a FEATURES 200 MSPS Guaranteed Conversion Rate 135 MSPS Low Cost Version Available 350 MHz Analog Bandwidth 1 V p-p Analog Input Range Internal +2.5 V Reference and T/H Low Power: 500 mW +5 V Single Supply Operation TTL Output Interface Single or Demultiplexed Output Ports APPLICATIONS RGB Graphics Processing High Resolution Video Digital Data Storage Read Channels Digital Communications Digital Instrumentation Medical Imaging GENERAL DESCRIPTION The AD9054 is an 8-bit monolithic analog-to-digital converter optimized for high speed, low power, small size and ease of use. With a 200 MSPS encode rate capability and full-power analog bandwidth of 350 MHz, the component is ideal for applications requiring the highest possible dynamic performance. To minimize system cost and power dissipation, the AD9054 includes an internal +2.5 V reference and track-and-hold circuit. The user provides only a +5 V power supply and an encode clock. No external reference or driver components are required for many applications. 8-Bit, 200 MSPS A/D Converter AD9054 FUNCTIONAL BLOCK DIAGRAM VREF IN AD9054 AIN T/H AIN ENCODE ENCODE VREF OUT 12.5V REFERENCE QUANTIZER 8 ENCODE LOGIC DEMULTIPLEXER 8 TIMING VDD GND DEMUX DS DA7 -DA0 DB7 -DB0 DS The AD9054's encode input interfaces directly to TTL, CMOS or positive-ECL logic and will operate with single-ended or differential inputs. The user may select dual-channel or singlechannel digital outputs. The dual (demultiplexed) mode interleaves ADC data through two 8-bit channels at one-half the clock rate. Operation in demultiplexed mode reduces the speed and cost of external digital interfaces while allowing the ADC to be clocked to the full 200 MSPS conversion rate. In the singlechannel (nondemultiplexed) mode, all data is piped at the full clock rate to the Channel A outputs. Fabricated with an advanced BiCMOS process, the AD9054 is provided in a space-saving 44-lead TQFP surface mount plastic package (ST-44) and specified over the full industrial (-40C to +85C) temperature range. REV. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 (c) Analog Devices, Inc., 1997 AD9054-SPECIFICATIONS ELECTRICAL CHARACTERISTICS (V Parameter Temp DD = +5 V, external reference, fS = max unless otherwise noted) Test Level Min AD9054BST-200 Typ Max RESOLUTION DC ACCURACY Differential Nonlinearity 8 0.9 1.0 0.6 0.9 Guaranteed 2 160 8 +25C Full +25C Full Full +25C Full I VI I VI VI I V Full Full +25C Full +25C Full +25C +25C Full +25C V V I VI I VI V I VI V REFERENCE OUTPUT Output Voltage Temperature Coefficient Full Full VI V 2.4 SWITCHING PERFORMANCE Maximum Conversion Rate (f S) Minimum Conversion Rate (f S) Encode Pulsewidth High (tEH) Encode Pulsewidth Low (t EL) Aperture Delay (tA) Aperture Uncertainty (Jitter) Data Sync Setup Time (t SDS) Data Sync Hold Time (t HDS) Data Sync Pulsewidth (t PWDS) Output Valid Time (t V)3 Output Propagation Delay (t PD)3 Full Full +25C +25C +25C +25C +25C +25C +25C Full Full VI IV IV IV V V IV IV IV VI VI 200 DIGITAL INPUTS HIGH Level Current (I IH)4 LOW Level Current (I IL)4 Input Capacitance Full Full +25C VI VI V DIFFERENTIAL INPUTS Differential Signal Amplitude (VID) HIGH Input Voltage (VIHD) LOW Input Voltage (V ILD) Common-Mode Input (V ICM) Full Full Full Full IV IV IV IV 400 1.5 0 1.5 VDD VDD - 0.4 DEMUX INPUT HIGH Input Voltage (V IH) LOW Input Voltage (V IL) Full Full IV IV 2.0 0 VDD 0.8 Full Full VI VI 2.4 Integral Nonlinearity No Missing Codes Gain Error1 Gain Tempco1 ANALOG INPUT Input Voltage Range (With Respect to AIN) Compliance Range AIN or AIN Input Offset Voltage Input Resistance Input Capacitance Input Bias Current Analog Bandwidth, Full Power 2 DIGITAL OUTPUTS HIGH Input Voltage (V OH) LOW Input Voltage (V OL) Output Coding AD9054BST-135 Min Typ Max 0.9 1.0 0.6 0.9 Guaranteed 2 160 +1.5/-1.0 +2.0/-1.0 1.5 2.0 7 512 1.8 36 23 4 8 62 4 25 1.8 36 23 2.6 2.4 LSB LSB LSB LSB 7 % FS ppm/C 3.2 16 19 50 75 2.5 110 2.6 135 5.1 5.9 500 500 3 25 15 15 3.0 3.0 0.5 2.3 0.5 2.3 0 0.5 2.0 2.7 7.9 5.7 7.5 8.5 V ppm/C MSPS MSPS ns ns ns ps rms ns ns ns ns ns A A pF 400 1.5 0 1.5 VDD VDD - 0.4 mV V V V 2.0 0 VDD 0.8 V V 0.4 V V 500 500 3 2.4 Binary mV p-p V mV mV k k pF A A MHz 625 625 625 625 0.4 -2- +1.5/-1.0 +2.0/-1.0 1.5 2.0 350 25 15 15 2.0 2.0 0 0.5 2.0 2.7 4 8 62 4 25 50 75 350 2.5 110 Bits 512 3.2 16 19 Units Binary REV. 0 AD9054 Parameter Temp Test Level POWER SUPPLY VDD Supply Current (IDD) Power Dissipation5, 6 Full Full VI VI 100 500 145 725 100 500 140 