P300 2.5-Inch NAND Flash SSD Features P300 2.5-Inch SATA NAND Flash SSD MTFDDACxxxSAL1x1 Features * * * * * * * * * * * * Reliability - MTBF: 2 million hours - 3-year warranty - Static and dynamic wear leveling - Field-upgradable firmware - Uncorrectable bit error rate (UBER): <1 sector per 1016 bits read - Low power consumption: <7W (AVG) * Endurance: Total bytes written (TBW) - 50GB ( 0.875PB); 100GB (1.75PB); 200GB (3.5PB) * Mechanical/electrical - Standard SATA connector - 5V power (10%) - Dimensions: 100.45mm x 69.85mm x 9.5mm - Weight: 100g * Operating temperature: 0C to 70C * Humidity (operating): 5% to 95% RH * Shock and vibration - 1500G/0.5ms - 5-500Hz at 3.1G * Capacity5: 50GB, 100GB, 200GB Micron(R) SLC NAND Flash RoHS-compliant package SATA 6 Gb/s interface ATA modes supported - PIO modes 3 and 4 - Multiword DMA modes 0, 1, 2 - Ultra DMA modes 0, 1, 2, 3, 4, 5, 6 Industry-standard, 512-byte sector size support Hot-plug capable Native command queueing support with 32 command slot support ATA8-ACS2 command set support Secure erase (data page) command set Self-monitoring, analysis, and reporting technology (SMART) command set Performance (empty/steady state)1, 2, 3, 4 - Sequential READ: up to 360/360 MB/s - Sequential WRITE: up to 275/255 MB/s - Random READ: up to 60,000/44,000 IOPs - Random WRITE: up to 45,200/16,000 IOPs - READ latency: 0.153/0.154ms (TYP) - WRITE latency: 0.118/0.424ms (TYP) Notes: 1. 128K transfers used for sequential READ/ WRITE values. 2. 4K transfers used for random READ/WRITE latency values. 3. I/O performance numbers as measured using Iometer with a queue depth of 32 and write cache disabled. 4. Performance values apply to all drive capacities. 5. 1GB = 1 billion bytes; formatted capacity is less. Warranty: Contact your Micron sales representative for further information regarding the product, including product warranties. PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 1 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. P300 2.5-Inch NAND Flash SSD Features Part Numbering Information The Micron(R) P300 SSD is available in different configurations and densities. Visit www.micron.com for a list of valid part numbers. Figure 1: Part Number Chart MT FD D AC xxx S AL - 1 N Micron Technology 1 xx ES Production Status Blank = Production ES = Engineering sample MS = Mechanical sample Product Family FD = Flash drive Operating Temperature Range Drive Interface Blank = 0C to 70C Drive Form Factor AA = Contact factory AB = Contact factory AC = Contact factory D = SATA 6.0 Gb/s Hardware Feature Set AC = 2.5-inch (9.5mm high) BOM Revision Drive Density 1 = 1st generation 050 = 50GB 100 = 100GB 200 = 200GB NAND Flash Component N = M62B, 16Gb, SLC, x8 Sector Size 1 = 512-byte NAND Flash Type Product Family AL = P300 S = SLC PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 2 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD General Description General Description The Micron(R) P300 solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an industry standard 2.5-inch drive enclosure, the SSD integrates easily in existing storage infrastructures. The Micron(R) P300 SSD is targeted at applications that require a high percentage of random READ/WRITE operations; high performance in terms of IOPs or latency, high endurance, high data retention; or applications that are deployed in harsh environments. Figure 2: Functional Block Diagram NAND SATA SSD controller NAND NAND NAND NAND DRAM buffer PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 3 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Architecture Architecture The P300 SSD is a NAND Flash storage device. A SATA 6 Gb/s interface connects to the SSD externally and communicates with the controller. The controller manages data transfers to and from the NAND Flash array. Table 1: P300 Configurations Unformatted Disk Density NAND Flash Process NAND Flash Density Package Count Die per BGA Package 50GB 34nm 16Gb 16 2 100GB 34nm 16Gb 16 4 200GB 34nm 16Gb 16 8 1. Density is shown as user capacity (unformatted). Note: Logical Block Address Configuration The drive is set to report the number of logical block addresses (LBA) that will ensure sufficient storage space for the specified density. Standard LBA settings, based on the IDEMA standard (LBA1-02), are shown below. Table 2: Standard LBA Settings Total LBAs Drive Size1 Decimal Hexadecimal 50GB 97,696,368 100GB 195,371,568 200GB 390,721,968 Note: Max LBA User Available Bytes Decimal Hexadecimal (Unformatted) 5D2BA70 97,696,367 5D2BA6F 50,020,549,632 BA52230 195,371,567 BA5222F 100,030,242,816 1749F1B0 390,721,967 1749F1AF 200,049,647,616 1. 