GBL005 thru GBL10 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES * UL Recognition file number E54214 * Ideal for printed circuit boards * High surge current capability ~ ~ * Typical IR less than 0.1 A ~ ~ * High case dielectric strength * Solder Dip 260 C, 40 seconds Case Type GBL * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home Appliances application. MAJOR RATINGS AND CHARACTERISTICS IF(AV) 4A VRRM 50 V to 1000 V IFSM 150 A IR 5 A VF 1.0 V Tj max. 150 C MECHANICAL DATA Case: GBL Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked on body MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS VDC Maximum DC blocking voltage Maximum average forward rectified output current at TC = 50 C TA = 40 C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 UNIT 1000 V 560 700 V 800 1000 V (1) IF(AV) 4.0 3.0 (2) A IFSM 150 A I2t 93 A2sec TJ, TSTG - 55 to + 150 C Note: (1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate (2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (12 x 12 mm) copper pads Document Number 88609 03-Jun-06 www.vishay.com 1 GBL005 thru GBL10 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage drop per leg at 4.0 A SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT VF 1.00 V Maximum DC reverse TA = 25 C current at rated DC blocking TA = 125 C voltage per leg IR 5.0 500 A Typical junction capacitance per leg CJ at 4.0 V, 1 MHz 95 40 pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 RJA RJC Typical thermal resistance per leg UNIT (2) 22 3.5 (1) C/W Note: (1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate (2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (12 x 12 mm) copper pads ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE GBL06-E3/45 2.18 45 20 Tube GBL06-E3/51 2.18 51 400 Anti-static PVC Tray RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 60 Hz Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Output Current (A) 5.0 Heat-Sink Mounting 3.0 x 3.0 x 0.11" Thick (7.5 x 7.5 x 0.3 cm) Aluminium Plate 4.0 3.0 2.0 P.C.B. Mounted 0.47 x 0.47" (12 x 12 mm) Copper Pads with 0.375" (9.5 mm) Lead Length 1.0 TJ = TJ max. Single Sine-Wave 100 50 1.0 Cycle 0 0 0 50 100 150 1 10 100 Ambient Temperature (C) Number of Cycles at 60 Hz Figure 1. Derating Curves Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg www.vishay.com 2 Document Number 88609 03-Jun-06 GBL005 thru GBL10 Vishay General Semiconductor 1000 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 TJ = 25 C Pulse Width = 300 s 1 % Duty Cycle 0.1 0.01 0.4 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 50 - 400 V 600 - 1000 V 10 0.6 1.2 1.0 0.8 1.4 1.6 0.1 100 10 1 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Voltage Characteristics Per Leg Figure 5. Typical Junction Capacitance Per Leg 100 Transient Thermal Impedance (C/W) Instantaneous Reverse Current (A) 500 100 10 TA = 125 C 50 - 400 V 60 - 1000 V 1 0.1 TA = 25 C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 1 0.1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Characteristics Per Leg Figure 6. Typical Transient Thermal Impedance Per Leg PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Type GBL 0.125 (3.17) x 45 degrees Chamfer 0.825 (20.9) 0.815 (20.7) 0.421 (10.7) 0.411 (10.4) 0.080 (2.03) 0.060 (1.50) 0.098 (2.5) 0.075 (1.9) 0.718 (18.2) 0.682 (17.3) Lead Depth 0.022 (0.56) 0.018 (0.46) 0.095 (2.41) 0.080 (2.03) 0.098 (2.5) 0.075 (1.9) 0.050 (1.27) 0.040 (1.02) 0.040 (1.02) 0.030 (0.76) 0.210 (5.3) 0.190 (4.8) 0.026 (0.66) 0.020 (0.51) 0.140 (3.56) 0.128 (3.25) Polarity shown on front side of case, positive lead beveled . corner Document Number 88609 03-Jun-06 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1