RC www.vishay.com Vishay Techno Thick Film Chip Resistors, Alternate Terminations FEATURES * Suitable for solderable, epoxy bondable, or wire bondable applications * Termination: Gold, palladium silver, platinum gold, platinum silver or platinum palladium gold available * Multiple styles, termination materials and configurations, allow wide design flexibility * Non-magnetic terminations * Flow solderable * Custom sizes available * Burn-in data available * Automatic placement capability * Available with either wraparound terminations or as a single termination flip chip * Tape and reel packaging available * Internationally standardized sizes * Compliant to RoHS Directive 2002/95/EC * Halogen-free according to IEC 61249-2-21 definition Note * Pb containing terminations are not RoHS compliant, exemptions may apply STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CASE SIZE MAXIMUM WORKING VOLTAGE (1) V 40 50 70 100 100 100 125 200 200 POWER RATING P70 C W RESISTANCE RANGE (2) TOLERANCE % RC0540 0504 0.100 10 to 500K RC0550 0505 0.100 10 to 500K 0.200 10 to 1M RC0575 0705 (4) RC5100 1005 0.250 10 to 1M RC1100 1010 0.450 10 to 1M RC1206 1206 0.300 10 to 1M RC5150 1505 0.325 10 to 1M RC7225 2208 0.525 10 to 1M RC2010 2010 0.575 10 to 1M Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Higher values available. Please consult factory. (3) 100 ppm/C standard thru 1 M, 200 ppm/C offered from 1.1 M to 10 M. (4) MIL case size 0705 and EIA case size 0805 are dimensionally the same. 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 1, 2, 5, 10, 20 TEMPERATURE COEFFICIENT (3) (- 55 C to + 150 C) ppm/C 100 100 100 100 100 100 100 100 100 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RC0540AA1K00FKSB (preferred part number format) R GLOBAL MODEL RC C SIZE 0540 0550 0575 5100 1100 1206 5150 7225 2010 0 5 TERM STYLE A = 3-sided B = Top only C = 5-sided 4 0 A A 1 K TERM MATERIAL RESISTANCE VALUE TOLERANCE A = Palladium silver B = Platinum gold C = Gold D = Platinum silver E = Platinum palladium gold R= K = k M = M 100R = 100 1K00 = 1 k 1M00 = 1 M F=1% G=2% J=5% K = 10 % M = 20 % Historical Part Numbering: CR1AA1001F100S2 (will continue to be accepted) CR 1 A A 1001 HISTORICAL TERM TERM RESISTANCE SIZE MODEL STYLE MATERIAL VALUE Revision: 23-Nov-11 0 0 TCR F K S B SOLDER TERMINATION PACKAGING K = 100 ppm D = Sn95/Ag5, HSD L = 150 ppm S= N = 200 ppm W = 350 ppm Sn62/Pb36/Ag2, HSD N = No solder F 100 TOLERANCE TCR B = Bulk F = T/R (full reel) 1 = T/R (1000 pcs) 5 = T/R (500 pcs) T = T/R (250 pcs min.) W = Waffle S2 SOLDER TERMINATION Document Number: 68013 1 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RC www.vishay.com Vishay Techno ENVIRONMENTAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Resistive element Operating Temperature: - 55 C to + 150 C Moisture Resistance: Less than 0.5 % change when tested per method 106 of MIL-STD-202 Life: Less than 1 % change when tested per method 108D (+ 85 C) of MIL-STD-202 Short Time Overload: Less than 0.5 % R Ruthenium oxide Encapsulation Glass Substrate 96 % alumina Termination Gold, palladium silver, platinum gold, platinum silver, platinum palladium gold terminations available. Solder finish Base metallization without a solder finish standard. Hot solder dipped tin/silver or tin/lead/silver solder alloys available. DIMENSIONS in inches (millimeters) Termination Style A Termination Style B (3-sided wraparound) (Top conductor only) Termination Style C (5-sided wraparound) W W W L L L T T T 0.025 [0.635] Max. 0.025 [0.635] Max. 0.025 [0.635] Max. MODEL LENGTH (L) (1) 0.006 (0.152) WIDTH (W) (1) THICKNESS (T) (1) 0.006 (0.152) 0.005 (0.127) RC0540 0.050 (1.27) 0.040 (1.02) 0.020 (0.508) RC0550 0.050 (1.27) 0.050 (1.27) 0.020 (0.508) RC0575 0.075 (1.90) 0.050 (1.27) 0.020 (0.508) RC5100 0.100 (2.54) 0.050 (1.27) 0.020 (0.508) RC1100 0.100 (2.54) 0.100 (2.54) 0.020 (0.508) RC1206 0.125 (3.18) 0.062 (1.57) 0.025 (0.635) RC5150 0.150 (3.81) 0.050 (1.27) 0.020 (0.508) RC7225 0.225 (5.72) 0.075 (1.90) 0.020 (0.508) RC2010 0.200 (5.08) 0.100 (2.54) 0.025 (0.635) Note (1) All dimensions are before solder coating. TYPE Wire bondable/ solderable Wire bondable/ Epoxy bondable TERMINATION MATERIAL Platinum palladium gold Gold Palladium silver Epoxy bondable (3) Platinum gold Platinum silver TERMINATION STYLE TERMINATION STYLE/ MATERIAL CODE 3-sided (wraparound) AE Top only (flip chip) BE 5-sided (wraparound) CE 3-sided (wraparound) AC Top only (flip chip) BC 5-sided (wraparound) CC 3-sided (wraparound) AA Top only (flip chip) BA 5-sided (wraparound) CA 3-sided (wraparound) AB Top only (flip chip) BB 5-sided (wraparound) CB 3-sided (wraparound) AD Top only (flip chip) BD 5-sided (wraparound) CD SOLDER TERMINATION CODE N (standard); D or S (optional) (2) N N Notes (2) Use solder termination N for applications requiring wire bondable mounting, and solder terminations D or S for applications requiring solderable mounting. (3) While not recommended, palladium silver terminations could be used for solderable applications when using a solder alloy containing silver. Revision: 23-Nov-11 Document Number: 68013 2 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000