1GB = 1,000,000,000 bytes. Table 3: 2.5-Inch Nominal Dimensions and Weight Value Unit Height 9.5 mm Width 69.85 mm Length 100.50 mm <100 g Unit weight PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 4 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Architecture Interface Connectors The SATA signal segment interface cable has four conductors and three ground connections. As shown in Package Dimensions, the cable includes a 7-pin signal segment and a 9-pin power segment arranged in a single row with a 1.27mm (0.050in) pitch. Table 4: SATA Signal Segment Pin Assignments Signal Name Type Description S1 GND Ground S2 A S3 A# S4 GND S5 B# S6 B S7 GND Differential signal pair A and A# Ground Differential signal pair B and B# Ground Table 5: 2.5-Inch SATA Power Segment Pin Assignments Pin# Signal Name P1 V33 Description No connect P2 V33 No connect P3 V33 No connect P4 GND Ground P5 GND Grond P6 GND Ground P7 V5 5V power, precharge P8 V5 5V power P9 V5 5V power P10 GND Ground P11 DAS1 Device activity signal P12 GND Ground P13 V12 No connect P14 V12 No connect P15 V12 No connect Note: PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 1. Pin 11 (DAS) may be optionally connected to GND. 5 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Architecture Figure 3: SSD Interface Connections P1 S1 Power segment PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Signal segment 6 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Device ID Table 6: IDENTIFY Device ID * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 00 15 F 0b 14-8 X 1000100b 0 = ATA device Retired 7-6 F 01b Obsolete 5-3 X 000b Retired 2 V 0b Response incomplete 1 X 0b Retired 0b Reserved 01 X 3FFFh Obsolete 02 V C837h Specific configuration 03 X 0010h Obsolete 04 X 0000h 0000h 06 X 003Fh 0 07 0000h 0000h 09 X Retired Obsolete Reserved for the CompactFlash(R) Association (CFA) 0000h Retired Serial number (20 ASCII characters) 10 F Varies 20 X 0000h 0000h 0000h 23 F Varies Firmware revision (8 ASCII characters) 27 F Varies Model number (40 ASCII characters) 15-8 F 80h 80h 7-0 F 10h 00h = Reserved 01h-FFh = Maximum number of logical sectors that shall be transferred per DRQ data block on READ/WRITE MULTIPLE commands 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 47 48 13-1 0 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 0000000000000b F 0b Retired/Obsolete Reserved for the trusted computing group 1 = Trusted computing feature set is supported 7 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 49 15-14 13 F 12 1 = Standby timer values as specified in ATA-8 ACS-2 are supported 0 = Standby timer values shall be managed by the device 0b Reserved for IDENTIFY PACKET DEVICE command F 1b 1 = IORDY supported 0 = IORDY may be supported 10 F 1b 1 = IORDY may be disabled 9 F 1b 1 = Shall be set to 1 to indicate that LBA is supported 8 F 1b 1 = DMA support 7-2 X 00000000b Reserved 00b Current long physical sector alignment setting 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13-2 00000000b Reserved 1 X 0b Obsolete 0 F 1b Shall be set to 1 to indicate vendor-specific standby timer value minimum X 0000h 0000h F 00000000b 51 53 Reserved for IDENTIFY PACKET DEVICE command 1b 11 1-0 50 00b 15-8 7-3 00000b Obsolete Free-fall control sensitivity 00h = Vendor's recommended setting 01h-FFh = Sensitivity level; a larger number is a more sensitive setting Reserved 2 F 1b 1 = The fields reported in word 88 are valid 0 = The fields reported in word 88 are not valid 1 F 1b 1 = The fields reported in words (70:64) are valid 0 = The fields reported in words (70:64) are not valid 0 X 1b Obsolete X 3FFh 0010h 003Fh FC10h 00FBh Obsolete 54 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 