122
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors
RADIAL LEADS, POLARIZED, STANDARD CASE SIZING
NRSA Series
CHARACTERISTICS
Note: Capacitors shall conform to JIS-C-5141, unless otherwise speci ed here.
NRSA NRSS
(today’s standard) (reduced sizes)
Rated Voltage Range 6.3 ~ 100Vdc
Capacitance Range 0.47 ~ 10,000μF
Operating Temperature Range -40 ~ +85°C
Capacitance Tolerance ±20%(M)
Max. Leakage Current @ +20°C After 1 min. 0.03CV or 4μA, whichever is greater
After 2 min. 0.01CV or 3μA, whichever is greater
Max. Tan δ @ 120Hz/+20°C
W.V. (Vdc) 6.3 10 16 25 35 50 63 100
S.V. (Vdc) 8 13 20 32 44 63 79 125
C < 1,000μF0.24 0.20 0.16 0.14 0.12 0.10 0.10 0.10
C = 2,200μF 0.24 0.21 0.18 0.16 0.14 0.12 0.11 -
C = 3,300μF 0.26 0.23 0.20 0.18 0.16 0.14 0.13 -
C = 4,700μF 0.28 0.25 0.22 0.20 0.18 0.20 - -
C = 6,800μF 0.32 0.29 0.26 0.24 ----
C = 10,000μF 0.40 0.37 0.34 0.32 ----
Low Temperature Stability
Inpedance Ratio @ 120Hz
Z-25°C/Z+20°C 43222222
Z-40°C/Z+20°C 10 8643333
Load Life Test at Rated W.V.
+85°C 2,000 Hours
Capacitance Change Within ±20% of initial measured value
Tan δLess than 200% of speci ed maximum value
Leakage Current Less than speci ed maximum value
Shelf Life Test
+85°C 1,000 Hours
No Load
Capacitance Change Within ±20% of initial measured value
Tan δLess than 200% of speci ed maximum value
Leakage Current Less than speci ed maximum value
STANDARD PRODUCTS AND CASE SIZE TABLE: D φ x L (mm)
Cap.
(μF) Code Working Voltage (Vdc)
6.3 10 16 25 35 50 63 100
0.47 R47 ------- 5x11
1.01R0-----5.11 - 5x11
2.22R2-----5x11 - 5x11
3.33R3-----5x11 - 5x11
4.74R7-----5x11 5x11 5x11
10 100 - - 5x11 - 5x11 5x11 5x11 6.3x11
22 220 - - 5x11 5x11 5x11 5x11 6.3x11 8x11.5
33 330 - - 5x11 5x11 5x11 6.3x11 6.3x11 10x12.5
47 470 - 5x11 5x11 5x11 6.3x11 6.3x11 8x11.5 10x16
100 101 - 5x11 6.3x11 6.3x11 8x11.5 8x11.5 10x12.5 12.5x20
150 151 - 5x11 6.3x11 8x11.5 8x11.5 10x12.5 10x16 12.5x20
220 221 - 6.3x11 8x11.5 8x11.5 10x12.5 10x16 10x20 16x25
330 331 6.3x11 8x11.5 8x11.5 10x12.5 10x16 10x20 12.5x20 16x25
470 471 8x11.5 8x11.5 10x12.5 10x16 10x20 12.5x20 12.5x25 16x31.5
680 681 10x12.5 - - - ----
1,000 102 10x12.5 10x16 10x20 12.5x20 12.5x25 16x25 16x31.5 -
1,500 152 10x20 12.5x20 12.5x25 12.5x25 16x25 -18x36 -
2,200 222 12.5x20 12.5x20 12.5x25 16x25 16x31.5 18x35.5 18x35.5 -
3,300 332 12.5x20 12.5x25 16x25 16x31.5 18x35.5 - - -
4,700 472 16x25 16x25 16x31.5 18x35.5 - - --
6,800 682 16x25 16x31 18x36 -----
10,000 103 16x31 18x36 ------
LEAD SPACING AND DIAMETER (mm)
Case Dia. (Dφ)5 6.3 8 10 12.5 16 18 22
Lead Dia (dφ)0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8
Lead Spacing (F) 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10
Dim. α0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0
β = L < 20mm = 1.5mm, L > 20mm = 2.0mm
*See Part Number System for Details
PNb
S
fD il
RoHS
Compliant
includes all homogeneous materials
DIMENSIONS (mm)
dφ ± 0.05
Insulation Sleeve
F ± 0.5
Dφ ± α
4mm
Min.
15mm Min.
L + β max.
