580 Pleasant St. Watertown, MA 02472 PH: (617) 926-0404 FAX: (617) 924-1235 UPS120E PRELIMINARY SURFACE MOUNT 1A SCHOTTKY RECTIFIER POWERMITE Power Surface Mount Package Features: * * * * * Low Profile -- Maximum Height of 1.1 mm Small Footprint -- Footprint Area of 8.45 mm2 Low VF Provides Higher Efficiency and Extends Battery Life Supplied in 12 mm Tape and Reel -- 12,000 Units per Reel Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES 20 VOLTS Mechanical Characteristics: * * * * * * * Powermite is JEDEC Registered as DO-216AA Case: Molded Epoxy Epoxy Meets UL94, VO at 1/8" Weight: 62 mg (appoximately) Device Marking: S20 Lead and Mounting Surface Temperature for Soldering Purposes, 260C Maximum for 10 Seconds Description: The UPS120E Powermite Schottky rectifier is designed to offer optimized reverse leakage characteristics for battery powered portable products such as cellular and cordless phones, chargers, notebook computers, printers, PDA's and PCMCIA cards. Typical applications include ac/dc and dc-dc converters, reverse battery protection and "Oring" of multiple supply voltages. The Powermite's patented heat sink design offers the same thermal performance rating as an SMA while being 50% smaller in footprint area and less than 1 mm in overall height. The result is a unique, highly efficient Schottky rectifier in a space saving surface mount package. Maximum Ratings RATING Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 130C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 KHz, TC = 135C Non-Repetitive Peak Surge Current (Non-Repetitive peak surge current, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR, TJ = 25C) SYMBOL VRRM VRWM VR IO VALUE 20 UNIT V 1.0 A IFRM 2.0 A IFSM 50 A Tstg, TC TJ dv/dt -55 to 150 -55 to 125 10,000 C C V/ s Rtjl Rtjtab Rtja 35 15 248 C/W Thermal Characteristics Thermal Resistance - Junction-to-Lead (Anode) (1) Thermal Resistance - Junction-to-Tab (Cathode) (1) Thermal Resistance - Junction-to-Ambient (1) (1) Pulse Test: Pulse Width 250 s, Duty Cycle 2%. MSC1360.PDF 02-16-99 UPS120E PRELIMINARY Electrical Characteristics Maximum Instantaneous Forward Voltage (1) (IF = 0.1 A) (IF = 1.0 A) (IF = 2.0 A) Maximum Instantaneous Reverse Current (VR = 20 V) (VR = 10 V) (VR = 5 V) VF IR (1) Pulse Test: Pulse Width 250 s, Duty Cycle 2%. MECHANICAL DIMENSIONS Figure 1 MSC1360.PDF 02-16-99 TJ = 25C 0.455 0.530 0.595 TJ = 25C 10 1.0 .5 TJ = 100C 0.360 0.455 0.540 TJ = 100C 1600 500 300 V A