Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, Downsized, 105℃
LXZSeries
・Adoption of innovative electrolyte and new technologies
・Very low impedance at high frequency
・Endurance with ripple current: 2,000 to 8,000 hours at 105℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -55 to +105℃
Rated Voltage Range
6.3 to 63Vdc
Capacitance Tolerance
±20% (M) (at 20℃, 120Hz)
Leakage Current I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes)
Dissipation Factor
(tanδ)
Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V
tanδ(Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Time φ5 & 6.3 : 2,000hours φ8 : 3,000hours φ10 : 5,000hoursφ12.5 : 7,000hours φ16 & 18 : 8,000hours
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value
Leakage current ≦The initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value
Leakage current ≦The initial specified value
◆DIMENSIONS [mm]
5
0.5
2.0
φD
φd
F
φD'
L'
6.3
0.5
2.5
8
0.6
3.5
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
10
0.6
5.0
φD+0.5max.
L+1.5max.
L' 15min. 4min.
φD'
φd
Vent
(Exceptφ5 & φ6.3)
F±0.5
Sleeve (PET : Dark blue)
(φ5 to φ10) (φ12.5 to φ18)
Gas escape end seal
●
Terminal Code : E
F±0.5
◆PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 150µF:151, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 25V:250, 50V:500)
Series code
Category
E L X Z E M
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (radial lead type)"
Lower Z
Downsized
LXZ
Lower Z
LXY P180
LXV P182
177 CAT. No. E1001Q
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, Downsized, 105℃
LXZSeries
◆STANDARD RATINGS
WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No. WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No.
20℃-10℃20℃-10℃
6.3
150 5×11.5 0.50 1.0 175
ELXZ6R3E□□151MEB5D
16
3,300 12.5×35 0.022 0.044 2,510
ELXZ160E□□332MK35S
330 6.3×11.5 0.25 0.50 290
ELXZ6R3E□□331MFB5D
3,900 12.5×40 0.017 0.034 2,870
ELXZ160E□□392MK40S
470 6.3×15 0.18 0.36 400
ELXZ6R3E□□471MF15D
3,900 16×25 0.022 0.044 2,560
ELXZ160E□□392ML25S
680 8×12 0.12 0.24 555
ELXZ6R3E□□681MH12D
3,900 18×20 0.028 0.056 2,490
ELXZ160E□□392MM20S
820 10×12.5 0.090 0.18 760
ELXZ6R3E□□821MJC5S
4,700 16×30 0.019 0.038 3,010
ELXZ160E□□472ML30S
1,000 8×15 0.090 0.18 730
ELXZ6R3E□□102MH15D
4,700 18×25 0.020 0.040 2,740
ELXZ160E□□472MM25S
1,200 8×20 0.080 0.16 810
ELXZ6R3E□□122MH20D
5,600 16×35 0.017 0.034 3,150
ELXZ160E□□562ML35S
1,200 10×16 0.068 0.136 1,050
ELXZ6R3E□□122MJ16S
5,600 18×30 0.018 0.036 3,330
ELXZ160E□□562MM30S
1,500 10×20 0.052 0.104 1,220
ELXZ6R3E□□152MJ20S
6,800 16×40 0.015 0.030 3,710
ELXZ160E□□682ML40S
2,200 10×25 0.045 0.090 1,440
ELXZ6R3E□□222MJ25S
8,200 18×35 0.016 0.032 3,680
ELXZ160E□□822MM35S
2,700 10×30 0.037 0.074 1,690
ELXZ6R3E□□272MJ30S
10,000 18×40 0.015 0.030 3,800
ELXZ160E□□103MM40S
3,300 12.5×20 0.038 0.076 1,660
ELXZ6R3E□□332MK20S