8 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 59 15 F 1b 1 = The BLOCK ERASE EXT command is supported 14 F 0b 1 = The OVERWRITE EXT command is supported 13 F 0b 1 = The CRYPTO SCRAMBLE EXT command is supported 12 F 1b 1 = The sanitize feature set is supported 11-9 1b 7-0 V 00000001b Current setting for number of logical sectors that shall be transferred per DRQ data block on READ/WRITE MULTIPLE commands F Sect Total number of user addressable logical sectors for 28-bit commands 62 X 15-11 1 = Multiple sector setting is valid 0000h Obsolete 00000b Reserved 10 V 0b 1 = Multiword DMA mode 2 is selected 0 = Multiword DMA mode 2 is not selected 9 V 0b 1 = Multiword DMA mode 1 is selected 0 = Multiword DMA mode 1 is not selected 8 V 0b 1 = Multiword DMA mode 0 is selected 0 = Multiword DMA mode 0 is not selected 7-3 64 Reserved V 60 63 000b 8 0000b Reserved 2 F 1b 1 = Multiword DMA mode 2 and below is supported 1 F 1b 1 = Multiword DMA mode 1 and below is supported 0 F 1b 1 = Multiword DMA mode 0 is supported 00 Reserved 15-8 7-0 F 03h 65 F 0078h Minimum multiword DMA transfer cycle time per word in nanoseconds (cycle time) 66 F 0078h MFR's recommended multiword DMA transfer cycle time per word in nanoseconds (cycle time) 67 F 0078h Minimum PIO transfer cycle time without flow control in nanoseconds (cycle time) F 0078h Minimum PIO transfer cycle time with IORDY flow control in nanoseconds (cycle time) 68 15-0 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN PIO modes support 9 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 69 15 F 0b 1 = CFastTM specification support 14 F 0b 1 = Deterministic read after trim is supported 13 F 0b 1 = Long physical sector alignment error reporting control is supported 12 F 0b 1 = DEVICE CONFIGURATION IDENTIFY DMA and DEVICE CONFIGURATION SET DMA are supported 11 F 0b 1 = READ BUFFER DMA is supported 10 F 0b 1 = WRITE BUFFER DMA is supported 9 F 0b 1 = SET MAX PASSWORD DMA and SET MAX UNLOCK DMA are supported 8 F 0b 1 = DOWNLOAD MICROCODE DMA is supported 7 F 0b Reserved for IEEE-1667 6 F 0b 1 = Optional ATA device 28-bit commands supported 5 F 0b 1 = Read zero after trim is supported 4-0 00000b Reserved 70 0000h Reserved 71 0000h 0000h 0000h 0000h 75 15-5 4-0 76 00000000000b F 15-13 11111b 000b Reserved for the IDENTIFY PACKET DEVICE command Reserved Maximum queue depth - 1 Reserved for SATA 12 F 1b 1 = Supports NCQueue priority information 11 F 0b 1 - Supports unload while NCQ commands outstanding 10 F 1b 1 = Supports PHY event counters 9 F 1b 1 = Supports receipt of host-initiated partial interface power management 8 F 1b 1 = Supports NCQ feature set 7-3 0000b Reserved for SATA 2 F 1b 1 = Supports SATA Gen-2 signaling speed (3.0 Gb/s) 1 F 1b 1 = Supports SATA Gen-1 signaling speed (1.5 Gb/s) 0 F 0b Shall be cleared to 0 V 0004h 77 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Reserved for SATA 10 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 78 15-7 6 000000000b F 5 79 1 = Supports software settings preservation 0b Reserved for SATA 4 F 0b 1 = Supports in-order data delivery 3 F 1b 1 = Device supports initiating interface power management (DIPM) 2 F 1b 1 = Supports DMA setup auto activation 1 F 0b 1 = Supports nonzero buffer offsets 0 F 0b Shall be cleared to 0 15-7 6 000000000b V 5 80 Reserved for SATA 1b Reserved for SATA 1b 1 = Software settings preservation enabled 0b Reserved for SATA 4 V 0b 1 = In-order data delivery enabled 3 V 0b 1 = Device initiated power management enabled 2 V 0b 1 = DMA setup auto-activation enabled 1 V 0b 1 = Nonzero buffer offsets enabled 0 F 0b Shall be cleared to 0 15-10 000000b Reserved 9 F 1b 1 = Supports ATA8-ACS2 8 F 1b 1 = Supports ATA-8-ACS 7 F 1b 1 = Supports ATA/ATAPI-7 6 F 1b 1 = Supports ATA/ATAPI-6 5 F 1b 1 = Supports ATA/ATAPI-5 4 F 1b 1 = Supports ATA/ATAPI-4 3 X 0b Obsolete 2 X 0b Obsolete 1 X 0b Obsolete 0b Reserved 0 81 Minor version number F PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 0028h 0028h = ATA8-ACS version 6 11 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 82 15 X 0b Obsolete 14 F 1b 1 = NOP command support 13 F 1b 1 = READ BUFFER command support 12 F 