940 7265 0.073 5 12 23 82084 SD400C08C SD400C12C 800 1200 800 800 55 55 1.86 1.86 1930 1930 6940 6940 7265 7265 0.073 0.073 5 5 12 23 12 23 82084 82084 SD400C16C SD400C20C 1600 2000 800 800 55 55 1.86 1.86 1930 1930 6940 6940 7265 7265 0.073 0.073 5 5 12 23 12 23 82084 82084 SD400C24C SD1100C25L 2400 2500 800 910 55 55 1.86 1.44 1930 1500 6940 8830 7265 9250 0.073 0.05 5 5 12 23 12 23 82084 82073 SD1100C30L SD1100C32L 3000 3200 910 910 55 55 1.44 1.44 1500 1500 8830 8830 9250 9250 0.05 0.05 5 5 12 23 12 23 82073 82073 SD800C40L SD800C45L 4000 4500 1065 55 1065 55 1.95 1.95 2000 2000 10250 10750 10250 10750 0.031 0.031 3 3 4 4 82085 82085 SD1100C25C SD1100C30C 2500 3000 1100 55 1100 55 1.44 1.44 1500 1500 8830 8830 9250 9250 0.038 0.038 5 5 12 23 12 23 82072 82072 SD1100C32C 3200 1100 55 1.44 1500 8830 9250 0.038 5 12 23 82072 5 5 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number Standard Recovery SD1100C04L (V) I @T F(AV) HS (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) R J-HS (A) C/W Notes Fax-on-Demand DO-200AB (B-Puk) 400 1170 55 1.31 1500 10930 11450 0.05 5 12 23 82073 SD1100C08L SD1100C12L 800 1200 1170 55 1170 55 1.31 1.31 1500 1500 10930 11450 10930 11450 0.05 0.05 5 5 12 23 12 23 82073 82073 SD1100C16L SD1100C20L 1600 2000 1170 55 1170 55 1.31 1.31 1500 1500 10930 11450 10930 11450 0.05 0.05 5 5 12 23 12 23 82073 82073 SD800C24L SD800C30L 2400 3000 1180 55 1180 55 1.66 1.66 2000 2000 11440 11980 11440 11980 0.031 0.031 3 3 4 4 82085 82085 SD800C36L SD1100C04C 3600 400 1180 55 1400 55 1.66 1.31 2000 1500 11440 11980 10930 11450 0.031 0.038 3 5 4 5 12 23 82085 82072 SD1100C08C SD1100C12C 800 1200 1400 55 1400 55 1.31 1.31 1500 1500 10930 11450 10930 11450 0.038 0.038 5 5 12 23 12 23 82072 82072 SD1100C16C SD1100C20C 1600 2000 1400 55 1400 55 1.31 1.31 1500 1500 10930 11450 10930 11450 0.038 0.038 5 5 12 23 12 23 82072 82072 SD1500C04L 400 1600 55 1.64 3000 14000 14700 0.031 5 12 23 82086 5 5 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number Standard Recovery SD1500C08L (V) I @T F(AV) HS (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) R J-HS (A) C/W Notes Fax-on-Demand DO-200AB (B-Puk) 800 1600 55 1.64 3000 14000 14700 0.031 5 12 23 82086 SD1500C12L SD1500C16L 1200 1600 1600 55 1600 55 1.64 1.64 3000 3000 14000 14700 14000 14700 0.031 0.031 5 5 12 23 12 23 82086 82086 SD1500C20L SD1500C25L 2000 2500 1600 55 1600 55 1.64 1.64 3000 3000 14000 14700 14000 14700 0.031 0.031 5 5 12 23 12 23 82086 82086 SD1500C30L SD1700C40K 3000 4000 1600 55 1875 55 1.64 2.11 3000 4000 14000 14700 16800 17600 0.031 0.02 5 5 12 23 12 23 25 82086 82087 SD1700C45K SD1700C24K 4500 2400 1875 55 2080 55 2.11 1.81 4000 4000 16800 17600 20200 21150 0.02 0.02 5 5 12 23 25 12 23 25 82087 82087 SD1700C30K SD1700C36K 3000 3600 2080 55 2080 55 1.81 1.81 4000 4000 20200 21150 20200 21150 0.02 0.02 5 5 12 23 25 12 23 25 82087 