25
47 5×11.5 0.50 1.0 175
ELXZ250E□□470MEB5D
3,900 12.5×25 0.030 0.060 1,950
ELXZ6R3E□□392MK25S
100 6.3×11.5 0.25 0.50 290
ELXZ250E□□101MFB5D
4,700 12.5×30 0.025 0.050 2,310
ELXZ6R3E□□472MK30S
150 6.3×15 0.18 0.36 400
ELXZ250E□□151MF15D
5,600 12.5×35 0.022 0.044 2,510
ELXZ6R3E□□562MK35S
220 8×12 0.12 0.24 555
ELXZ250E□□221MH12D
5,600 16×20 0.029 0.058 2,210
ELXZ6R3E□□562ML20S
330 8×15 0.090 0.18 730
ELXZ250E□□331MH15D
6,800 12.5×40 0.017 0.034 2,870
ELXZ6R3E□□682MK40S
330 10×12.5 0.090 0.18 760
ELXZ250E□□331MJC5S
6,800 16×25 0.022 0.044 2,560
ELXZ6R3E□□682ML25S
390 8×20 0.080 0.16 810
ELXZ250E□□391MH20D
6,800 18×20 0.028 0.056 2,490
ELXZ6R3E□□682MM20S
470 10×16 0.068 0.136 1,050
ELXZ250E□□471MJ16S
8,200 16×30 0.019 0.038 3,010
ELXZ6R3E□□822ML30S
680 10×20 0.052 0.104 1,220
ELXZ250E□□681MJ20S
10,000 16×35 0.017 0.034 3,150
ELXZ6R3E□□103ML35S
820 10×25 0.045 0.090 1,440
ELXZ250E□□821MJ25S
10,000 18×25 0.020 0.040 2,740
ELXZ6R3E□□103MM25S
1,000 10×30 0.037 0.074 1,690
ELXZ250E□□102MJ30S
12,000 16×40 0.015 0.030 3,710
ELXZ6R3E□□123ML40S
1,000 12.5×20 0.038 0.076 1,660
ELXZ250E□□102MK20S
12,000 18×30 0.018 0.036 3,330
ELXZ6R3E□□123MM30S
1,500 12.5×25 0.030 0.060 1,950
ELXZ250E□□152MK25S
15,000 18×35 0.016 0.032 3,680
ELXZ6R3E□□153MM35S
1,800 12.5×30 0.025 0.050 2,310
ELXZ250E□□182MK30S
18,000 18×40 0.015 0.030 3,800
ELXZ6R3E□□183MM40S
1,800 16×20 0.029 0.058 2,210
ELXZ250E□□182ML20S
10
100 5×11.5 0.50 1.0 175
ELXZ100E□□101MEB5D
2,200 12.5×35 0.022 0.044 2,510
ELXZ250E□□222MK35S
220 6.3×11.5 0.25 0.50 290
ELXZ100E□□221MFB5D
2,200 18×20 0.028 0.056 2,490
ELXZ250E□□222MM20S
330 6.3×15 0.18 0.36 400
ELXZ100E□□331MF15D
2,700 12.5×40 0.017 0.034 2,870
ELXZ250E□□272MK40S
470 8×12 0.12 0.24 555
ELXZ100E□□471MH12D
2,700 16×25 0.022 0.044 2,560
ELXZ250E□□272ML25S
680 8×15 0.090 0.18 730
ELXZ100E□□681MH15D
3,300 16×30 0.019 0.038 3,010
ELXZ250E□□332ML30S
680 10×12.5 0.090 0.18 760
ELXZ100E□□681MJC5S
3,300 18×25 0.020 0.040 2,740
ELXZ250E□□332MM25S
1,000 8×20 0.080 0.16 810
ELXZ100E□□102MH20D
3,900 16×35 0.017 0.034 3,150
ELXZ250E□□392ML35S
1,000 10×16 0.068 0.136 1,050
ELXZ100E□□102MJ16S
3,900 18×30 0.018 0.036 3,330
ELXZ250E□□392MM30S
1,200 10×20 0.052 0.104 1,220
ELXZ100E□□122MJ20S
4,700 16×40 0.015 0.030 3,710
ELXZ250E□□472ML40S
1,500 10×25 0.045 0.090 1,440
ELXZ100E□□152MJ25S
4,700 18×35 0.016 0.032 3,680
ELXZ250E□□472MM35S
1,800 10×30 0.037 0.074 1,690
ELXZ100E□□182MJ30S
5,600 18×40 0.015 0.030 3,800
ELXZ250E□□562MM40S
2,200 12.5×20 0.038 0.076 1,660
ELXZ100E□□222MK20S
35
33 5×11.5 0.50 1.0 175
ELXZ350E□□330MEB5D
3,300 12.5×25 0.030 0.060 1,950
ELXZ100E□□332MK25S
56 6.3×11.5 0.25 0.50 290
ELXZ350E□□560MFB5D
3,900 12.5×30 0.025 0.050 2,310
ELXZ100E□□392MK30S
100 6.3×15 0.18 0.36 400
ELXZ350E□□101MF15D
3,900 16×20 0.029 0.058 2,210
ELXZ100E□□392ML20S
150 8×12 0.12 0.24 555
ELXZ350E□□151MH12D