1b 1 = WRITE BUFFER command support 11 X 0b Obsolete 10 F 1b 1 = Host-protected area feature set support 9 F 0b Shall be cleared to 0 to indicate that the DEVICE RESET command is not supported 8 F 0b 1 = Service interrupt support 7 F 0b 1 = Release interrupt support 6 F 1b 1 = READ look-ahead support 5 F 1b 1 = Volatile write cache support 4 F 0b Shall be cleared to 0 to indicate that the PACKET feature set is not supported 3 F 1b Shall be set to 1 to indicate that mandatory power management feature set is supported 2 X 0b Obsolete 1 F 1b 1 = Security feature set support 0 F 1b 1 = SMART feature set support PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 12 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 83 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13 F 1b 1 = FLUSH CACHE EXT command support 12 F 1b Shall be set to 1 to indicate that the mandatory FLUSH CACHE command is supported 11 F 1b 1 = Device configuration overlay feature set support 10 F 1b 1 = 48-bit address feature set support 9 F 0b 1 = Automatic acoustic management feature set support 8 F 1b 1 = SET MAX security extension support 7 84 0b Reserved for address offset reserved area boot method 6 F 0b 1 = SET FEATURES subcommand required to spin up after power up 5 F 0b 1 = Power-up in standby feature set support 4 X 0b Obsolete 3 F 1b 1 = Advanced power management feature set support 2 F 0b 1 = CFA feature set support 1 X 0b Obsolete 0 F 1b 1 = DOWNLOAD MICROCODE command support 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13 F 1b 1 = The IDLE IMMEDIATE command with unload feature is supported 0b Reserved for TLC 12 0b Reserved for TLC 10-9 11 X 00b Obsolete 8 F 1b 1 = 64-bit worldwide name support 7 X 0b Obsolete 6 F 1b 1 = WRITE DMA FUA EXT (and) WRITE MULTIPLE FUA EXT commands are supported 5 F 1b 1 = General purpose logging feature set support 4 F 0b 1 = Streaming feature set support 3 F 0b 1 = Media card passthrough command feature set support 2 F 0b 1 = Media serial number support 1 F 1b 1 = SMART self-test support 0 F 1b 1 = SMART error logging support PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 13 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 85 86 15 X 0b Obsolete 14 F 1b 1 = NOP command support 13 F 1b 1 = READ BUFFER command support 12 F 1b 1 = WRITE BUFFER command support 11 X 0b Obsolete 10 V 1b 1 = Host-protected area feature set support 9 F 0b 1 = DEVICE RESET command support 8 V 0b 1 = Service interrupt enabled 7 V 0b 1 = Release interrupt enabled 6 V 1b 1 = Read look-ahead enabled 5 V 1b 1 = Volatile write cache enabled 4 F 0b 0 = Packet feature set is not supported 3 F 1b 1 = Power management feature set is enabled 2 X 0b Obsolete 1 V 0b 1 = Security feature set enabled 0 V 1b 1 = SMART feature set enabled 15 F 1b 1 = Words 120 and 119 are valid 0b 1 = Reserved 14 13 F 1b 1 = FLUSH CACHE EXT command supported 12 F 1b 1 = FLUSH CACHE command supported 11 F 1b 1 = Device configuration overlay (DCO) feature set supported 10 F 1b 1 = 48-bit address feature set support 9 V 0b 1 = Automatic acoustic management feature set enabled 8 F 0b 1 = SET MAX security extension enabled by SET MAX SET PASSWORD 7 0b Reserved for address offset reserved area boot method 6 F 0b 1 = SET FEATURES subcommand required to spin up after power up 5 V 0b 1 = Power-up in standby feature set enabled 4 X 0b Obsolete 3 V 1b 1 = Advanced power management feature set enabled 2 F 0b 1 = CFA feature set enabled 1 X 0b Obsolete 0 F 1b 1 = DOWNLOAD MICROCODE command support PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 14 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 87 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13 F 1b 1 = IDLE IMMEDIATE command with unload feature support 0b Reserved for TLC 12 0b Reserved for TLC 10-9 11 X 00b Obsolete 8 F 1b 1 = 64-bit worldwide name support 7 X 0b Obsolete 6 F 1b 1 = WRITE DMA FUA EXT (and) WRITE MULTIPLE FUA EXT commands are supported 5 F 1b 1 = General purpose logging feature set support 4 X 0b Obsolete 3 V 0b 1 = Media card passthrough command feature set support 2 V 0b 1 = Media serial number is valid 1 F 1b 1 = SMART self-test support 0 F 1b 1 = SMART error