700 mA mW +25C I 0.005 0.015 0.005 0.015 V/V +25C +25C V V 1.5 1.5 +25C Full +25C Full +25C Full IV V I V I V +25C Full +25C Full +25C Full IV V I V I V +25C +25C +25C IV I I +25C +25C +25C Power Supply Sensitivity 7 DYNAMIC PERFORMANCE Transient Response Overvoltage Recovery Time Signal-to-Noise Ratio (SNR) (Without Harmonics) fIN = 19.7 MHz AD9054BST-200 Min Typ Max AD9054BST-135 Min Typ Max Units 8 fIN = 49.7 MHz fIN = 70.1 MHz Signal-to-Noise Ratio (SINAD) (With Harmonics) fIN = 19.7 MHz fIN = 49.7 MHz fIN = 70.1 MHz Effective Number of Bits fIN = 19.7 MHz fIN = 49.7 MHz fIN = 70.1 MHz 2nd Harmonic Distortion fIN = 19.7 MHz fIN = 49.7 MHz fIN = 70.1 MHz 3rd Harmonic Distortion fIN = 19.7 MHz fIN = 49.7 MHz fIN = 70.1 MHz Two-Tone Intermod Distortion (IMD) fIN = 19.7 MHz fIN = 49.7 MHz fIN = 70.1 MHz 42 1.5 1.5 ns ns 45 45 45 45 dB dB dB dB dB dB 43 43 43 43 dB dB dB dB dB dB 45 45 45 45 45 45 42 43 43 43 43 42 42 40 6.35 6.35 6.18 6.85 6.85 6.85 6.35 6.35 6.85 6.85 Bits Bits Bits IV I I 58 54 52 63 59 55 58 54 63 59 dBc dBc dBc +25C +25C +25C IV I I 48 48 43 56 54 50 48 48 56 54 dBc dBc dBc +25C +25C +25C V V V 60 55 dBc dBc dBc 42 42 40 40 39 60 55 50 42 40 NOTES 1 Gain error and gain temperature coefficient are based on the ADC only (with a fixed +2.5 V external reference). 2 3 dB bandwidth with full-power input signal. 3 tV and tPD are measured from the threshold crossing of the ENCODE input to valid TTL levels of the digital outputs. The output ac load during test is 5 pF (Refer to equivalent circuits Figures 5 and 6). 4 IIH and IIL are valid for differential input voltages of less than 1.5 V. At higher differential voltages, the input current will increase to a maximum of 1.25 mA. 5 Power dissipation is measured under the following conditions: analog input is -1 dBfs at 19.7 MHz. 6 Typical thermal impedance for the ST-44 (TQFP) 44-lead package (in still air): JC = 20C/W, CA = 35C/W, JA = 55C/W. 7 A change in input offset voltage with respect to a change in V DD. 8 SNR/harmonics based on an analog input voltage of -1.0 dBfs referenced to a 1.024 V full-scale input range. Specifications subject to change without notice. IV. Parameter is guaranteed by design and characterization testing. EXPLANATION OF TEST LEVELS Test Level V. Parameter is a typical value only. I. 100% production tested. VI. 100% production tested at +25C; guaranteed by design and characterization testing for industrial temperature range. II. 100% production tested at +25C and sample tested at specified temperatures. III. Sample tested only. REV. 0 -3- AD9054 PIN FUNCTION DESCRIPTIONS ABSOLUTE MAXIMUM RATINGS* VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6 V Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . VDD to 0.0 V Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . VDD to 0.0 V VREF IN, VREF OUT . . . . . . . . . . . . . . . . . . . VDD to 0.0 V Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Operating Temperature . . . . . . . . . . . . . . . . -55C to +125C Storage Temperature . . . . . . . . . . . . . . . . . . -65C to +150C Maximum Junction Temperature . . . . . . . . . . . . . . . +175C Maximum Case Temperature . . . . . . . . . . . . . . . . . . +150C Pin Number Name Function 1 ENCODE 2 ENCODE Encode Clock for ADC (ADC Samples on Rising Edge of ENCODE). Encode Clock Complement (ADC Samples on Falling Edge of ENCODE). Power Supply (+5 V). 3, 5, 15, 18, 28, VDD 30, 31, 36, 41 4, 6, 16, 17, 27, GND 29, 32, 35, 37, 40 14-7 DA0-DA7 *Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions outside of those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum ratings for extended periods may affect device reliability. Digital Outputs of ADC Channel A. DA7 is the MSB, DA0 the LSB. DB0-DB7 Digital Outputs of ADC Channel B. DB7 is the MSB, DB0 the LSB. VREF OUT Internal Reference Output (+2.5 V typical); Bypass with 0.1 F to Ground. VREF IN Reference Input for ADC (+2.5 V typical, 4%). AIN Analog Input--Complement. Connect to input signal midscale reference. AIN Analog Input--True. DEMUX Format Select. LOW = Dual. Channel Mode, HIGH = Single. Channel Mode (Channel A Only). DS Data Sync Complement. DS Data Sync--Aligns output channels in Dual-Channel Mode. Table I. Output Coding 19-26 Step AIN-AIN Code Binary 255 254 253 * * * 129 128 127 126 * * * 2 1 0 0.512 V 0.508 V 0.504 V * * * 0.006 V 0.002 V -0.002 V -0.006 V * * * -0.504 V -0.508 V -0.512 V 255 254 253 * * * 129 128 127 126 * * * 2 1 0 1111 1111 1111 1110 1111 1101 * * * 1000 0001 1000 0000 0111 1111 0111 1110 * * * 0000 0010 0000 0001 0000 0000 Ground. 