4,700 12.5×35 0.022 0.044 2,510
ELXZ100E□□472MK35S
220 8×15 0.090 0.18 730
ELXZ350E□□221MH15D
5,600 12.5×40 0.017 0.034 2,870
ELXZ100E□□562MK40S
220 10×12.5 0.090 0.18 760
ELXZ350E□□221MJC5S
5,600 16×25 0.022 0.044 2,560
ELXZ100E□□562ML25S
270 8×20 0.080 0.16 810
ELXZ350E□□271MH20D
5,600 18×20 0.028 0.056 2,490
ELXZ100E□□562MM20S
330 10×16 0.068 0.136 1,050
ELXZ350E□□331MJ16S
6,800 16×30 0.019 0.038 3,010
ELXZ100E□□682ML30S
470 10×20 0.052 0.104 1,220
ELXZ350E□□471MJ20S
6,800 18×25 0.020 0.040 2,740
ELXZ100E□□682MM25S
560 10×25 0.045 0.090 1,440
ELXZ350E□□561MJ25S
8,200 16×35 0.017 0.034 3,150
ELXZ100E□□822ML35S
680 10×30 0.037 0.074 1,690
ELXZ350E□□681MJ30S
8,200 18×30 0.018 0.036 3,330
ELXZ100E□□822MM30S
680 12.5×20 0.038 0.076 1,660
ELXZ350E□□681MK20S
10,000 16×40 0.015 0.030 3,710
ELXZ100E□□103ML40S
1,000 12.5×25 0.030 0.060 1,950
ELXZ350E□□102MK25S
10,000 18×35 0.016 0.032 3,680
ELXZ100E□□103MM35S
1,200 12.5×30 0.025 0.050 2,310
ELXZ350E□□122MK30S
12,000 18×40 0.015 0.030 3,800
ELXZ100E□□123MM40S
1,200 16×20 0.029 0.058 2,210
ELXZ350E□□122ML20S
16
47 5×11.5 0.50 1.0 175
ELXZ160E□□470MEB5D
1,500 12.5×35 0.022 0.044 2,510
ELXZ350E□□152MK35S
100 6.3×11.5 0.25 0.50 290
ELXZ160E□□101MFB5D
1,800 12.5×40 0.017 0.034 2,870
ELXZ350E□□182MK40S
220 6.3×15 0.18 0.36 400
ELXZ160E□□221MF15D
1,800 16×25 0.022 0.044 2,560
ELXZ350E□□182ML25S
330 8×12 0.12 0.24 555
ELXZ160E□□331MH12D
1,800 18×20 0.028 0.056 2,490
ELXZ350E□□182MM20S
470 8×15 0.090 0.18 730
ELXZ160E□□471MH15D
2,200 16×30 0.019 0.038 3,010
ELXZ350E□□222ML30S
470 10×12.5 0.090 0.18 760
ELXZ160E□□471MJC5S
2,200 18×25 0.020 0.040 2,740
ELXZ350E□□222MM25S
560 8×20 0.080 0.16 810
ELXZ160E□□561MH20D
2,700 16×35 0.017 0.034 3,150
ELXZ350E□□272ML35S
680 10×16 0.068 0.136 1,050
ELXZ160E□□681MJ16S
2,700 18×30 0.018 0.036 3,330
ELXZ350E□□272MM30S
1,000 10×20 0.052 0.104 1,220
ELXZ160E□□102MJ20S
3,300 16×40 0.015 0.030 3,710
ELXZ350E□□332ML40S
1,200 10×25 0.045 0.090 1,440
ELXZ160E□□122MJ25S
3,300 18×35 0.016 0.032 3,680
ELXZ350E□□332MM35S
1,500 10×30 0.037 0.074 1,690
ELXZ160E□□152MJ30S
3,900 18×40 0.015 0.030 3,800
ELXZ350E□□392MM40S
1,500 12.5×20 0.038 0.076 1,660
ELXZ160E□□152MK20S
50
22 5×11.5 0.90 1.8 155
ELXZ500E□□220MEB5D
2,200 12.5×25 0.030 0.060 1,950
ELXZ160E□□222MK25S
47 6.3×11.5 0.45 0.90 260
ELXZ500E□□470MFB5D
2,700 12.5×30 0.025 0.050 2,310
ELXZ160E□□272MK30S
68 6.3×15 0.31 0.62 360
ELXZ500E□□680MF15D
2,700 16×20 0.029 0.058 2,210
ELXZ160E□□272ML20S
100 8×12 0.22 0.44 485
ELXZ500E□□101MH12D
□□ : Enter the appropriate lead forming or taping code.
178 CAT. No. E1001Q
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, Downsized, 105℃
LXZSeries
◆STANDARD RATINGS
WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No. WV
(V
dc
)
Cap
(µF)
Case size
φD×L(mm)
Impedance
(Ω max./100kHz)
Rated
ripple
current
(mArms/
105℃,
100kHz)
Part No.