logging support PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 15 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 88 15 0b Reserved 14 V 0b 1 = Ultra DMA mode 6 is selected 0 = Ultra DMA mode 6 is not selected 13 V 0b 1 = Ultra DMA mode 5 is selected 0 = Ultra DMA mode 5 is not selected 12 V 0b 1 = Ultra DMA mode 4 is selected 0 = Ultra DMA mode 4 is not selected 11 V 0b 1 = Ultra DMA mode 3 is selected 0 = Ultra DMA mode 3 is not selected 10 V 0b 1 = Ultra DMA mode 2 is selected 0 = Ultra DMA mode 2 is not selected 9 V 0b 1 = Ultra DMA mode 1 is selected 0 = Ultra DMA mode 1 is not selected 8 V 0b 1 = Ultra DMA mode 0 is selected 0 = Ultra DMA mode 0 is not selected 7 89 0b Reserved 6 F 1b 1 = Ultra DMA mode 6 and below supported 5 F 1b 1 = Ultra DMA mode 5 and below supported 4 F 1b 1 = Ultra DMA mode 4 and below supported 3 F 1b 1 = Ultra DMA mode 3 and below supported 2 F 1b 1 = Ultra DMA mode 2 and below supported 1 F 1b 1 = Ultra DMA mode 1 and below supported 0 F 1b 1 = Ultra DMA mode 0 support 00h Reserved 01h Time required for normal erase mode SECURITY ERASE UNIT command 00h Reserved 01h Time required for enhanced erase mode SECURITY ERASE UNIT command 15-8 7-0 90 F 15-8 7-0 F 91 V 00FEh Current advanced power management value 92 V 0000h Master password identifier PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 16 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 93 15 F 0b Shall be cleared to 0 14 F 0b Shall be set to 1 13 V 0b 1 = Device detected CBLID above ViH 0 = Device detected CBLID below ViL 0b Reserved 12 11 V 0b 0 = Device 1 did not assert PDIAG 1 = Device asserted PDIAG 10-9 V 00b These bits indicate how device 1 determined the device number: 00 = Reserved 01 = Jumper used 10 = CSEL signal used 11 = Other method used or method used unknown 0b Shall be set to 1 8 7 F 0b Reserved 6 F 0b 0 = Device 0 does not respond when device 1 is selected 1 = Device 0 responds when device 1 is selected 5 V 0b 0 = Device 0 did not detect the assertion of DASP 1 = Device 0 detected the assertion of DASP 4 V 0b 0 = Device 0 does not detect the assertion of PDIAG 1 = Device 0 detected the assertion of PDIAG 3 V 0b 0 = Device 0 failed diagnostics 1 = Device 0 passed diagnostics 2-1 V 00b These bits indicate how device 0 determined the device number: 00 = Reserved 01 = Jumper used 10 = CSEL signal used 11 = Other method used or method used unknown 0 F 0b Shall be set to 1 15-8 F 00h Vendor's recommended auto acoustic management (AAM) value 7-0 V 00h Current auto acoustic management (AAM) value 95 F 0000h Stream minimum request size 96 F 0000h Streaming transfer time - DMA 97 F 0000h Streaming access latency - DMA and PIO 98 F 0000h 0000h 94 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Streaming performance granularity 17 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 100 F LBA 104 F 0000h Streaming transfer time - PIO 105 F 0008h Maximum number of 512-byte blocks of LBA range entries per DATA SET MANAGEMENT command 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13 F 0b 1 = Device has multiple logical sectors per physical sector 12 F 0b 1 = Device logical sector size > 256 words 11-4 F 00000000b 3-0 F 0000b 2xP logical sectors per physical sector F 0000h Interseek delay for ISO-7779 standard acoustic testing 15-12 F 0101b NAA (3-0) 11-0 F 000000001010b IEEE OUI (23-12) 15-4 F Varies IEEE OUI (11-0) Varies Unique ID (35-32) 106 107 108 109 3-0 Maximum user LBA for 48-bit address feature set Reserved 110 F Varies 5-0 Unique ID (31-16) 111 F Varies Unique ID (15-0) 112 0000h 0000h 0000h 0000h 116 0000h Reserved for TLC F 0000h 0000h Logical sector size 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 117 119 13-8 000000b Reserved Reserved 7 F 0b 1 = Extended power conditions feature set supported 6 F 1b 1 = Extended sense data reporting feature set supported 5 F 1b 1 = Free-fall control feature set supported 4 F 1b 1 = DOWNLOAD MICROCODE command with mode 3 supported 3 F 1b 1 = READ LOG DMA EXT (and) WRITE LOG DMA EXT command support 2 F 1b 1 = WRITE UNCORRECTABLE EXT support 1 F 0b 1 = Write-read-verify feature set support 0 F 0b Reserved for DDT PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 18 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 120 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13-8 000000b 7 V 0b 1 = At least one extended power conditions idle timer is enabled 6 V 0b 1 = Extended sense data reporting feature set enabled 5 V 0b 1 = Free-fall control feature set enabled 4 F 1b 1 = DOWNLOAD MICROCODE command with mode 3 supported 3 F 1b 1 = READ LOG DMA EXT (and) WRITE LOG DMA EXT command support 2 F 0b 1 = WRITE UNCORRECTABLE EXT support 1 V 0b 1 = Write-read-verify feature set enabled 0b Reserved for DDT 0 121 0000h 0000h 0000h 0000h 0000h 0000h 127 128 X 15-9 8 V 7-6 Reserved for expanded support and enabled settings 0000h Obsolete 0000000b Reserved 0b Master password capability: 0 = High, 1 = Maximum 00b Reserved 5 F 1b 1 = Enhanced security erase support 4 V 0b 1 = Security count expired 3 V 0b 1 = Security frozen 2 V 0b 1 = Security locked 1 V 0b 1 = Security enabled 0 F 1b 1 = Security supported X Varies F 0b CFA power mode 129 160 Reserved 15 14 Vendor specific 0b Word 160 supported 13 F 0b CFA power mode 1 is required for one or more commands implemented by the device 12 V 0b CFA power mode 1 disabled 11-0 F 000000000000b PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Maximum current in ma 19 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 161 168 169 F 15-4 000h 3-0 F 3h 15-1 F 000000000000000b 0 F 1b F 0000h 0000h 0000h 0000h 170 174 0000h 0000h 176 206 0000h 0000h 0000h 0000h 0000h 0000h 0000h F 15-12 X 11-6 Reserved for assignment by the CFA Reserved Device nominal form factor (DNFF) Reserved 1 = Trim bit of the DATA SET MANAGEMENT command supported Additional product identifier Reserved Varies Current media serial number (60 ASCII characters; not supported) 0000b Vendor specific 000000b Reserved 5 F 1b SCT data tables command support 4 F 1b SCT FEATURES CONTROL command support 3 F 1b SCT ERROR RECOVERY CONTROL command support 2 F 1b SCT WRITE SAME command support 1 F 0b Obsolete 0 F 1b SCT command transport support 207 F 0000h 0000h Reserved FOR CE-ATA 15 F 0b Shall be cleared to 0 14 F 1b Shall be set to 1 13-0 F 00000000000000b 210 V 0000h 0000h Write-read-verify sector count mode 3 212 F 0000h 0001h Write-read-verify sector count mode 2 15-12 F 0000b NV cache feature set version 11-8 F 0000b NV cache power mode feature set version 000b Reserved 209 214 7-5 4 V 3-2 Logical sector offset within the first physical sector where the first logical sector is placed 0b 1 = NV cache feature set enabled 00b Reserved 1 V 0b 1 = NV cache power mode feature set enabled 0 F 0b 1 = NV cache power mode feature set support PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 20 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 215 V 0000h NV cache size in logical blocks (LSW) 216 V 0000h NV cache size in logical blocks (MSW) 217 F 0001h Nominal media rotation rate 0000h Reserved 00h Reserved 00h Device estimated time to spin up in seconds 00h Reserved 00h Write-read-verify feature set current mode 218 219 15-8 7-0 220 F 15-8 7-0 V 15-12 F 221 222 11-6 0000h Reserved 0001b Transport type: 0 = Parallel; 1 = SATA; 2-15 = Reserved 000000b 0 = Reserved 1 = Reserved 5 F 1b 0 = Reserved 1 = SATA Rev. 3.0 4 F 1b 0 = Reserved 1 = SATA Rev. 2.6 3 F 1b 0 = Reserved 1 = SATA Rev. 2.5 2 F 1b 0 = Reserved 1= SATA II: extensions 1 F 1b 0 = ATA/ATAPI-7 1= SATA 1.0a 0 F 1b 0 = ATA8-APT 1 = ATA8-AST F 0000h 223 224 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h Transport minor revision number Reserved 234 F 0001h Minimum number of 512-byte units per DOWNLOAD MICROCODE command mode 3 235 F 00FFh Maximum number of 512-byte units per DOWNLOAD MICROCODE command mode 3 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 21 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Device ID Table 6: IDENTIFY Device ID (Continued) * F = The content of the word is fixed and does not change * V = The content of the word is variable and may change depending on the state of the device or the commands executed by the device * X = The fixed or variable type of this field is not defined in the governing standard * R = The content of the word is reserved