Supertex inc.
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
DN3135
Features
High input impedance
Low input capacitance
Fast switching speeds
Low on-resistance
Free from secondary breakdown
Low input and output leakage
Applications
Normally-on switches
Solid state relays
Converters
Linear amplifiers
Constant current sources
Power supply circuits
Telecom
►
►
►
►
►
►
►
►
►
►
►
►
►
General Description
The Supertex DN3135 is a low threshold depletion-mode
(normally-on) transistor utilizing an advanced vertical
DMOS structure and Supertex’s well-proven silicon-gate
manufacturing process. This combination produces a device
with the power handling capabilities of bipolar transistors
and with the high input impedance and positive temperature
coefficient inherent in MOS devices. Characteristic of all
MOS structures, this device is free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a
wide range of switching and amplifying applications where
high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
Absolute Maximum Ratings
Parameter Value
Drain-to-source voltage BVDSX
Drain-to-gate voltage BVDGX
Gate-to-source voltage ±20V
Operating and storage
temperature -55OC to +150OC
Soldering temperature* 300OC
Absolute Maximum Ratings are those values beyond which damage to the device
may occur. Functional operation under these conditions is not implied. Continuous
operation of the device at the absolute rating level may affect device reliability. All
voltages are referenced to device ground.
* Distance of 1.6mm from case for 10 seconds.
Ordering Information
Device
Package Options BVDSX/BVDGX
(V)
RDS(ON)
(max)
(Ω)
IDSS
(min)
(mA)
TO-236AB (SOT-23) TO-243AA (SOT-89)
DN3135 DN3135K1-G DN3135N8-G 350 35 180
-G indicates package is RoHS compliant (‘Green’)
N-Channel Depletion-Mode
Vertical DMOS FETs
Product Marking
DRAIN
SOURCE
GATE
GATE
SOURCE
DRAIN
DRAIN
TO-236AB (SOT-23) (K1) TO-243AA (SOT-89) (N8)
TO-236AB (SOT-23) (K1)
TO-243AA (SOT-89) (N8)
N1SW W = Code for week sealed
= “Green” Packaging
DN1SW W = Code for week sealed
= “Green” Packaging
Pin Configurations
Package may or may not include the following marks: Si or
Package may or may not include the following marks: Si or
2
DN3135
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
90%
10%
90% 90%
10%
10%
Pulse
Generator
VDD
RL
OUTPUT
D.U.T
.
t(ON)
td(ON)
t(OFF)
td(OFF) tf
tr
INPUT
INPUT
OUTPUT
0V
VDD
RGEN
0V
-10V
Electrical Characteristics (TA = 25OC unless otherwise specified)
Sym Parameter Min Typ Max Units Conditions
BVDSX Drain-to-source breakdown voltage 350 - - V VGS = -5.0V, ID = 100µA
VGS(OFF) Gate-to-source off voltage -1.5 - -3.5 V VDS = 15V, ID = 10µA
ΔVGS(OFF) Change in VGS(OFF) with temperature - - -4.5 mV/OC VDS = 15V, ID = 10µA
IGSS Gate body leakage current - - 100 nA VGS = ±20V, VDS = 0V
ID(OFF) Drain-to-source leakage current
- - 1.0 µA VDS = Max rating, VGS = -5.0V
- - 1.0 mA VDS = 0.8 Max Rating,
VGS = -5.0V, TA = 125OC
IDSS Saturated drain-to-source current 180 - - mA VGS = 0V, VDS = 15V
RDS(ON)
Static drain-to-source on-state
resistance - - 35 Ω VGS = 0V, ID = 150mA
ΔRDS(ON) Change in RDS(ON) with temperature - - 1.1 %/OC VGS = 0V, ID = 150mA
GFS Forward transconductance 140 - - mmho VDS = 10V, ID = 100mA
CISS Input capacitance - 60 120
pF
VGS = -5.0V,
VDS = 25V,
f = 1.0MHz
COSS Common source output capacitance - 6.0 15
CRSS Reverse transfer capacitance - 3.0 10
td(ON) Turn-on delay time - - 10
ns
VDD = 25V,
ID = 150mA,
RGEN = 25Ω,
VGS = 0v to -10V
trRise time - - 15
td(OFF) Turn-off delay time - - 15
tfFall time - - 20
VSD Diode forward voltage drop - - 1.8 V VGS = -5.0V, ISD = 150mA
trr Reverse recovery time - 800 - ns VGS = -5.0V, ISD = 150mA
Notes:
All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.)
All A.C. parameters sample tested.
1.
2.
Thermal Characteristics
Package
ID
(continuous)†
(mA)
ID
(pulsed)
(mA)
Power Dissipation
@TA = 25OC
(W)
θjc
(OC/W)
θja
(OC/W)
IDR
†
(mA)
IDRM
(mA)
TO-236AB 72 300 0.36 200 350 72 300
TO-243AA 135 300 1.3‡34 97‡135 300
Notes:
† ID (continuous) is limited by max rated Tj.
‡ Mounted on FR4 board, 25mm x 25mmx 1.57mm.
Switching Waveforms and Test Circuit
3
DN3135
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
3-Lead TO-236AB (SOT-23) Package Outline (K1)
2.90x1.30mm body, 1.12mm height (max), 1.90mm pitch
Symbol A A1 A2 b D E E1 e e1 L L1 θ
Dimension
(mm)
MIN 0.89 0.01 0.88 0.30 2.80 2.10 1.20 0.95
BSC
1.90
BSC
0.20†
0.54
REF
0O
NOM - - 0.95 - 2.90 - 1.30 0.50 -
MAX 1.12 0.10 1.02 0.50 3.04 2.64 1.40 0.60 8O
JEDEC Registration TO-236, Variation AB, Issue H, Jan. 1999.
† This dimension differs from the JEDEC drawing.
Drawings not to scale.
Supertex Doc.#: DSPD-3TO236ABK1, Version C041309.
View B
View A - A
Side View
Top View View B
Gauge
Plane
Seating
Plane
0.25
L1
L
E1 E
D
3
12
e
e1
b
A
A
Seating
Plane
AA2
A1
Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives
an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability
to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and
specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)
©2010 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Supertex inc.
1235 Bordeaux Drive, Sunnyvale, CA 94089
Tel: 408-222-8888
www.supertex.com
4
DN3135
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline
information go to http://www.supertex.com/packaging.html.)
Doc.# DSFP-DN3135
B051909
3-Lead TO-243AA (SOT-89) Package Outline (N8)
Symbol A b b1 C D D1 E E1 e e1 H L
Dimensions
(mm)
MIN 1.40 0.44 0.36 0.35 4.40 1.62 2.29 2.00†
1.50
BSC
3.00
BSC
3.94 0.89
NOM - - - - - - - - - -
MAX 1.60 0.56 0.48 0.44 4.60 1.83 2.60 2.29 4.25 1.20
JEDEC Registration TO-243, Variation AA, Issue C, July 1986.
† This dimension differs from the JEDEC drawing
Drawings not to scale.
Supertex Doc. #: DSPD-3TO243AAN8, Version E051509.
bb1
D
D1
EHE1
C
A
1 2 3
e
e1
Top View Side View
L