Vishay General Semiconductor
GBL005 thru GBL10
Document Number 88609
03-Jun-06
www.vishay.com
1
Glass Passivated Single-Phase Bridge Rectifier
FEATURES
• UL Recognition file number E54214
• Ideal for printed circuit boards
• High surge current capability
• Typical IR less than 0.1 µA
• High case dielectric strength
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
General purpose use in ac-to-dc bridge full wave
rectification for Monitor, TV, Printer, SMPS, Adapter,
Audio equipment, and Home Appliances application.
MECHANICAL DATA
Case: GBL
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated (E3 Suffix) leads,
solderable per J-STD-002B and JESD22-B102D
Polarity: As marked on body
Case Type GBL
~
~
~~
MAJOR RATINGS AND CHARACTERISTICS
IF(AV) 4 A
VRRM 50 V to 1000 V
IFSM 150 A
IR5 µA
VF1.0 V
Tj max. 150 °C
Note:
(1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate
(2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (12 x 12 mm) copper pads
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified
output current at
TC = 50 °C
TA = 40 °C IF(AV) 4.0 (1)
3.0 (2) A
Peak forward surge current single sine-wave
superimposed on rated load IFSM 150 A
Rating for fusing (t < 8.3 ms) I2t 93 A2sec
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
www.vishay.com
2
Document Number 88609
03-Jun-06
Vishay General Semiconductor
GBL005 thru GBL10
Note:
(1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate
(2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (12 x 12 mm) copper pads
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT
Maximum instantaneous
forward voltage drop per leg at 4.0 A VF 1.00 V
Maximum DC reverse
current at rated DC blocking
voltage per leg
TA = 25 °C
TA = 125 °C IR 5.0
500 µA
Typical junction
capacitance per leg at 4.0 V, 1 MHz CJ95 40 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT
Typical thermal resistance per leg RθJA
RθJC
22 (2)
3.5 (1) °C/W
ORDERING INFORMATION
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
GBL06-E3/45 2.18 45 20 Tube
GBL06-E3/51 2.18 51 400 Anti-static PVC Tray
Figure 1. Derating Curves Output Rectified Current
050 100 150
0
1.0
2.0
3.0
4.0
5.0
60 Hz Resistive or Inductive Load
Heat-Sink Mounting
3.0 x 3.0 x 0.11" Thick
(7.5 x 7.5 x 0.3 cm)
Aluminium Plate
P. C . B . M o unted
0.47 x 0.47" (12 x 12 mm)
Copper Pads with 0.375"
(9.5 mm) Lead Length
Ambient Temperature (°C)
Average Forward Output Current (A)
Figure 2. Maximum Non-Repetitive Peak Forward Surge
Current Per Leg
110 100
0
50
100
150
1.0 Cycle
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
TJ = TJ max.
Single Sine-Wave
Document Number 88609
03-Jun-06
www.vishay.com
3
GBL005 thru GBL10
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 3. Typical Forward Voltage Characteristics Per Leg
Figure 4. Typical Reverse Characteristics Per Leg
0.4 0.6 0.81.0 1.2 1.4 1.6
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
T
J
= 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
020 40 60 80100
0.01
0.1
1
10
100
500
50 - 400 V
60 - 1000 V
TA = 125 °C
TA = 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (A)
Figure 5. Typical Junction Capacitance Per Leg
Figure 6. Typical Transient Thermal Impedance Per Leg
0.1 110 100
10
100
1000
50 - 400 V
600 - 1000 V
Reverse Voltage (V)
Junction Capacitance (pF)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.01 0.1 110 100
0.1
1
10
100
t - Heating Time (s)
Transient Thermal Impedance (°C/W)
0.125 (3.17)
x45degrees
Chamfer
0.080 (2.03)
0.060 (1.50)
0.095 (2.41)
0.080 (2.03)
0.825 (20.9)
0.815 (20.7)
0.050 (1.27)
0.040 (1.02)
Polarity shown on front side of case, positive lead beveled corner.
0.040 (1.02)
0.030 (0.76)
0.022 (0.56)
0.018(0.46)
0.210
0.190
(5.3)
(4.8)
0.421 (10.7)
0.411 (10.4)
0.718(18.2)
0.682 (17.3)
0.140 (3.56)
0.128(3.25)
Lead Depth
0.098(2.5)
0.075 (1.9)
0.098(2.5)
0.075 (1.9)
0.026 (0.66)
0.020 (0.51)
Case Type GBL
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