33 34 38 39 42 43 44 *ST = Plastic Thin Quad Flatpack (TQFP). DB4 DB5 DB7 (MSB) DB6 GND ST-44 ST-44 Evaluation Board VDD -40C to +85C -40C to +85C +25C GND AD9054BST-200 AD9054BST-135 AD9054/PCB VDD Package Option* VDD Temperature Range VREF OUT Model GND PIN CONFIGURATION ORDERING GUIDE VREF IN DB3 GND DB2 VDD DB1 DB0 (LSB) GND AIN VDD AD9054 AIN GND TOP VIEW (PINS DOWN) GND GND VDD VDD DEMUX DA0 (LSB) DS DA1 CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD9054 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. -4- DA3 DA4 DA5 DA6 DA7 (MSB) VDD DA2 GND GND VDD ENCODE ENCODE PIN 1 IDENTIFIER DS WARNING! ESD SENSITIVE DEVICE REV. 0 AD9054 SAMPLE N SAMPLE N-1 SAMPLE N+3 SAMPLE N+4 AIN SAMPLE N+1 tA tEH tEL SAMPLE N+2 1/fS ENCODE ENCODE tPD DATA N-5 D7 -D 0 DATA N-4 DATA N-3 DATA N-2 DATA N-1 tV DATA N Figure 1. Timing--Single Channel Mode SAMPLE N SAMPLE N-1 SAMPLE N+3 SAMPLE N+4 SAMPLE N+5 AIN SAMPLE N-2 tEL tHDS SAMPLE N+2 SAMPLE N+6 1/fS ENCODE ENCODE SAMPLE N+1 tA tEH tHDS tSDS tSDS DS DS tPD tPWDS PORT A D7 -D 0 DATA N-7 OR N-8 PORT B D7 -D 0 DATA N-8 OR N-7 DATA N-7 OR N-6 DATA N-6 OR N-7 INVALID IF OUT OF SYNC DATA N-4 IF IN SYNC INVALID IF OUT OF SYNC DATA N-5 IF IN SYNC -5- DATA N DATA N-2 DATA N-3 Figure 2. Timing--Dual Channel Mode REV. 0 tV DATA N-1 DATA N+1 AD9054 EQUIVALENT CIRCUITS VDD 17.5kV DEMUX AIN AIN 300V VDD 300V 7.5kV Figure 3. Equivalent Analog Input Circuit Figure 6. Equivalent DEMUX Input Circuit VDD VDD VREF IN DIGITAL OUTPUTS Figure 7. Equivalent Digital Output Circuit Figure 4. Equivalent Reference Input Circuit VDD VDD 17.5kV ENCODE OR DS 300V 300V ENCODE OR DS VREF OUT 7.5kV Figure 5. Equivalent ENCODE and Data Select Input Circuit Figure 8. Equivalent Reference Output Circuit -6- REV. 0 Typical Performance Characteristics- AD9054 55 45.4 45.2 50 50MHz 20MHz 45.0 SNR 45 dB 44.8 dB SINAD 70MHz 44.6 40 44.4 NYQUIST FREQUENCY (100MHz) 35 44.2 30 0 20 40 60 80 fIN - MHz 100 120 44.0 -45 140 25 TC - 8C 70 90 Figure 12. SNR vs. Temperature, fS = 135 MSPS 50 46.0 49 45.8 48 45.6 47 45.4 46 45.2 20MHz 50MHz SNR 45 dB dB Figure 9. SNR vs. fIN: fS = 200 MSPS 0 44 44.8 SINAD 43 44.6 42 44.4 41 44.2 40 25 50 75 70MHz 45.0 100 125 150 175 200 225 250 270 fS - MSPS 44.0 -60 300 Figure 10. SNR vs. fS: fIN = 19.7 MHz -40 -20 0 20 40 TC - 8C 60 80 100 Figure 13. SNR vs. Temperature, fS = 200 MSPS 50 50 48 SNR 45 FS = 135MSPS FIN = 10.3MHz 46 SINAD 44 40 dB dB 42 35 SNR 40 38 SINAD 30 36 34 25 32 20 25 50 75 100 125 150 175 200 225 250 fS - MSPS 30 0.0 270 300 2.0 3.0 4.0 5.0 6.0 ENCODE PULSEWIDTH - ns 7.0 8.0 Figure 14. SNR vs. Clock Pulsewidth, (tPWH): fS = 135 MSPS Figure 11. SNR vs. fS: fIN = 70.1 MHz REV. 0 1.0 -7- AD9054 -70 50 48 FS = 200MSPS FIN = 10.3MHz -68 SNR 2ND HARMONIC -66 46 -64 44 -62 SINAD -60 dBc dB 42 40 -56 38 -54 36 -52 34 -50 32 30 0.0 3RD HARMONIC -58 -48 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 ENCODE PULSEWIDTH - ns 4.5 -46 25 5.0 Figure 15. SNR vs. Clock Pulsewidth, (tPWH): fS = 200 MSPS 50 75 100 125 150 175 200 225 250 fS - MSPS 270 300 Figure 18. Harmonic Distortion vs. fS: fIN = 19.7 MHz 46 -60 45 -50 44 2ND HARMONIC 20MHz -40 dB 43 3RD HARMONIC 70MHz 42 -30 50MHz 41 -20 40 -10 39 38 -60 -40 -20 0 20 40 TC - 8C 60 80 0 25 100 50 75 100 125 150 175 200 225 250 270 300 fS - MSPS Figure 16. SINAD vs. Temperature: fS = 135 MSPS Figure 19. Harmonic Distortion vs. fS: fIN = 70.1 MHz 46 -40 45 -45 44 20MHz -50 43 42 dB dB 50MHz 70MHz -55 70MHz 41 -60 50MHz 40 -65 39 38 -60 -40 -20 0 20 40 TC - 8C 60 80 -70 -60 100 Figure 17. SINAD vs. Temperature: fS = 200 MSPS 20MHz -40 -20 0 20 TC - 8C 40 60 80 100 Figure 20. 2nd Harmonic vs. Temperature: fS = 135 MSPS -8- REV. 0 -40 0 -45 -1 -50 -2 dB dB AD9054 -55 -3 70MHz -4 -60 NYQUIST FREQUENCY 100MHz 50MHz -5 -65 20MHz -70 -60 -40 -20 0 20 TC - 8C 40 60 80 -6 100 0 Figure 21. 2nd Harmonic vs. Temperature: fS = 200 MSPS 50 100 150 200 250 300 fIN - MHz 350 400 450 500 Figure 24. Frequency Response: fS = 200 MSPS -40 0 FUNDAMENTAL = -0.5dBfs SNR = 45.8dB SINAD = 45.2dB 2ND HARMONIC = 69.8dB 3RD HARMONIC = 61.6dB -10 -45 -20 -30 -50 70MHz -40 dB dB 50MHz -55 -50 20MHz -60 -60 -70 -65 -80 -70 -60 -40 -20 0 20 TC - 8C 40 60 80 -90 0 100 20 30 40 50 60 MHz 70 80 90 100 Figure 25. Spectrum: fS = 200 MSPS, fIN = 19.7 MHz Figure 22. 