82087 SD2000C04L SD2000C08L 400 800 2100 55 2100 55 1.55 1.55 6000 6000 20100 21000 20100 21000 0.031 0.031 5 5 12 23 12 23 82088 82088 SD2000C10L 1000 2100 55 1.55 6000 20100 21000 0.031 5 12 23 82088 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) HS (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) R J-HS (A) C/W Notes Fax-on-Demand DO-200AC (K-Puk) Standard Recovery SD2500C12K 1200 3000 55 1.41 4000 26050 27300 0.02 5 12 23 82089 SD2500C16K SD2500C20K 1600 2000 3000 55 3000 55 1.41 1.41 4000 4000 26050 27300 26050 27300 0.02 0.02 5 5 12 23 12 23 82089 82089 SD2500C25K SD3000C04K 2500 400 3000 55 3800 55 1.41 1.22 4000 6000 26050 27300 30100 31500 0.02 0.02 5 5 12 23 12 23 82089 82090 SD3000C08K SD3000C10K 800 1000 3800 55 3800 55 1.22 1.22 6000 6000 30100 31500 30100 31500 0.02 0.02 5 5 12 23 12 23 82090 82090 SD4000C30R SD4000C34R 3000 3400 4450 55 4450 55 1.44 1.44 6000 6000 48200 50470 48200 50470 0.01 0.01 5 5 12 23 12 23 82033 82033 SD4000C38R SD4000C40R 3800 4000 4450 55 4450 55 1.44 1.44 6000 6000 48200 50470 48200 50470 0.01 0.01 5 5 12 23 12 23 82033 82033 SD5000C20R SD5000C24R 2000 2400 5570 55 5570 55 1.32 1.32 8000 8000 57000 59700 57000 59700 0.01 0.01 5 5 12 23 12 23 82034 82034 SD5000C26R 2600 5570 55 1.32 8000 57000 59700 0.01 5 12 23 82034 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) HS (A) (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) R J-HS (A) C/W Notes Fax-on-Demand B-44 (R-Puk) Standard Recovery SD5000C30R 3000 5570 55 1.32 8000 57000 59700 0.01 5 12 23 82034 SD6000C12R SD6000C16R 1200 1600 6690 55 6690 55 1.22 1.22 9000 9000 64250 67280 64250 67280 0.01 0.01 5 5 12 23 12 23 82035 82035 SD6000C20R SD6000C25R 2000 2500 6690 55 6690 55 1.22 1.22 9000 9000 64250 67280 64250 67280 0.01 0.01 5 5 12 23 12 23 82035 82035 SD8500C04R SD8500C06R 400 600 9570 55 9570 55 0.97 0.97 10000 80300 84100 10000 80300 84100 0.01 0.01 5 5 12 23 12 23 82035 82035 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AA (DO-4) Avalanche DO-203AA (DO-4) A6F40 A6F60 400 600 6 6 158 158 1.1 1.1 134 134 141 141 2.5 2.5 9 9 12 17 18 12 17 18 20009 20009 A6F80 A6F100 800 1000 6 6 158 158 1.1 1.1 134 134 141 141 2.5 2.5 9 9 12 17 18 12 17 18 20009 20009 A6F120 A12F40 1200 400 6 12 158 144 1.1 1.26 134 225 141 235 2.5 2 9 9 12 17 18 12 17 18 20009 20009 A12F60 A12F80 600 800 12 12 144 144 1.26 1.26 225 225 235 235 2 2 9 9 12 17 18 12 17 18 20009 20009 A12F100 A12F120 1000 1200 12 12 144 144 1.26 1.26 225 225 235 235 2 2 9 9 12 17 18 12 17 18 20009 20009 A16F40 A16F60 400 600 16 16 140 140 1.23 1.23 295 295 310 310 1.6 1.6 9 9 12 17 18 12 17 18 20009 20009 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number Avalanche A16F80 (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AA (DO-4) 800 16 140 1.23 295 310 1.6 9 12 17 18 20009 A16F100 A16F120 1000 1200 16 16 140 140 1.23 1.23 295 295 310 310 1.6 1.6 