Polarity Marking
Drawing is representative of parts as supplied in bulk or
straight lead format, please see taping speci cation for details
on taped format packaging.
-
+
123
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors NRSA Series
Part Number Cap.
(μF)
W.V.
(Vdc))
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+85°C/120Hz
Max. ESR (Ω)
+20°C/120Hz
Load Life Hours
@ +85°C
NRSA331M6.3V6.3x11F 330
6.3
0.24 240 1.11 2,000
NRSA471M6.3V8x11.5F 470 0.24 330 0.777 2,000
NRSA681M6.3V10x12.5F 680 0.24 460 0.526 2,000
NRSA102M6.3V10x12.5F 1,000 0.24 570 0.365 2,000
NRSA152M6.3V10x20F 1,500 0.24 790 0.243 2,000
NRSA222M6.3V12.5x20F 2,200 0.24 940 0.181 2,000
NRSA332M6.3V12.5x20F 3,300 0.26 1100 0.131 2,000
NRSA472M6.3V16x25F 4,700 0.28 1300 0.0988 2,000
NRSA682M6.3V16x25F 6,800 0.32 1600 0.0781 2,000
NRSA103M6.3V16x31F 10,000 0.40 1800 0.0663 2,000
NRSA470M10V5x11F 47
10
0.20 70 7.05 2,000
NRSA101M10V5x11F 100 0.20 130 3.16 2,000
NRSA151M10V5x11F 150 0.20 170 1.68 2,000
NRSA221M10V6.3x11F 220 0.20 210 1.44 2,000
NRSA331M10V8x11.5F 330 020 290 0.956 2,000
NRSA471M10V8x11.5F 470 0.20 350 0.671 2,000
NRSA102M10V10x16F 1,000 0.20 660 0.316 2,000
NRSA152M10V12.5x20F 1,500 0.20 870 0.210 2,000
NRSA222M10V12.5x20F 2,200 0.21 1000 0.159 2,000
NRSA332M10V12.5x25F 3,300 0.23 1200 0.116 2,000
NRSA472M10V16x25F 4,700 0.25 1500 0.0883 2,000
NRSA682M10V16x31F 6,800 0.29 1700 0.0708 2,000
NRSA103M10V18x36F 10,000 0.37 1900 0.0614 2,000
NRSA100M16V5x11F 10
16
0.16 28 26.5 2,000
NRSA220M16V5x11F 22 0.16 50 7.53 2,000
NRSA330M16V5x11F 33 0.16 80 8.05 2,000
NRSA470M16V5x11F 47 0.16 95 5.65 2,000
NRSA101M16V6.3x11F 100 0.16 160 2.66 2,000
NRSA151M16V6.3x11F 150 0.16 210 1.42 2,000
NRSA221M16V8x11.5F 220 0.16 260 1.21 2,000
NRSA331M16V8x11.5F 330 0.16 330 0.805 2,000
NRSA471M16V10x12.5F 470 0.16 440 0.565 2,000
NRSA102M16V10x20F 1,000 0.16 760 0.266 2,000
NRSA152M16V12.5x25F 1,500 0.16 1050 0.177 2,000
NRSA222M16V12.5x25F 2,200 0.18 1200 0.136 2,000
NRSA332M16V16x25F 3,300 0.20 1400 0.101 2,000
NRSA472M16V16x31.5F 4,700 0.22 1700 0.0777 2,000
NRSA682M16V18x36F 6,800 0.26 2000 0.0653 2,000
NRSA220M25V5x11F 22
25
0.14 70 10.6 2,000
NRSA330M25V5x11F 33 0.14 85 7.04 2,000
NRSA470M25V5x11F 47 0.14 100 4.94 2,000
NRSA101M25V6.3x11F 100 0.14 170 2.33 2,000
NRSA151M25V8x11.5F 150 0.14 220 1.24 2,000
NRSA221M25V8x11.5F 220 0.14 270 1.06 2,000
NRSA331M25V10x12.5F 330 0.14 400 0.704 2,000
NRSA471M25V10x16F 470 0.14 510 0.494 2,000
NRSA102M25V12.5x20F 1,000 0.14 900 0.233 2,000
NRSA152M25V12.5x25F 1,500 0.14 1100 0.155 2,000
NRSA222M25V16x25F 2,200 0.16 1300 0.121 2,000
NRSA332M25V16x31.5F 3,300 0.18 1600 0.0905 2,000
NRSA472M25V18x35.5F 4,700 0.20 1900 0.0706 2,000
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
124
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Part Number Cap.
(μF)
W.V.