3rd Harmonic vs. Temperature: fS = 135 MSPS 0 -40 FUNDAMENTAL = -0.5dBfs SNR = 44.6dB SINAD = 37.6dB 2ND HARMONIC = -63.1dB 3RD HARMONIC = -39.1dB -10 -45 -20 70MHz -30 -50 50MHz -40 dB dB 10 -55 -50 20MHz -60 -60 -70 -65 -80 -70 -60 -90 -40 -20 0 20 TC - 8C 40 60 80 0 100 20 30 40 50 60 MHz 70 80 90 100 Figure 26. Spectrum: fS = 200 MSPS, fIN = 70.1 MHz Figure 23. 3rd Harmonic vs. Temperature: fS = 200 MSPS REV. 0 10 -9- AD9054 7 0 F1 = 55.0MHz F2 = 56.0MHz F1 = F2 = -7.0dBfs -10 -20 tV 5 -30 -40 4 ns dB tPD 6 -50 3 -60 -70 2 -80 1 -90 0 -60 -100 0 10 20 30 40 50 60 MHz 70 80 90 100 5.0 2.55 4.5 2.54 4.0 2.53 3.5 2.52 3.0 2.5 2.0 1.5 0 20 TC - 8C 40 60 80 100 2.51 2.50 2.49 2.48 1.0 2.47 0.5 2.46 0.0 0.0 -20 Figure 30. Output Delay vs. Temperature VREF OUT - Volts VOH - Volts Figure 27. Two Tone Intermodulation Distortion -40 2.45 -20 -18 -16 -1.0 -2.0 -3.0 -4.0 -5.0 -6.0 -7.0 -8.0 -9.0 -10.0 IOH - mA -14 -12 -10 -8 -6 IREF OUT - mA -4 -2 0 2 Figure 31. Reference Voltage vs. Reference Load Figure 28. Output Voltage HIGH vs. Output Current 2.502 1.0 0.9 0.8 2.501 VREF OUT - Volts VOL - Volts 0.7 0.6 0.5 0.4 2.500 0.3 2.499 0.2 0.1 0.0 0.0 1.0 2.0 3.0 4.0 5.0 IOL - mA 6.0 7.0 2.498 3.0 8.0 Figure 29. Output Voltage LOW vs. Output Current 3.5 4.0 4.5 5.0 VDD - Volts 5.5 6.0 6.5 Figure 32. Reference Voltage vs. Power Supply Voltage -10- REV. 0 AD9054 2.502 rapidly slewing signal. The AD9054's extremely wide bandwidth Track/Hold circuit processes these signals without difficulty. Using the AD9054 VREF OUT - Volts 2.501 Good high speed design practices must be followed when using the AD9054. To obtain maximum benefit, decoupling capacitors should be physically as close to the chip as possible. We recommend placing a 0.1 F capacitor at each power-ground pin pair (9 total) for high frequency decoupling, and including one 10 F capacitor for local low frequency decoupling. The VREF IN pin should also be decoupled by a 0.1 F capacitor. 2.500 2.499 2.498 -40 -20 0 20 40 60 80 100 TAMB - 8C Figure 33. Reference Voltage vs. Temperature APPLICATION NOTES THEORY OF OPERATION The AD9054 combines Analog Devices' patented MagAmp bitper-stage architecture with flash converter technology to create a high performance, low power ADC. For ease of use the part includes an onboard reference and input logic that accepts TTL, CMOS or PECL levels. The analog input signal is buffered by a high-speed differential amplifier and applied to a track-and-hold (T/H) circuit. This T/H captures the value of the input at the sampling instant and maintains it for the duration of the conversion. The sampling and conversion process is initiated by a rising edge on the ENCODE input. Once the signal is captured by the T/H, the four Most Significant Bits (MSBs) are sequentially encoded by the MagAmp string. The residue signal is then encoded by a flash comparator string to generate the four Least Significant Bits (LSBs). The comparator outputs are decoded and combined into the eight-bit result. Minimum Encode Rate The minimum sampling rate for the AD9054 is 25 MHz. To achieve very high sampling rates, the track/hold circuit employs a very small hold capacitor. When operated below the minimum guaranteed sampling rate, the T/H droop becomes excessive. This is first observed as an increase in offset voltage, followed by degraded linearity at even lower frequencies. Lower effective sampling rates may be easily supported by operating the converter in dual port output mode and using only one output channel. A majority of the power dissipated by the AD9054 is static (not related to conversion rate) so the penalty for clocking at twice the desired rate is not high. Reference If the user has selected Single Channel Mode (DEMUX = HIGH), the eight-bit data word is directed to the Channel A output bank. Data are strobed to the output on the rising edge of the ENCODE input with four pipeline delays. If the user has selected Dual Channel Mode (DEMUX = LOW) the data are alternately directed between the A and B output banks and have five pipeline delays. At power-up, the N sample data can appear at either the A or B port. To align the data in a known state the user must strobe DATA SYNC (DS, DS) per the conditions described in the Timing section. Graphics Applications The high bandwidth and low power of the AD9054 make it very attractive for applications that require the digitization of presampled waveforms, wherein the input signal rapidly slews from one level to another and is relatively stable for a period of time. Examples of these include