9 9 12 17 18 12 17 18 20009 20009 A25F40 A25F60 400 600 25 25 120 120 0.9 0.9 300 300 314 314 1.5 1.5 12 17 12 17 82018 82018 A25F80 A25F100 800 1000 25 25 120 120 0.9 0.9 300 300 314 314 1.5 1.5 12 17 12 17 82018 82018 A25F120 40HA40 1200 400 25 40 120 140 0.9 1.3 300 480 314 500 1.5 1 12 17 9 12 17 18 82018 20014 40HA60 40HA80 600 800 40 40 140 140 1.3 1.3 480 480 500 500 1 1 9 9 12 17 18 12 17 18 20014 20014 40HA100 40HA120 1000 1200 40 40 140 110 1.3 1.3 480 480 500 500 1 1 9 9 12 17 18 12 17 18 20014 20014 40HA140 1400 40 110 1.3 480 500 1 9 12 17 18 20014 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number Avalanche 40HA160 (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC(DC) C/W Notes Fax-on-Demand DO-203AB (DO-5) 1600 40 110 1.3 480 500 1 9 12 17 18 20014 70HA40 70HA60 400 600 70 70 140 140 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HA80 70HA100 800 1000 70 70 140 140 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HA120 70HA140 1200 1400 70 70 110 110 1.35 1.35 1000 1000 1050 1050 0.45 0.45 9 9 12 17 18 12 17 18 20014 20014 70HA160 1600 70 110 1.35 1000 1050 0.45 9 12 17 18 20014 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand T-MODULE Power Module Diode T40HF10 T40HF20 T40HF40 T40HF60 T40HF80 T40HF100 T40HF120 T40HF140 T40HF160 T70HF10 T70HF20 T70HF40 100 200 400 600 40 40 40 40 85 85 85 85 1.3 1.3 1.3 1.3 480 480 480 480 500 500 500 500 1.36 1.36 1.36 1.36 800 1000 1200 1400 1600 100 200 400 40 40 40 40 40 70 70 70 85 85 85 85 85 85 85 85 1.3 1.3 1.3 1.3 1.3 1.35 1.35 1.35 480 480 480 480 480 1000 1000 1000 500 500 500 500 500 1050 1050 1050 1.36 1.36 1.36 1.36 1.36 0.69 0.69 0.69 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27 27 27 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand T-MODULE Power Module Diode T70HF60 T70HF80 T70HF100 T70HF120 T70HF140 T70HF160 T85HF10 T85HF20 T85HF40 T85HF60 T85HF80 T85HF100 600 800 1000 1200 70 70 70 70 85 85 85 85 1.35 1.35 1.35 1.35 1000 1000 1000 1000 1050 1050 1050 1050 0.69 0.69 0.69 0.69 1400 1600 100 200 400 600 800 1000 70 70 85 85 85 85 85 85 85 85 85 85 85 85 85 85 1.35 1.35 1.27 1.27 1.27 1.27 1.27 1.27 1000 1000 1450 1450 1450 1450 1450 1450 1050 1050 1500 1500 1500 1500 1500 1500 0.69 0.69 0.62 0.62 0.62 0.62 0.62 0.62 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27 27 27 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand T-MODULE Power Module Diode T85HF120 T85HF140 T85HF160 T110HF10 T110HF20 T110HF40 T110HF60 T110HF80 T110HF100 T110HF120 T110HF140 T110HF160 1200 1400 1600 100 85 85 85 110 85 85 85 85 1.27 1.27 1.27 1.35 1450 1450 1450 1700 1500 1500 1500 1780 0.62 0.62 0.62 0.47 200 400 600 800 1000 1200 1400 1600 110 110 110 110 110 110 110 110 85 85 85 85 85 85 85 85 1.35 1.35 1.35 1.35 1.35 1.35 1.35 1.35 1700 1700 1700 1700 1700 1700 1700 1700 1780 1780 1780 1780 1780 1780 1780 1780 0.47 0.47 0.47 0.47 