and shall be zero Word Bit(s) Setting Default Value Description 236 255 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h Reserved 15-8 F Varies Checksum 7-0 F A5h Signature PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 22 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Commands Commands Table 7: Supported ATA Command Set See ATA8-ACS2 standard for command details Command Name PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Command Code (Hex) CHECK POWER MODE 98h CHECK POWER MODE E5h DEVICE CONFIGURATION B1h DOWNLOAD MICROCODE 92h FLUSH CACHE E7h FLUSH CACHE EXT EAh IDLE E3h IDLE 97h IDLE IMMEDIATE 95h IDLE IMMEDIATE E1h NOP 00h READ BUFFER E4h READ BUFFER DMA E9h READ DMA C8h READ DMA EXT 25h READ DMA (without retries) C9h READ FPDMA QUEUED 60h READ LOG DMA EXT 47h READ LOG EXT 2Fh READ MULTIPLE C4h READ MULTIPLE EXT 29h READ NATIVE MAX ADDRESS F8h READ NATIVE MAX ADDRESS EXT 27h READ SECTORS 20h READ SECTORS EXT 24h READ SECTORS (without retry) 21h READ VERIFY SECTORS 40h READ VERIFY SECTORS EXT 42h READ VERIFY SECTORS (without retry) 41h RECALIBRATE 10h REQUEST SENSE DATA EXT 0Bh SECURITY DISABLE PASSWORD F6h SECURITY ERASE PREPARE F3h SECURITY ERASE UNIT F4h SECURITY FREEZE LOCK F5h SECURITY SET PASSWORD F1h 23 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Commands Table 7: Supported ATA Command Set (Continued) See ATA8-ACS2 standard for command details Command Name PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Command Code (Hex) SECURITY UNLOCK F2h SEEK 70h SET FEATURES EFh SET MAX ADDRESS F9h SET MULTIPLE MODE C6h SET NATIVE MAX ADDRESS EXT 37h SLEEP 99h SLEEP E6h SMART B0h STANDBY E2h STANDBY 96h STANDBY IMMEDIATE 94h STANDBY IMMEDIATE E0h WRITE BUFFER E8h WRITE BUFFER DMA EBh WRITE DMA CAh WRITE DMA EXT 35h WRITE DMA FUA EXT 3Dh WRITE DMA (without retries) CBh WRITE FPDMA QUEUED 61h WRITE LOG DMA EXT 57h WRITE LOG EXT 3Fh WRITE MULTIPLE C5h WRITE MULTIPLE EXT 39h WRITE MULTIPLE FUA EXT CEh WRITE SECTORS 30h WRITE SECTORS EXT 34h WRITE SECTORS (without retry) 31h 24 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Reliability Reliability Micron SSDs incorporate advanced technology for defect and error management. Micron uses various combinations of hardware-based error correction algorithms and firmware-based static and dynamic wear-leveling algorithms. Over the life of the SSD, uncorrectable errors may occur. An uncorrectable error is defined as data that is reported as successfully programmed to the SSD but when it is read out of the SSD, the data differs from what was programmed. Table 8: Uncorrectable Bit Error Rate Uncorrectable Bit Error Rate Operation 1016 READ <1 sector per bits read Mean Time Between Failures Mean time between failures (MTBFs) for the SSD can be predicted based on the component reliability data using the methods referenced in the Telcordia SR-332 reliability prediction procedures for electronic equipment. Table 9: MTBFs MTBF (Operating Hours)1 Density Note: 50GB 2 million 100GB 2 million 200GB 2 million 1. The product achieves a mean time between failure (MTBF) of 2 million hours, based on population statistics not relevant to individual units. Endurance Endurance for the SSD can be predicted based on the usage conditons applied to the device, the internal NAND component cycles, the write amplification factor, and the wear-leveling efficency of the drive. The table below shows the drive lifetime for each SSD density based on predefined usage conditions. Table 10: Drive Lifetime Density Notes: PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN Drive Lifetime (Total Bytes Written) 50GB .875PB 100GB 1.75PB 200GB 3.5PB 1. Total bytes written calculated with the drive 100% full. 2. Access patterns are 50% sequential and 50% random. Random accesses: 10% are 512B; 50% are 4K; 15% are 32K; 15% are 64K; and 10% are 128K. Sequential accesses: 100% are 128K. 25 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Reliability Data Retention Micron SSD data retention at beginning of life: 10 years at 25C Micron SSD data retention at end of life: 1 year at 25C PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 26 