Technical Data Sheet 1206 Package Chip LED (1.0mm Height) 15-21/T1D-CP1Q2TY/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipmen Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS complaint version. Descriptions The 15-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide PART No. 15-21/T1D-CP1Q2TY/2T Everlight Electronics Co., Ltd. Device No: DSE-000 Chip Material InGaN http://www.everlight.com Prepared date: 30-Jun-2011 Emitted Color Resin Color Pure White Yellow Diffused Rev 1 Page: 1 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Package Outline Dimensions 1.2 1.5 1.2 0.8 1.5 1.6 1.4 0.8 Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 2 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 45.0 ----- 112 mcd Viewing Angle 21/2 ----- 140 ----- deg Forward Voltage VF 2.60 ----- 3.00 V Reverse Current IR ----- ----- 50 A Condition IF=5mA VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 3 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Bin Range Of Luminous Intensity Bin Min Max P1 45.0 57.0 P2 57.0 72.0 Q1 72.0 90.0 Q2 90.0 112 Unit Condition mcd IF =5mA Bin Range Of Forward Voltage Group Bin Code Min. Max. 28 2.60 2.70 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 T Unit Condition V IF =5mA Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 4 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Chromaticity Coordinates Specifications for Bin Grading Groups Bin Code 1 2 C 3 4 CIE_x CIE_y Condition 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 IF= 5mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 5 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T CIE Chromaticity Diagram Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 6 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 7 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Label explanation CAT: Luminous Intensity Rank Pb EVERLIGHT HUE: Chromaticity Coordinates CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank XXXXXXXXXXXXX RoHS CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 8 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Desiccant Rev 1 Label Page: 9 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 10 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No: DSE-000 http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 11 of 12 Prepared by: ZhouChen 15-21/T1D-CP1Q2TY/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No: DSE-000 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 30-Jun-2011 Rev 1 Page: 12 of 12 Prepared by: ZhouChen Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: 15-21/T1D-CP1Q2TY/2T