0.47 0.47 0.47 0.47 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27 27 27 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 20094 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand Add-A-Pak Power Module Diode IRKE56/04 IRKE56/06 IRKE56/08 IRKE56/10 IRKE56/12 IRKE56/14 IRKE56/16 IRKE71/04 IRKE71/06 IRKE71/08 IRKE71/10 IRKE71/12 400 600 800 1000 60 60 60 60 100 100 100 100 1.51 1.51 1.51 1.51 1350 1350 1350 1350 1420 1420 1420 1420 0.5 0.5 0.5 0.5 1200 1400 1600 400 600 800 1000 1200 60 60 60 80 80 80 80 80 100 100 100 100 100 100 100 100 1.51 1.51 1.51 1.5 1.5 1.5 1.5 1.5 1350 1350 1350 1500 1500 1500 1500 1500 1420 1420 1420 1570 1570 1570 1570 1570 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.4 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27 27 27 27140 27140 27140 27140 27140 27140 27140 27140 27140 27140 27140 27140 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand Add-A-Pak Power Module Diode IRKE71/14 IRKE71/16 IRKE91/04 IRKE91/06 IRKE91/08 IRKE91/10 IRKE91/12 IRKE91/14 IRKE91/16 1400 1600 400 600 80 80 100 100 100 100 100 100 1.5 1.5 1.45 1.45 1500 1500 1700 1700 1570 1570 1780 1780 0.4 0.4 0.35 0.35 800 1000 1200 1400 1600 100 100 100 100 100 100 100 100 100 100 1.45 1.45 1.45 1.45 1.45 1700 1700 1700 1700 1700 1780 1780 1780 1780 1780 0.35 0.35 0.35 0.35 0.35 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27140 27140 27141 27141 27141 27141 27141 27141 27141 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand INT-A-Pak Power Module Diode IRKE166-04 IRKE166-08 IRKE166-12 IRKE166-16 IRKE166-20 IRKE196-04 IRKE196-08 IRKE196-12 IRKE196-16 IRKE196-20 IRKE236-04 IRKE236-08 400 800 1200 1600 165 165 165 165 100 100 100 100 1.69 1.69 1.69 1.69 3350 3350 3350 3350 3500 3500 3500 3500 0.2 0.2 0.2 0.2 2000 400 800 1200 1600 2000 400 800 165 195 195 195 195 195 230 230 100 100 100 100 100 100 100 100 1.69 1.38 1.38 1.38 1.38 1.38 1.27 1.27 3350 4000 4000 4000 4000 4000 5500 5500 3500 4200 4200 4200 4200 4200 5700 5700 0.2 0.2 0.2 0.2 0.2 0.2 0.17 0.17 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 28 28 28 28 28 28 28 28 28 28 28 28 29 29 29 29 29 29 29 29 29 29 29 29 87096 87096 87096 87096 87096 87096 87096 87096 87096 87096 87096 87096 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand INT-A-Pak Power Module Diode IRKE236-12 IRKE236-16 IRKE236-20 IRKE236-24 1200 1600 2000 2400 230 230 230 230 100 100 100 100 1.27 1.27 1.27 1.27 5500 5500 5500 5500 5700 5700 5700 5700 0.17 0.17 0.17 0.17 2 2 2 2 8 8 8 8 9 9 9 9 28 28 28 28 29 29 29 29 87096 87096 87096 87096 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand MAGN-A-Pak Power Module Diode IRKE250-04 IRKE250-08 IRKE250-12 IRKE250-16 IRKE250-20 IRKE270-04 IRKE270-08 IRKE270-12 IRKE270-16 IRKE270-20 IRKE270-24 IRKE270-30 400 800 1200 1600 250 250 250 250 100 100 100 100 1.29 1.29 1.29 1.29 5900 5900 5900 5900 6180 6180 