Other Items FI Earth Leakage Circuit Breakers FI compact Earth Leakage Circuit Breakers detect and interrupt earth (ground) faults. They are VDE approved for the European system of protecting people, animals, equipment and proper ty from dangerous line-to-ground and shock hazard currents. US applications include groundfault protection of equipment (GFPE) using the 10mA and 30mA fault current ratings, especially when high distributed capacitance or other leakages cause excessive nuisance trips at lower fault currents. Applications for the 300mA rating are equipment protection and fire prevention, limiting the energy of a fault to less than the minimum ignition energy for many materials. Type Designation __ __ * __ (a) (b) (c) (a) = 2-2 pole; 4-4 pole (b) = 1-16A; 2-25A; 3-40A; 4-63A (c) = 01 - 10mA = 03 - 30mA = 30 - 300mA FI 2 FI 4a Maximum Rated Line Current Fault Trip Current Cat. No. 16A 10mA 15.921 25A 25A 30mA 300mA 40A 40A 30mA 300mA Fault Trip Current Cat. No. 15.922 15.924 30mA 300mA 15.926 15.929 15.923 15.925 30mA 300mA 15.927 15.930 63A 63A 30mA 300mA 15.928 15.931 Earth Leakage Circuit Breaker with Auxiliary Contactsb Earth Leakage Circuit Breaker with Auxiliary Contactsb 25A 40A 63A 30mA 30mA 15.932 15.934 30mA 30mA 30mA 15.933 15.935 15.936 Voltage Rating (maximum) 240VAC, 50/60Hz (VDE: 125/220VAC, 50Hz) 415VAC, 50/60Hz (400Hz available on request) (VDE: 220/380VAC, 50Hz) Short Circuit Capacity Up to rated current (RC) 40A = 1.5kA, RC 63A = 2kA. 10kA in combination with series fuse of European Operation Class gL/gG: RC 16A = 63A fuse, RC 25/40A = 80A fuse, RC 63A = 100A fuse. Fault Trip Current Calibration FI trips are calibrated at less than fault trip current for ensured safety (Typical trip range between 66.6-83.3% fault trip current, e.g., typical trip at 20-25mA for fault RC of 30mA) Typical Life Fully functional after 4,000 operations to DIN/VDE 0664 (CEE27) and 16000 additional fault current trips. Standard Pack and Weight 1/290g (0.64 lb.); 1/390g (0.86 lb.) with auxiliary contact 1/450g (1.0 lb.) 1/550g (1.21 lb.) with auxiliary contact Terminal Size Acceptability 16-6 AWG 14-3 AWG Equivalent Circuit 1 a For 2-Phase applications, terminal 5 N 1 3 5 Nc and 6 (next to Neutral terminals) must be connected to one phase for the test circuit to be operable. b Provided with mounted Auxiliary Switch, one N.O., one N.C. isolated feedthrough contact (Form X double make and Y double break), which adds 9mm (.35 in.) to the width dimension. c For voltage systems without a neutral conductor. Please use jumper from "1" or "3" to top "N" terminal. This will assure proper functioning of the "test" circuit. Note: If the power system has a marked conductor, it must connect through the FI and not be grounded at any point downstream. 78 2 N Test 2 4 6 N Test HFI11 - Auxiliary Switch Contact Rating 6A / 230V AC 1A / 220V DC or pulsed Std. Pk.: 1 Unit Weight: 45 grams (0.12 lb.) Width: 9mm (.354in.) Wire Size Type Cat. No. 4mm2 (12 AWG) HFI11 15.991 64mm (2.52 in.) 5 N N 85mm (3.35 in.) 2 6 4 46 N R1 2 36mm (1.42 in.) 3 1 72.5mm (2.85 in.) 72.5mm (2.85 in.) 36mm (1.42 in.) N 22.9mm (0.90 in.) R1 1 58mm (2.28 in.) R1 8mm (0.31 in.) 5.8mm (0.23 in.) 13.5mm 13.5mm 13.5mm (0.53 in.) (0.53 in.) (0.53 in.) 45.4mm (1.79in.) 88 10.9mm (0.43 in.) 18mm (0.71 in.) 9mm (0.35 in.) 9mm (0.35 in.) 18mm 18mm 18mm (0.71 in.) (0.71 in.) (0.71 in.) 3.2mm (0.13 in.) 15.7mm (0.62 in.) 6.5mm (0.26 in.) 31mm (1.22 in.) 45mm (1.77 in.) FI 2 FI 4 68mm (2.68 in.) FI 2 and FI 4 Temperature Range Environmental Information marked with "Snowflake" approval for -25C to 40C (-13F to 104F) ambient temperature. (Temperature effect on RC: for every 10C temperature rise above 40C decrease RC by 7%.) Fluctuating Climate Conditions To maximum 45C, 95% relative humidity. Electrical Shock Protection Uninsulated electrically live parts within 30mm of the operating handle are "finger safe" (terminal screw heads) and uninsulated live parts within 100mm of the operating handle are "back-of-hand safe" (terminals). Impact/Shock Protection 15g with impact force half-cycle sinusoidal and 11ms duration, 18 impacts total with 6 on each principal axis (3 impacts each face). FI is DIN Rail mounted during the test, and electrically loaded with 25% of Fault RC. Successful testing required no trip during the test, no damage and no loosened parts. Vibration/Seismic Resistance 5g, at frequency of 55Hz to 2,000Hz, applied for 35 5 minutes along each of the three principal axes, plus 5 minutes of application at every established critical resonant frequency. FI is DIN Rail mounted during the test, and loaded with 25% Fault RC. To pass, the FI did not trip at 25% Fault RC, but did trip between each of the principal axis tests when the fault current was raised to 125% Fault RC, and there was no damage and no loosened parts. Suitable for machinery and mobile vehicle applications. Housing Class Ingress Protection (IP) Class 40; internal working components and live parts (excluding terminals) are protected against ingress of solid objects greater than 1mm diameter (class 4-), but have no protection from ingress of water (class-0). Non-Sinusoidal Fault The FI is tested and approval stamped for tripping sensitivity to non-sinusoidal fault currents, which become zero or almost zero within one cycle of the line frequency. Waveforms and allowed trip-current ranges are as follows: 1. AC Sinusoidal Fault - 0.5-1.0 times Fault RC 2a. Pulsating DC Fault; Positive and Negative Half-Waves - 0.35-1.4 times Fault RC Phased Half-Wave, 90 - 0.25-1.4 times Fault RC Phased Half-Wave, 135 - 0.11-1.4 times Fault RC 2b. 3. Insulation Category Pulsating DC on 6mA DC (continuous) Base - Max. 1.4 times Fault RC + 6mA At VDE rated voltage, suitable for Class C environments with relatively high dust and moisture levels and little HVAC control, e.g., industrial, commercial, agricultural; on machine tools, hoists, warehouse equipment, etc.; in boiler rooms, unheated storage, covered shipping/receiving, open workshops, etc. Other Items 81mm (3.19 in.) 36mm (1.42 in.) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 79