Low VF SMD General Purpose Rectifiers
Glass Passivated Type
Reverse Voltage: 200 to 1000 Volts
Forward Current: 1.0 Amp
RoHS Device
Page 1
REV: A
Features
-Glass passivated cavity-free junction.
-Lead less chip form, no lead damage.
-Plastic package has Underwriters lammability
classification 94V-0.
-Low forward voltage drop.
Mechanical data
-Case: Packed with FRP substrate and epoxy underfilled.
-Terminals: Pure Tin plated, solderable per MIL-STD-750,
method 2026.
-Polarity: Cathode Band, Laser marking.
-Weight: 0.02 grams (approx).
ACGRAT101L-HF Thru. ACGRAT105L-HF
AQW-JG005
Notes: Thermal resistance from junction to ambient and from junction to lead P.C.B. monuted on 0.2×0.2”(5.0*5.0mm) copper pad areas.
Comchip Technology CO., LTD.
Absolute Maximum Ratings (at Ta=25°C unless otherwise noted)
ACGRAT
101L-HF
Repetitive peak reverse voltage
Peak forward surge current, 8.3ms
single half sine-wave superimposed
on rate load (JEDEC method)
Average forward current
Operating junction temperature
Storage temperature
ACGRAT
102L-HF ACGRAT
103L-HF ACGRAT
104L-HF ACGRAT
105L-HF UnitsSymbolParameter
VRRM
IFSM
IF(AV)
TJ
TSTG
200 400
40
1.0
-65 to +175
-65 to +175
600 V
A
A
°C
°C
800 1000
Company reserves the right to improve product design , functions and reliability without notice.
Repetitive peak reverse current
V
uA
Parameter Conditions
Forward voltage
Thermal Resistance
VR =Max. VRRM, TA=25°C
Junction to ambient (Note)
Symbol
IRRM
RθJA
CJ
MIN. TYP. MAX.
5
70
Unit
IF =1.0A 0.91 0.93
0.08
Junction capacitance VR=4V, f=1.0MHZ8.2 pF
Junction to lead (Note) RθJL 8°C/W
---
---
---
VF
---
---
---
---
---
Electrical Characteristics (at TA=25°C unless otherwise noted)
-Comply with AEC-Q101
Halogen Free
0.181(4.60)
0.173(4.40)
0.091(2.30)
0.083(2.10)
0.038(0.97)
0.037(0.93)
0.038(0.97)
0.037(0.93)
0.037(0.95)
0.039(0.98)
x0.020(x0.50)
2010/DO-214AC
Dimensions in inches and (millimeter)
Circuit Diagram
RATING AND CHARACTERISTIC CURVES (ACGRAT101L-HF thru ACGRAT105L-HF)
Comchip Technology CO., LTD.
Page 2
Company reserves the right to improve product design , functions and reliability without notice.
FIG.1 - FORWARD CURRENT DERATING CURVE
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
AVERAGE FORWARD RECTIFIED
CURRENT, (A)
1.00
1.50
0.75
0.50
0.25
IINSTANTANEOUS FORWARD CURRENT, (A)
0.10
1.00
10.00
0.01
0.2 0.4 0.6 0.8 1.0 1.2 1.4
00 25 50 75 100 125 150 175
LEAD TEMPERATURE, (°C)
INSTANTANEOUS FORWARD VOLTAGE, (V)
RESISTIVE OR
INDUCTIVE LOAD
60Hz
Low VF SMD General Purpose Rectifiers
AQW-JG005
REV: A
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT, (A)
NUMBER OF CYCLES AT 60Hz
0
10
50
40
20
1 10 100
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE LEAKAGE
CURRENT, (uA)
0.01
0
0.10
1.0
10
100
40 60 80 100
30
20
FIG.5 - TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE, (V)
0.1
JUNCTION CAPACITANCE, (pF)
200
1.0 10 100
10
100
1
Comchip Technology CO., LTD.
Page 3
Company reserves the right to improve product design , functions and reliability without notice.
Low VF SMD General Purpose Rectifiers
AQW-JG005
REV: A
B C dDD2
D1
E F P P0P1
SYMBOL
W W1
(mm)
(inch) 0.185 ± 0.004 0.094 ± 0.004 0.050 ± 0.004 0.059 ± 0.004 12.992 ± 0.079 1.969 MIN. 0.512 ± 0.020
SYMBOL
(mm)
(inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.567 MAX.
4.70 ± 0.10 2.40 ± 0.10
8.00 ± 0.10
1.50 ± 0.10
5.50 ± 0.051.75 ± 0.10
50.0 MIN. 13.0 ± 0.501.26 ± 0.10
4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 14.4 MAX.
330 ± 2.00
Reel Taping Specification
o
120
Trailer Device Leader
10 pitches (min)10 pitches (min)
.......
.......
....... ..............
....... ..............
End Start
D1
D
W1
T
C
Direction of Feed
Index hole
d
E
F
B W
P
P0
P1
A
A
D2
(DO-214AC)
2010
(DO-214AC)
2010
Comchip Technology CO., LTD.
Page 4
Company reserves the right to improve product design , functions and reliability without notice.
Low VF SMD General Purpose Rectifiers
AQW-JG005
REV: A
Standard Packaging
Case Type
3,000
REEL
( pcs )
Reel Size
(inch)
7
REEL PACK
2010/DO-214AC
Suggested PAD Layout
A
B
C
SIZE (inch)
0.058MIN.
(mm)
1.47MIN.
1.27MIN.
2.60MAX.
0.050MIN.
0.102MAX.
2010/DO-214AC
5.14REF. 0.202 REF.
A
B
C
DD
Marking Code
10D
Part Number Marking Code
ACGRAT101L-HF
ACGRAT102L-HF
ACGRAT103L-HF
10G
10J
ACGRAT104L-HF 10K
ACGRAT105L-HF 10M
XXX = Product type marking code
GC
.XXXL.