6180 6180 0.16 0.16 0.16 0.16 2000 400 800 1200 1600 2000 2400 3000 250 270 270 270 270 270 270 270 100 100 100 100 100 100 100 100 1.29 1.48 1.48 1.48 1.48 1.48 1.48 1.48 5900 7500 7500 7500 7500 7500 7500 7500 6180 7850 7850 7850 7850 7850 7850 7850 0.16 0.125 0.125 0.125 0.125 0.125 0.125 0.125 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 29 29 29 29 29 29 29 29 29 29 29 29 87090 87090 87090 87090 87090 87090 87090 87090 87090 87090 87090 87090 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes V RRM Part Number (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand MAGN-A-Pak Power Module Diode IRKE320-16 400 800 1200 1600 320 320 320 320 100 100 100 100 1.28 1.28 1.28 1.28 8500 8500 8500 8500 8900 8900 8900 8900 0.125 0.125 0.125 0.125 IRKE320-20 2000 320 100 1.28 8500 8900 0.125 IRKE320-04 IRKE320-08 IRKE320-12 2 2 2 2 2 8 8 8 8 8 9 9 9 9 9 29 29 29 29 29 87090 87090 87090 87090 87090 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Center tap common Part Number cathode Center tap common anode V RRM (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand Add-A-Pak Power Module Diode / Diode IRKD56/04 IRKC56/04 IRKJ56/04 IRKD56/06 IRKC56/06 IRKJ56/06 IRKD56/08 IRKC56/08 IRKJ56/08 IRKD56/10 IRKC56/10 IRKJ56/10 IRKD56/12 IRKC56/12 IRKJ56/12 IRKD56/14 IRKC56/14 IRKJ56/14 IRKD56/16 IRKC56/16 IRKJ56/16 IRKD71/04 IRKC71/04 IRKJ71/04 IRKD71/06 IRKC71/06 IRKJ71/06 IRKD71/08 IRKC71/08 IRKJ71/08 IRKD71/10 IRKC71/10 IRKJ71/10 IRKD71/12 IRKC71/12 IRKJ71/12 400 600 800 1000 60 60 60 60 100 100 100 100 1.51 1.51 1.51 1.51 1350 1350 1350 1350 1420 1420 1420 1420 0.25 0.25 0.25 0.25 1200 1400 1600 400 600 800 1000 1200 60 60 60 80 80 80 80 80 100 100 100 100 100 100 100 100 1.51 1.51 1.51 1.5 1.5 1.5 1.5 1.5 1350 1350 1350 1500 1500 1500 1500 1500 1420 1420 1420 1570 1570 1570 1570 1570 0.25 0.25 0.25 0.2 0.2 0.2 0.2 0.2 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27 27 27 27140 27140 27140 27140 27140 27140 27140 27140 27140 27140 27140 27140 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Center tap common Part Number cathode Center tap common anode V RRM (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand Add-A-Pak Power Module Diode / Diode IRKD71/14 IRKC71/14 IRKJ71/14 IRKD71/16 IRKC71/16 IRKJ71/16 IRKD91/04 IRKC91/04 IRKJ91/04 IRKD91/06 IRKC91/06 IRKJ91/06 IRKD91/08 IRKC91/08 IRKJ91/08 IRKD91/10 IRKC91/10 IRKJ91/10 IRKD91/12 IRKC91/12 IRKJ91/12 IRKD91/14 IRKC91/14 IRKJ91/14 IRKD91/16 IRKC91/16 IRKJ91/16 1400 1600 400 600 80 80 100 100 100 100 100 100 1.5 1.5 1.45 1.45 1500 1500 1700 1700 1570 1570 1780 1780 0.2 0.2 0.175 0.175 800 1000 1200 1400 1600 100 100 100 100 100 100 100 100 100 100 1.45 1.45 1.45 1.45 1.45 1700 1700 1700 1700 1700 1780 1780 1780 1780 1780 0.175 0.175 0.175 0.175 0.175 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 27 27 27 27 27 27 27 27 27 27140 27140 27141 27141 