digitizing the output of computer graphic display systems and very high speed solid state imagers. The AD9054 internal reference, VREF, provides a simple, cost effective reference for many applications. It exhibits reasonable accuracy and excellent stability over power supply and temperature variations. The VREF OUT pin can simply be strapped to the VREF IN pin. The internal reference can be used to drive additional loads (up to several mA), including multiple A/D converters as might be required in a triple video converter application. When an external reference is desired for accuracy or other requirements, the AD9054 should be driven directly by the external reference source connected to pin VREF IN (VREF OUT can be left floating). The external reference can be set to 2.5 V 0.25 V. If VREF IN is raised by 10% (set to 2.75 V) the analog full-scale range will increase by 10% to 1.024 x 1.1 = 1.1264 V. The new input range will then be AIN 0.5632 V. Digital Inputs These applications require the converter to process inputs with frequency components well in excess of the sampling rate (often with subnanosecond rise times), after which the A/D must settle and sample the input in well under one pixel time. The architecture of the AD9054 is vastly superior to older flash architectures, which not only exhibit excessive input capacitance (which is very hard to drive) but can make major errors when fed a very REV. 0 The part should be located on a solid ground plane and output trace lengths should be short (<1 inch) to minimize transmission line effects. This avoids the need for termination resistors on the output bus and reduces the load capacitance that needs to be driven, which in turn minimizes on-chip noise due to heavy current flow in the outputs. We have obtained optimum performance on our evaluation board by tying all VDD pins to a quiet analog power supply system, and tying all GND pins to a quiet analog system ground. SNR performance is directly related to the sampling clock stability in A/D converters, particularly for high input frequencies and wide bandwidths. A low jitter clock (<10 ps @ 100 MHz) is essential for optimum performance when digitizing signals that are not presampled. ENCODE and Data Select (DS) can be driven differentially or single-ended. For single-ended operation, the complement inputs (ENCODE, DS) are internally biased to VDD/3 (~1.5 V) by a high impedance on-chip resistor divider (Figure 5), but they may be externally driven to establish an alternate threshold if desired. A 0.1 F decoupling capacitor to ground is sufficient to maintain a threshold appropriate for TTL or CMOS logic. -11- AD9054 When driven differentially, ENCODE and DS will accommodate differential signals centered between 1.5 V and 4.5 V with a total differential swing 800 mV (VID 400 mV). VREF OUT 0.1mF VREF IN Note the 6-diode clock input protection circuitry in Figure 5. This limits the differential input voltage to ~ 2.1 V. When the diodes turn on, current is limited by the 300 series resistor. Exceeding 2.1 V across the differential inputs will have no impact on the performance of the converter, but be aware of the clock signal distortion that may be produced by the nonlinear impedance at the converter. AD9054 1kV AIN VIN 0.1mF +5V DEMUX DS CLOCK CLOCK ENC ENC VIC M ENC 0.1mF ENC ENC 0.1mF NC VID CLOCK NC = NO CONNECT Figure 35. Single Port Mode--AC-Coupled Input--SingleEnded Encode a. Driving Differential Inputs Differentially ENC DS VIH D VIL D CLOCK A PORT AIN Dual Port Mode VIH D In Dual Port Mode (DEMUX = LOW), the conversion results are alternated between the two output ports (Figure 2). This limits the data output rate at either port to 1/2 the conversion rate (ENCODE), and supports conversion at up to 200 MSPS with TTL/CMOS compatible interfaces. Dual Channel Mode is required for guaranteed operation above 100 MSPS, but may be enabled at any specified conversion rate. VID VIC M VIL D b. Driving Differential Inputs Single-Endedly Figure 34. Input Signal Level Definitions The multiplexing is controlled internally via a clock divider, which introduces a degree of ambiguity in the port assignments. Figure 2 illustrates that, prior to synchronization, either Port A or Port B may produce the even or odd samples. This is resolved by exercising the Data Sync (DS) control, a differential input (identical to the ENCODE input), which facilitates operation at high speed. Single Port Mode When operated in a Single Port mode (DEMUX = HIGH), the timing of the AD9054 is similar to any high speed A/D Converter (Figure 1). A sample is taken on every rising edge of ENCODE, and the resulting data is produced on the output pins following the FOURTH rising edge of ENCODE after the sample was taken (four pipeline delays). The output data are valid tPD after the rising edge of ENCODE, and remain valid until at least tV after the next rising edge of ENCODE. The maximum clock rate is specified as 100 MSPS. This is recommended because the guaranteed output data valid time equals the Clock Period (1/fS) minus the Output Propagation Delay (tPD) plus the Output Valid Time (tV), which comes to 4.8 ns at 100 MHz. This is about as fast as standard logic is able to capture the data with reasonable design margins. The AD9054 will operate faster in single-channel mode if you are able to capture the data. When operating in Single-Channel Mode, the outputs at Port B are held static in a random state. Figure 35 shows the AD9054 used in single-channel output mode. The analog input (0.5 V) is ac coupled and the ENCODE input is driven by a TTL level signal. The chip's internal reference is used. At least once after power-up, and prior to using the conversion data, the part needs to be synchronized by a falling edge (or a positive-going pulse) on DS (observing setup and hold times with respect to ENCODE). If the converter's internal timing is in conflict with the DS signal when it is exercised, then two data samples (one on each port) are corrupted as the converter is resynchronized. The converter then produces data with a known phase relationship from that point forward. Note that if the converter is already properly synchronized, the DS pulse has no effect on the output data. This allows the converter to be continuously resynchronized by a pulse at 1/2 the ENCODE rate. This signal is often available within a system, as it represents the master clock rate for the demultiplexed output data. Of course, a single DS signal may be used to synchronize multiple A/D converters in a multichannel system. Applications that call for the AD9054 to be synchronized at power-up or only periodically during calibration/reset (i.e., valid data is not required prior to synchronization), need only be concerned with the timing of the falling edge of DS. The falling edge of DS must satisfy the setup time defined by Figure 2 and -12- REV. 0 AD9054 the specification table. In this case the DS hold time specification on the rising edge can be ignored. Applications that will continuously update the synchronization command need to treat the DS signal as a pulse and satisfy timing requirements on both rising and falling edges. It is easiest to consider the DS signal in this case to be a pulse train at one half the encode rate, the positive pulse nominally bracketing the ENCODE falling edge on alternate cycles as shown in the timing diagram (Figure 2). The falling/rising edge of DS has to satisfy a minimum setup time (TSDS) before the rising/falling edge of ENCODE; similarly, the rising/falling edge of DS has to satisfy a minimum hold time (THDS) relative to the rising/falling edge of ENCODE. DS can fall a minimum of THDS after ENCODE falls and a maximum of TSDS before the next ENCODE rises. DS can rise a minimum of THDS after ENCODE rises and a maximum of TSDS before ENCODE falls. This timing requirement produces a tight timing window at higher encode rates. Synchronization by a single reset edge results in a simpler timing solution in many applications. For example, synchronization may be provided at the beginning of each graphics line or frame. In Dual Channel Mode, the converted data is produced five clock cycles after the rising edge of ENCODE on which the sample is taken (five pipeline delays). VREF OUT 0.1mF VREF IN A PORT AIN AD9054 1kV '573 AIN VIN 0.1mF B PORT DEMUX DS DS ENC ENC 0.1mF DS NC CLOCK '74 DIVIDE BY 2 The data are presented at the output of the AD9054 in a pingpong (alternating) fashion to optimize the performance of the converter. It may be aligned for presentation as sixteen bits in parallel by adding a register stage to the output. NC = NO CONNECT Figure 36. Dual Port Mode--Aligned Output Data In Figure 36, the converter is operating in Dual Port Mode, with data coming alternately out of Port A and Port B. The figure illustrates how the output data may be aligned with an output latch to produce a 16-bit output at 1/2 the conversion clock rate. The Data Sync