20℃-10℃20℃-10℃
50
120 8×15 0.16 0.32 635
ELXZ500E□□121MH15D
63
39 6.3×15 0.61 1.4 330
ELXZ630E□□390MF15D
120 10×12.5 0.16 0.32 620
ELXZ500E□□121MJC5S
68 8×12 0.34 0.75 405
ELXZ630E□□680MH12D
180 8×20 0.12 0.24 730
ELXZ500E□□181MH20D
100 8×15 0.27 0.65 535
ELXZ630E□□101MH15D
180 10×16 0.13 0.26 850
ELXZ500E□□181MJ16S
100 10×12.5 0.255 0.51 540
ELXZ630E□□101MJC5S
220 10×20 0.088 0.18 1,050
ELXZ500E□□221MJ20S
120 10×16 0.19 0.38 600
ELXZ630E□□121MJ16S
330 10×25 0.073 0.15 1,250
ELXZ500E□□331MJ25S
150 8×20 0.21 0.52 690
ELXZ630E□□151MH20D
390 10×30 0.054 0.11 1,500
ELXZ500E□□391MJ30S
180 10×20 0.145 0.29 890
ELXZ630E□□181MJ20S
390 12.5×20 0.059 0.12 1,480
ELXZ500E□□391MK20S
220 10×25 0.13 0.26 1,050
ELXZ630E□□221MJ25S
560 12.5×25 0.044 0.088 1,840
ELXZ500E□□561MK25S
330 10×30 0.090 0.18 1,300
ELXZ630E□□331MJ30S
680 12.5×30 0.039 0.078 2,220
ELXZ500E□□681MK30S
330 12.5×20 0.085 0.17 1,290
ELXZ630E□□331MK20S
680 16×20 0.048 0.096 1,840
ELXZ500E□□681ML20S
390 12.5×25 0.070 0.14 1,720
ELXZ630E□□391MK25S
820 12.5×35 0.033 0.066 2,290
ELXZ500E□□821MK35S
470 12.5×30 0.055 0.11 2,090
ELXZ630E□□471MK30S
820 18×20 0.042 0.084 1,980
ELXZ500E□□821MM20S
470 16×20 0.059 0.12 1,770
ELXZ630E□□471ML20S
1,000 12.5×40 0.029 0.058 2,500
ELXZ500E□□102MK40S
680 12.5×35 0.047 0.094 2,270
ELXZ630E□□681MK35S
1,000 16×25 0.034 0.068 2,240
ELXZ500E□□102ML25S
680 16×25 0.050 0.10 2,160
ELXZ630E□□681ML25S
1,200 16×30 0.028 0.056 2,700
ELXZ500E□□122ML30S
680 18×20 0.055 0.11 2,290
ELXZ630E□□681MM20S
1,200 18×25 0.029 0.058 2,610
ELXZ500E□□122MM25S
820 12.5×40 0.042 0.084 2,560
ELXZ630E□□821MK40S
1,500 16×35 0.025 0.050 2,800
ELXZ500E□□152ML35S
820 16×30 0.043 0.086 2,670
ELXZ630E□□821ML30S
1,800 16×40 0.021 0.042 3,200
ELXZ500E□□182ML40S
820 18×25 0.043 0.086 2,590
ELXZ630E□□821MM25S
1,800 18×30 0.025 0.050 3,000
ELXZ500E□□182MM30S
1,000 16×35 0.036 0.072 2,770
ELXZ630E□□102ML35S
2,200 18×35 0.023 0.046 3,100
ELXZ500E□□222MM35S
1,200 16×40 0.030 0.060 2,850
ELXZ630E□□122ML40S
2,700 18×40 0.020 0.040 3,400
ELXZ500E□□272MM40S
1,200 18×30 0.032 0.064 2,950
ELXZ630E□□122MM30S
63 12 5×11.5 1.9 4.0 145
ELXZ630E□□120MEB5D
1,500 18×35 0.030 0.060 3,100
ELXZ630E□□152MM35S
22 6.3×11.5 1.0 2.0 240
ELXZ630E□□220MFB5D
1,800 18×40 0.025 0.050 3,210
ELXZ630E□□182MM40S
□□ : Enter the appropriate lead forming or taping code.
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz)
Capacitance(µF)
120 1k 10k 100k
12 to 180 0.40 0.75 0.90 1.00
220 to 560 0.50 0.85 0.94 1.00
680 to 1,800 0.60 0.87 0.95 1.00
2,200 to 3,900 0.75 0.90 0.95 1.00
4,700 to 18,000 0.85 0.95 0.98 1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
179 CAT. No. E1001Q
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
