deburring system NOGA BURR 3 NG1003 Will do almost all of your deburring jobs. Includes: NG-1 handle, S10, S20 and S35 blades. NOGA BURR 5 NG1005 Same as NG1003 but with 2 extra blades. Suitable for coarse to extra fine deburring operations. Includes: NG-1 handle, S10, S20, S35, S101 and S202 blades. SUPER BURR NG3003 For heavy duty jobs. Includes: NG-3 handle, S holder, S100, S20 and S30 blades. HANDLES HOLDER NG-1 Handle NG1000 NogaGrip-1 holds all S blades (3.2mm). Spare blades are kept inside back cap. Designed for maximum comfort in your hand. 8 SIMPLY SOPHISTICATED NG-3 Handle NG3000 S Holder EL02003 NogaGrip-3 holds all blade holders. Spare blades are kept inside back cap. Designed for maximum comfort in your hand. Holds S blades (3.2mm). S holder telescopes from 30-115mm. Length: 131mm. Deep Holes Cross Holes Holes Straight Edge Curved Edge HEAVY DUTY o3.2mm EDGE OFF EO1000 Disposable tool. A handy pocket clip is a standard feature of this tool. Includes: S10 blade mounted in an 8mm painted hexagonal aluminum handle. RAPID BURR RB1000 Steel housing for long life of handle. Blade is replaceable. Holds 3.2mm blades. Includes: 12mm hexagonal aluminum painted handle and S 10 blade. All blades below are made of H.S.S.. Hardness 62-64Rc except S100 Cobalt 65-67Rc Incl. angle Pkg. weight Package (degrees) (grams) quantity BLADES Order No. S10 BS1010 40 31 10 steel, aluminum and plastic S10Tin BS1012 40 31 10 abrasive material S20 BS2010 60 33 10 brass and cast iron S20 Tin BS2012 60 33 10 stainless steel S30 BS3010 40 31 10 both int. and ext. burrs S35 BS3510 55 33 10 straight edges on most materials S60 BS6001 40 9 1 cross holes in difficult to reach places S100 Cobalt BS1018 45 32 10 plastic and hard materials S101 BK1010 40 29 10 fine edges on all materials S150 BK3010 45 27 10 holes as small as 1.5mm Dia. S202 BK2010 55 28 10 brass and cast iron fine edges L/R L/R L/R L/R Works best on L/R - for left and right hand users. SIMPLY SOPHISTICATED 9