input must be properly exercised to time the A Port with the synchronizing latch. REV. 0 -13- AD9054 EVALUATION BOARD Voltage Reference The AD9054 evaluation board offers an easy way to test the AD9054. It provides dc biasing for the analog input, generates the latch clocks for both full speed and demuxed modes, and includes a reconstruction DAC. The board has several different modes of operation, and is shipped in the following configuration: The AD9054 has an internal 2.5 V voltage reference. An external reference may be employed instead. The evaluation board is configured for the internal reference. To use an external reference, connect it to the (VREF) pin on the power connector and move jumper S102. * * * * Single Port Mode DC-Coupled Analog Input Demuxed Outputs Differential Clocks Internal Voltage Reference. Single Port Mode sets the AD9054 to produce data on every clock cycle on output port A only. To test in this mode, jumper S104 should be set to single channel and S106 and S107 must be set to F (for Full). The maximum speed in single port mode is 100 MSPS. VREF EXT DC BIAS S102 AIN S103 Dual Port Mode VREF OUT Dual Port or half speed output mode sets the ADC to produce data alternately on Port A and Port B. In this mode, the reset function should be implemented. To test in this mode, set jumper S104 to Dual Channel, and set S106 and S107 to D (for Dual Port). The maximum speed in this mode is 200 MSPS. A PORT VREF IN '574 50V AIN AD9054 AIN RESET BUTTON A PORT 5V RESET '574 RESET drives the AD9054's Data Sync (DS) pins. When operating in Single Port Mode, RESET is not used. In DualChannel Mode it is needed for two reasons: to synchronize the timing of Port A data and Port B data with a known clock edge, as described in the data sheet, and to synchronize the evaluation board's latch clocks with the data coming out of the AD9054. Reset can be driven in two ways: by pushing the reset button on the board, or externally, with a TTL pulse through connector J5 or J6. DEMUX D D FF S104 C S105 CLK A DS DS ENC ENC CLK B DAC ENC 50V ENC ENC CLK A DAC Out ENC CLOCKING CLK B The DAC output is a representation of the data on output Port A only. Output Port B is not reconstructed. 50V Troubleshooting Figure 37. PCB Block Diagram If the board does not seem to be working correctly, try the following: Analog Input * Check that all jumpers are in the correct position for the desired mode of operation. The evaluation board accepts a 1 V input signal centered at ground. The board's input circuitry then biases this signal to +2.5 V in one of two ways: 1. DC-coupled through an AD9631 op amp; this is the mode in which it is shipped. Potentiometer R7 provides adjustment of the bias voltage. 2. AC-coupled through C1. These two modes are selected by jumpers S101 and S103. For dc coupling, the S101 jumper is connected between the two left pins and the S103 jumper is connected between the two lower pins. For ac coupling, the S101 jumper is connected between the two right pins and the S103 jumper is connected between the two upper pins. ENCODE The AD9054 ENCODE input can be driven two ways: 1. Differential TTL, CMOS, or PECL; it is shipped in this mode. * Push the reset button. This will align the 9054's data output with the half speed latch clocks. * Switch the jumper S105 from A-R to R-B or vice-versa, then push the reset button. In demuxed mode, this will have the effect of inverting the half speed latch clocks. * At high encode rates, the evaluation board's clock generation circuitry is sensitive to the +5 V digital power supply. At high encode rates, the +5 V digital power should be kept below +5.2 V. This is an evaluation board sensitivity and not an AD9054 sensitivity. The AD9054 Evaluation Board is provided as a design example for customers of Analog Devices, Inc. ADI makes no warranties, express, statutory, or implied, regarding merchantability or fitness for a particular purpose. 