27141 27141 27141 27141 27141 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Center tap common Part Number cathode Center tap common anode V RRM (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand INT-A-Pak Power Module Diode / Diode IRKD166-04 IRKC166-04 IRKJ166-04 IRKD166-08 IRKC166-08 IRKJ166-08 IRKD166-12 IRKC166-12 IRKJ166-12 IRKD166-16 IRKC166-16 IRKJ166-16 IRKD166-20 IRKC166-20 IRKJ166-20 IRKD196-04 IRKC196-04 IRKJ196-04 IRKD196-08 IRKC196-08 IRKJ196-08 IRKD196-12 IRKC196-12 IRKJ196-12 IRKD196-16 IRKC196-16 IRKJ196-16 IRKD196-20 IRKC196-20 IRKJ196-20 IRKD196-24 IRKC196-24 IRKJ196-24 IRKD236-04 IRKC236-04 IRKJ236-04 400 800 1200 1600 165 165 165 165 100 100 100 100 1.69 1.69 1.69 1.69 3350 3350 3350 3350 3500 3500 3500 3500 0.1 0.1 0.1 0.1 2000 400 800 1200 1600 2000 2400 400 165 195 195 195 195 195 195 230 100 100 100 100 100 100 100 100 1.69 1.38 1.38 1.38 1.38 1.38 1.38 1.27 3350 4000 4000 4000 4000 4000 4000 5500 3500 4200 4200 4200 4200 4200 4200 5700 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.085 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 28 28 28 28 28 28 28 28 28 28 28 28 29 29 29 29 29 29 29 29 29 29 29 29 87096 87096 87096 87096 87096 87096 87096 87096 87096 87096 87096 87096 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Center tap common Part Number cathode Center tap common anode V RRM (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand INT-A-Pak Power Module Diode / Diode IRKD236-08 IRKC236-08 IRKJ236-08 IRKD236-12 IRKC236-12 IRKJ236-12 IRKD236-16 IRKC236-16 IRKJ236-16 IRKD236-20 IRKC236-20 IRKJ236-20 IRKD236-22 IRKC236-22 IRKJ236-22 IRKD236-24 IRKC236-24 IRKJ236-24 800 1200 1600 2000 230 230 230 230 100 100 100 100 1.27 1.27 1.27 1.27 5500 5500 5500 5500 5700 5700 5700 5700 0.085 0.085 0.085 0.085 2200 2400 230 100 230 100 1.27 1.27 5500 5500 5700 5700 0.085 0.085 2 2 2 2 2 2 8 8 8 8 8 8 9 9 9 9 9 9 28 28 28 28 28 28 29 29 29 29 29 29 87096 87096 87096 87096 87096 87096 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Center tap common Part Number cathode Center tap common anode V RRM (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand MAGN-A-Pak Power Module Diode / Diode IRKD250-04 IRKC250-04 IRKJ250-04 IRKD250-08 IRKC250-08 IRKJ250-08 IRKD250-12 IRKC250-12 IRKJ250-12 IRKD250-16 IRKC250-16 IRKJ250-16 IRKD250-20 IRKC250-20 IRKJ250-20 IRKD270-04 IRKC270-04 IRKJ270-04 IRKD270-08 IRKC270-08 IRKJ270-08 IRKD270-12 IRKC270-12 IRKJ270-12 IRKD270-16 IRKC270-16 IRKJ270-16 IRKD270-20 IRKC270-20 IRKJ270-20 IRKD270-24 IRKC270-24 IRKJ270-24 IRKD270-30 IRKC270-30 IRKJ270-30 400 800 1200 1600 250 250 250 250 100 100 100 100 1.29 1.29 1.29 1.29 5900 5900 5900 5900 6180 6180 6180 6180 0.08 0.08 0.08 0.08 2000 400 800 1200 1600 2000 2400 3000 250 270 270 270 270 270 270 270 100 100 100 100 100 100 100 100 1.29 1.48 1.48 1.48 1.48 1.48 1.48 1.48 5900 7500 7500 7500 7500 7500 7500 