(Vdc))
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+85°C/120Hz
Max. ESR (Ω)
+20°C/120Hz
Load Life Hours
@ +85°C
NRSA100M35V5x11F 10
35
0.12 50 19.9 2,000
NRSA220M35V5x11F 22 0.12 75 9.05 2,000
NRSA330M35V5x11F 33 0.12 95 6.04 2,000
NRSA470M35V6.3x11F 47 0.12 120 4.24 2,000
NRSA101M35V8x11.5F 100 0.12 210 1.99 2,000
NRSA151M35V8x11.5F 150 0.12 290 1.08 2,000
NRSA221M35V10x12.5F 220 0.12 370 0.905 2,000
NRSA331M35V10x16F 330 0.12 470 0.604 2,000
NRSA471M35V10x20F 470 0.12 600 0.424 2,000
NRSA102M35V12.5x25F 1,000 0.12 960 0.199 2,000
NRSA152M35V16x25F 1,500 0.12 1200 0.133 2,000
NRSA222M35V16x31.5F 2,200 0.14 1400 0.106 2,000
NRSA332M35V18x35.5F 3,300 0.16 1700 0.0805 2,000
NRSA1R0M50V5.11F 1.0
50
0.10 12 166 2,000
NRSA2R2M50V5x11F 2.2 0.10 20 75.4 2,000
NRSA3R3M50V5x11F 3.3 0.10 26 50.3 2,000
NRSA4R7M50V5x11F 4.7 0.10 33 35.3 2,000
NRSA100M50V5x11F 10 0.10 55 16.6 2,000
NRSA220M50V5x11F 22 0.10 85 7.54 2,000
NRSA330M50V6.3x11F 33 0.10 110 5.03 2,000
NRSA470M50V6.3x11F 47 0.10 140 3.53 2,000
NRSA101M50V8x11.5F 100 0.10 230 1.66 2,000
NRSA151M50V10x12.5F 150 0.10 330 0.88 2,000
NRSA221M50V10x16F 220 0.10 420 0.754 2,000
NRSA331M50V10x20F 330 0.10 580 0.503 2,000
NRSA471M50V12.5x20F 470 0.10 730 0.353 2,000
NRSA102M50V16x25F 1,000 0.10 1100 0.166 2,000
NRSA152M50V16x31F 1,500 0.10 1500 0.111 2,000
NRSA222M50V18x35.5F 2,200 0.12 1700 0.0905 2,000
NRSA4R7M63V5x11F 4.7
63
0.10 35 31.8 2,000
NRSA100M63V5x11F 10 0.10 60 15.0 2,000
NRSA220M63V6.3x11F 22 0.10 100 6.79 2,000
NRSA330M63V6.3x11F 33 0.10 140 4.53 2,000
NRSA470M63V8x11.5F 47 0.10 190 3.18 2,000
NRSA101M63V10x12.5F 100 0.10 300 1.50 2,000
NRSA151M63V10x16F 150 0.10 400 0.800 2,000
NRSA221M63V10x20F 220 0.10 490 0.679 2,000
NRSA331M63V12.5x20F 330 0.10 680 0.453 2,000
NRSA471M63V12.5x25F 470 0.10 880 0.318 2,000
NRSA102M63V16x31.5F 1,000 0.10 1300 0.150 2,000
NRSA152M63V18x36F 1,500 0.10 1600 0.099 2,000
NRSA222M63V18x35.5F 2,200 0.11 2200 0.083 2,000
Miniature Aluminum Electrolytic Capacitors NRSA Series
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
125
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
Frequency (Hz) 50 120 300 1K 10K
~ 47μF0.75 1.00 1.35 1.57 2.00
100 ~ 470μF0.80 1.00 1.23 1.34 1.50
1,000μF ~ 0.85 1.00 1.10 1.13 1.15
2,200 ~ 10,000μF0.85 1.00 1.03 1.05 1.08
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on
pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your speci c application - process
details with NIC’s technical support personnel: tpmg@niccomp.com
Part Number Cap.
(μF)
W.V.