2. Single-ended TTL or CMOS. To use in this mode, remove R11, the 50 chip resistor located next to the ENCODE input, and insert a 0.1 F ceramic capacitor into the C5 slot. C5 is located between the ENC connector and the ENCODE input to the DUT and is marked on the back side of the board. In this mode, ENCODE is biased with internal resistors to 1.5 V, but it can be externally driven to any dc voltage. -14- REV. 0 Figure 38. Evaluation Board Schematic +5VA +5V ENC ENC R1 49.9V 2 C23 10mF C9 10mF BNC J3 C24 0.1mF C10 0.1mF C25 0.1mF C11 0.1mF R4 140V R5 10V 3 2 Q 4 5 +5V TB1 4 3 C26 0.1mF 11 C27 0.1mF C13 0.1mF +5V GND -5.2V +5VA VREF 6 12 2 C29 0.1mF C14 0.1mF 1 3 -5.2V UA1 AD9054BST C20 0.1mF 2 3 1 3 4 5 10H125 U7 C16 0.1mF C30 10mF 1 3 C31 0.1mF C17 0.1mF Q1 3 R1 4 C32 0.1mF C18 0.1mF 2 2 C33 0.1mF C19 0.1mF 1 3 C34 0.1mF 15 13 C21 0.1mF 10H125 14 U7 11 10H125 10 U7 12 7 S107 JUMPER 2 +5VA GND GND +5VA 6 S106 JUMPER C5 22 21 20 19 18 17 16 15 14 13 12 S105 JUMPER 11 DB3 DB2 DB1 (LSB) DB0 VDD GND GND VDD (LSB) DA0 DA1 DA2 23 10H125 U7 6 U6 5 10H131 GND 1 ENC ENC VREF OUT VREF IN GND VDD GND AIN AIN GND VDD DEMUX DS DS 33 C3 10mF S1 2 7 D1 Q1 1 2 3 4 5 6 5PB 510 RP1 2 C15 0.1mF 1 3 34 35 GND 36 +5VA 37 GND 38 39 40 GND 41 +5VA 42 43 S104 44 JUMPER -5.2V +5VA GND R9 100V 1 3 6 C Q CL U2 1 74F74 D PR +5V AD96685R U3 C12 0.1mF 5 4 3 2 1 R12 1kV GND VREF +5V ANALOG -5.2V GROUND +5V DIGITAL R11 49.9V R10 49.9V C1 0.1mF 2 6 C36, C37, AND R17-R20 NOT INSTALLED FOR STANDARD OPERATION C4 0.1mF RST +5V 1 3 140V S101 JUMPER R2 B1 BUTTON BNC J2 +5V AIN BNC J1 3 S103 JUMPER 2 GND +5VA +5VA GND +5VA GND GND VDD VDD GND VDD GND VDD GND VDD GND +5VA GND +5VA GND U1 AD9631R DB7 DB6 DB5 DB4 DA7 DA6 DA5 DA4 DA3 C35 0.1mF C22 0.1mF 1 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q OE 12 13 14 15 16 17 18 19 11 1D 2D 3D 4D 5D 6D 7D 8D CK +5V 28 1 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q OE RST GND 1 2 3 4 5 6 7 8 9 10 CLK 12 13 14 15 16 17 18 19 U5 74F574DW 11 1D 2D 3D 4D 5D 6D 7D 8D CK U4 74F574DW C28 0.1mF 9 8 7 6 5 4 3 2 9 8 7 6 5 4 3 2 U8 AD9760AR C6 0.1mF +5V C8 0.1mF 17 16 15 R14 2kV 18 C7 0.1mF 27 24 23 19 DVDD VREF AVDD S102 JUMPER COMP2 C2 0.1mF COMP1 R3 100V FSADJ R8 2kV REFIO R7 1kV DB9 DB8 DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 (LSB) -15- REFLO REV. 0 SLEEP R6 2kV A I OUT B 3 13 14 15 16 17 18 19 20 22 21 R15 49.9V R16 49.9V 21 30 31 32 33 34 35 36 37 2 2 BNC J4 DRA B8A B7A B6A B5A B4A B3A B2A B1A DRB B1B B2B B3B B4B B5B B6B B7B B8B DAC OUT RESET C37 DRPF J6 20 29 28 27 26 25 24 23 22 R39 R21 R21-R39 100V 11 10 9 8 7 6 5 4 1 12 H20SM J5 AD9054 AD9054 Figure 39. Assembly--Top View Figure 41. Conductors--Top View Figure 40. Assembly--Bottom View Figure 42. Conductors--Bottom View -16- REV. 0 AD9054 BILL OF MATERIALS GS00104 REV. B ITEM QTY PART NUMBER REFERENCE DESCRIPTION MFG/DISTRIBUTOR 11 30 GRM40Z5U104M050BL C1, C2, C4, C6-8, C10-C22, C24-C29, C31-C35 0.1 F CER CHIP CAP 0805 TTI 12 1 P10FBK-ND R5 10 SURFACE MT RES 1206 DIGI-KEY 13 21 P100FBK-ND R3, R9, R21-R39 100 SURFACE MT RES 1206 DIGI-KEY 14 4 T491C106M016AS C3, C9, C23, C30 10 F TANTALUM CHIP CAP TTI 15 2 P140FBK-ND R2, R4 140 SURFACE MT RES 1206 DIGI-KEY 16 1 P1KFBK-ND R12 1 k SURFACE MT RES 1206 DIGI-KEY 17 3 P2KFBK-ND R6, R8, R14 2 k SURFACE MT RES 1206 DIGI-KEY 18 1 3296W-102-ND R7 1k TRIM POT TOP ADJ, 25 TURN DIGI-KEY 19 1 K44-C37S-QJ J6 37P D CONN RT ANG PCMT FEM CENTURY ELEC 10 5 P49.9FBK-ND R1, R10, R11, R15, R16 49.9 SURFACE MT RES 1206 DIGI-KEY 11 1 CSC06A-01-511G RP1 510 6P BUSED RES NETWORK TTI 12 1 51F54113 TB1 8291Z 3-PIN TERMINAL BLOCK NEWARK 13 1 51F54112 TB1 8291Z 2-PIN TERMINAL BLOCK NEWARK 14 4 AMP-227699-2 J1-J4 BNC COAX CONN PCMT 5 LEAD TIME ELEC 15 1 MC10H131P U6 DIP-16 DUAL D FLIP-FLOP HAMILTON/HALLMARK 16 1 MC10H125P U7 DIP-16 QUAD ECL TO TTL TRANS HAMILTON/HALLMARK 17 1 74F74SC-ND U2 SO-14 FAST TTL DUAL D FLIP-FLOP DIGI-KEY 18 1 TSW-120-08-G-S J5 HEADER STRIP 20P GOLD MALE SAMTEC ALT: 1/2 90F3987 J5 40P HEADER NEWARK 19 1 AD96685BR U3 HIGH SPEED COMP SOIC-16 ANALOG DEVICES, INC. 20 7 S90F9280 S101-S107 SHORTING JUMPER NEWARK 21 8 89F4700 S101-S107, GND 3-PIN HEADER (DIVIDE 1 OF THE 8 FOR 3 GND HOLES) NEWARK 22 2 MC74F574DW U4, U5 SO-20 OCTAL D TYPE FLIP-FLOP HAMILTON/HALLMARK 23 1 AD9631AR U1 SOIC-8 OP AMP ANALOG DEVICES, INC. 24 1 AD9760AR U8 10-BIT CMOS DAC SOIC-28 ANALOG DEVICES, INC. 25 1 AD9054ST UA1 TQFP-44 DUAL 8-BIT ADC ANALOG DEVICES, INC. 26 1 P8002SCT-ND B1 SURFACE MOUNT MOMENTARY PUSHBUTTON DIGI-KEY 27 4 90F1533 - BUMPON PROTECTIVE BUMPER NEWARK PARTS NOT ON BILL OF MATERIALS, AND NOT TO BE INSTALLED: C5, C36, C37, R17-R20. REV. 0 -17- AD9054 OUTLINE DIMENSIONS Dimensions shown in inches and (mm). 44-Lead Plastic Thin Quad Flatpack (TQFP) (ST-44) 0.063 (1.60) MAX 0.472 (12.00) SQ 0.030 (0.75) 0.018 (0.45) 33 23 34 22 SEATING PLANE 0.394 (10.0) SQ TOP VIEW (PINS DOWN) 44 12 1 0.006 (0.15) 0.002 (0.05) 0.057 (1.45) 0.053 (1.35) 0.031 (0.80) BSC -18- 11 0.018 (0.45) 0.012 (0.30) REV. 0 -19- -20- PRINTED IN U.S.A. C3146-8-10/97