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Electrical Characteristics Electrical Characteristics Table 11: SATA Typical Power Consumption Idle/Standby/Sleep Secure Erase SEQ Write/Read (128K XFR) 50GB 125 1000 2500/1800 1900/1500 mW 100B 125 1200 3000/2000 2200/1700 mW 200GB 125 1400 3500/2200 2500/1900 mW Density RND Write/Read (4K XFR) Unit Table 12: Maximum Ratings Parameter/Condition Symbol Min Max Unit Voltage input V5 4.5 5.5 V Operating temperature TA 0 70 C -40 85 C Rate of temperature change - 20 C/hour Relative humidity (noncondensing) 5 95 % Non-operating temperature Stresses greater than those listed may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Table 13: Shock and Vibration Parameter/Condition Specification Operating shock 1500G/0.5ms Operating vibration PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 5-500Hz at 3.1G 27 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Compliance Compliance Micron SSDs comply with the following: * * * * * * * * * * * * * RoHS compliant Halogen free SATA-IO WHQL CE (Europe): EN55022, 2006 Class B and EN55024, 1998 + A1: 2001 + A2:2003 FCC: CFR Title 47, Part 15, ICES-003, all Class B UL (US): approval to UL-60950-1, 2nd Edition, 2007-03-27, IEC 60950-1:2005, 2nd Edition BSMI (Taiwan): approval to CNS 13438 C-TICK (Australia, New Zealand): approval to AS/NZS CISPR22 KCC RRL (Korea): approval to KCC MU2-C30025, KCC MU2-C30018 Class B W.E.E.E.: Compliance with EU WEEE directive 2002/96/EC. Additional obligations may apply to customers who place these products in the markets where WEEE is enforced. TUV (Germany): approval to IEC60950/EN60950 VCCI FCC Rules This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 28 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Package Dimensions Package Dimensions Figure 4: 2.5-Inch Package 13.43mm 0.529in 9.50mm 0.20 0.374in 0.008 14.00mm 0.551in 3.50mm 0.38 0.138in 0.015 M3 x 0.5mm (2 PLCS) 3.00mm 0.118in 90.60mm 3.567in (100.50mm) (3.957in) (0.30mm) (0.012in) M3 x 0.5mm 4.07mm 0.160in 61.71mm 2.430in 69.85mm 0.25 2.750in 0.010 9.40mm 0.370in 14.00mm 0.551in 3.0mm 0.12in RAD 90.60mm 3.567in 100.20mm 0.25 3.945in 0.01 Notes: 1. Maximum mounting screw length: Bottom = M3 x 0.5 x 3; Side = M3 x 0.5 x 4 2. Maximum torque: 4.5 in-lb Figure 5: Thermocouple Placement Guidelines for Temperature Measurement Center thermocouple here 35.5mm Power and data connectors Non-label side of SSD 3mm 3mm 3mm 3mm 34.5mm 71.2mm PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 30.8mm 29 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD References References * Serial ATA: High-speed serialized AT attachment, Serial ATA working group, available at www.sata-io.org * Small Form Factor Specification SFF-8201, SFF-8223 * Electronic Industries Association Standard, EIA-720 * Telcordia SR-332 reliability prediction procedures for electronic equipment * IDEMA Document LBA1-02 PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 30 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved. P300 2.5-Inch NAND Flash SSD Revision History Revision History Rev. K - 5/12 * Added center thermocouple graphic to package dimensions. Rev. J - 4/12 * Added notes to package dimension graphic. Rev. I - 10/11 * Added FCC rules to Compliance. Rev. H - 5/11 * Added DOWNLOAD MICROCODE command to Table 7: Supported ATA Command Set; changed hex format of command codes. Rev. G - 5/11 * Changed overall length of the enclosure + connector from absolute maximums to reference dimensions in packaging figure. Rev. F - 4/11 * Removed references to altitude from Features section. Rev. E - 4/11 * Removed references to green from Compliance section. 8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900 www.micron.com/productsupport Customer Comment Line: 800-932-4992 Micron and the Micron logo are trademarks of Micron Technology, Inc. All other trademarks are the property of their respective owners. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization sometimes occur. PDF: 09005aef840793dc p300_2_5.pdf - Rev. K 5/12 EN 31 Micron Technology, Inc. reserves the right to change products or specifications without notice. (c) 2010 Micron Technology, Inc. All rights reserved.