(Vdc))
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+85°C/120Hz
Max. ESR (Ω)
+20°C/120Hz
Load Life Hours
@ +85°C
NRSAR47M100V5x11F 0.47
100
0.10 11 283 2,000
NRSA1R0M100V5x11F 1.0 0.10 15 133 2,000
NRSA2R2M100V5x11F 2.2 0.10 25 60.4 2,000
NRSA3R3M100V5x11F 3.3 0.10 35 40.3 2,000
NRSA4R7M100V5x11F 4.7 0.10 45 28.3 2,000
NRSA100M100V6.3x11F 10 0.10 70 13.3 2,000
NRSA220M100V8x11.5F 22 0.10 120 6.04 2,000
NRSA330M100V10x12.5F 33 0.10 170 4.03 2,000
NRSA470M100V10x16F 47 0.10 230 2.83 2,000
NRSA101M100V12.5x20F 100 0.10 370 1.33 2,000
NRSA151M100V12.5x20F 150 0.10 490 0.710 2,000
NRSA221M100V16x25F 220 0.10 600 0.604 2,000
NRSA331M100V16x25F 330 0.10 700 0.403 2,000
NRSA471M100V16x31.5F 470 0.10 930 0.283 2,000
Miniature Aluminum Electrolytic Capacitors NRSA Series
STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm)
PART NUMBERING SYSTEM
Size (D x L)
Tape and Box*
Series
Capacitance Code
Tolerance Code
Rated Voltage
RoHS Compliant
NRSA 470 M35V 6.3X11 TB F
*see taping speci cations for details
198 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors Taping Specifi cations
Taping Dimensions (mm)
Taping Dimensions (mm)
NOTE: ANODE (+) LEAD FEEDS OFF FIRST.
FOR OPTION OF NEGATIVE (
_) LEAD FIRST,
SPECIFY “TBN”.
STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB
Case Dia.
(Dφ)10 12.5
Case Size All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4*
P012.7 ±0.2
P13.85
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
*Optional Taping Specifi cations
10mm diameter available with P dim. = 12.7mm
(P/N Suffi x: TB12.7MMP)
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffi x: TB15MMP)
Case Dia.
(Dφ)4 5 6.3 8
Case Size 4x5
4x7 5x5
5x7 5x11 6.3x5
6.3x7 6.3x11 8x11.5
Dim.
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
F +0.8 ~ -0.2 5.0 -02 ~ +0.8
P 12.7 ±1.0
P012.7 ±0.2
P13.85 ±0.5 (at end of tape)
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
P2P
D
P1
w2
w0
w
0
P0
F
SD0
dWH
H0
1max
t
Δh
1max
t
Δh
P2P
D
P1
w2
w0
w
0
P0
F
SD0
dW1H
199
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Taping Dimensions (mm) SPECIAL STRAIGHT LEAD TAPING TBST
SPECIAL RADIAL TAPING (2.5mm LEAD SPACING, FORMED LEADS) TBF1
Case Dia.
(Dφ)4 5 6.3 8
Case Size 4x5
4x7 5x5
5x7 5x11 6.3x5
6.3x7 6.3x11 8x11.5
Dim.
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
F +0.8 ~ -0.2 2.0* 2.0 2.0 2.5 2.5 3.5
P ±1.0 12.7 ±0.2
P012.7 ±0.2
P15.1 5.1 5.1 5.1 5.1 4.6
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
* Parts with 4mm diameter are taped with a slight fl are in the
lead and a 2.0mm lead-space.
Miniature Aluminum Electrolytic Capacitors Taping Specifi cations
Case Dia.
(Dφ)45
Case Size 4x5
4x7 5x5
5x7 5x11
Dim.
dφ ±0.05 0.45 0.45 0.5
H ±0.75 17.5 17.5 18.5
H0 ±0.5 16.0 - -
F 2.5 -02 ~ +0.8
P 12.7 ±1.0
P012.7 ±0.2
P15.1 ±0.5
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 1.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0
t 0.7 ±0.2
Taping Dimensions (mm)
1max
t
Δh
P2P
D
P1
w2
w0
w
0
P0
F
SD0
dW1H
P2P
D
P1
w2
w0
w
0
P0
F
SD0
dWH
1max
t
Δh
H0
200 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors
RADIAL TAPED PACKAGING
Taping Specifi cations
Ammo Box (Tape & Box) TB, TBF1, TBST
Size of box and component quantity
*Special Taping Consult Factory For Availability
Ammo Box Dimensions (mm)
Scored corner
L
H
W
Label
-
Case Dia (Dφ)
or Case Size Q'ty per
Box
(pcs) Dim. L Dim. H Dim.
W
4x5, 4x7 2,000 331 175 43
5x5, 5x7 2,000 331 220 43
5x11 2,000 340 255 55
6.3x5, 6.3x7 2,000 331 280 43
6.3x11 2,000 331 280 48
8x11.5, 8x12.5 1,000 335 235 53
10x12.5* 500 335 190 53
10x16* 500 335 300 53
10x20* 500 335 300 55
12.x20* 500 335 300 55
12.5x25* 500 335 300 61