7500 6180 7850 7850 7850 7850 7850 7850 7850 0.08 0.063 0.063 0.063 0.063 0.063 0.063 0.063 2 2 2 2 2 2 2 2 2 2 2 2 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 29 29 29 29 29 29 29 29 29 29 29 29 87090 87090 87090 87090 87090 87090 87090 87090 87090 87090 87090 87090 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Center tap common Part Number cathode Center tap common anode V RRM (V) I @T F(AV) C (A) (C) @ FM I F(AV) (V) V I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand MAGN-A-Pak Power Module Diode / Diode IRKC320-16 IRKJ320-16 400 800 1200 1600 320 320 320 320 100 100 100 100 1.28 1.28 1.28 1.28 8500 8500 8500 8500 8900 8900 8900 8900 0.063 0.063 0.063 0.063 IRKC320-20 IRKJ320-20 2000 320 100 1.28 8500 8900 0.063 IRKD320-04 IRKC320-04 IRKJ320-04 IRKD320-08 IRKC320-08 IRKJ320-08 IRKD320-12 IRKC320-12 IRKJ320-12 IRKD320-16 IRKD320-20 2 2 2 2 2 8 8 8 8 8 9 9 9 9 9 29 29 29 29 29 87090 87090 87090 87090 87090 NOTES: 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C www.irf.com 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening cone fo high-g applications. To order, chang part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side cooled 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 24 IF(AV) and Rth measured to heat sin 25 Ifsm measured at 50% VRRM reapplied 26 10 s square pulse, Tj=Tj max 27 RMS isolation voltage=3500V - 50Hz 28 Available with spacers and longer screws 29 RMS isolation voltage=3000V - 50Hz International Rectifier Diodes Part Number I V RRM (V F(AV) (A) I FSM 50 Hz 60 Hz V FM@ @T C (C) I FM (V) (A) R (A) JC (DC) K/W Notes Power Module Super MAGN-A-Pak Diode / Diode IRKD600-08 800 600 100 1.25 16200 17200 0.032 2 8 9 29 IRKD600-12 1200 600 100 1.25 16200 17200 0.032 2 8 9 29 IRKD600-16 1600 600 100 1.25 16200 17200 0.032 2 8 9 29 IRKD600-20 2000 600 100 1.25 16200 17200 0.032 2 8 9 29 1 Available on tape-and-reel 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 3 For Irm: Tj = 150C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 5 VFM measured at Tj=Tj max. 6 Io at ambient temperature 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 9 Vfm measured at Tj=25C 10 RMS isolation voltage=2700V - 50Hz 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 22 Available with strengthening c high-g applications. To order, part number from 301 to 305.3 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC 23 DC operation, double side coo 24 IF(AV) and Rth measured to he 19 Available with stud top case or flag terminal. To order, add 2 for stud top case or 4 for flag terminal to second digit of part number, e.g. 152L5A. 26 10 s square pulse, Tj=Tj max 20 1N3288 series also available. 21 VFM for JEDEC types is registered at max Tj. 25 Ifsm measured at 50% VRRM reapplied 27 RMS isolation voltage=3500V 28 Available with spacers and lon screws 29 RMS isolation voltage=3000V