TMR 3-1222WI. - TRACOPOWER

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TMR 3WI Series, 3 Watt

Features

◆ Highest power density in SIP package

◆ Ultra wide 4:1 input range

◆ Small footprint: 21.8 x 9.2 mm

◆ Temperature range –40° to +85°C

◆ High efﬁciency up to 81%

◆ Excellent load and line regulation

◆ Short-circuit protection

◆ I/O isolation 1500 VDC

◆ Remote On/Off control

◆ 3-year product warranty

The TMR-3WI series is a new family of isolated 3W DC/DC converters with regu-

lated output, featuring ultra-wide 4:1 input voltage range. The product comes in a

ultra-compact SIP plastic package with a small footprint occupying only 2.0 cm2

(0.3 square in.) of board space. An excellent efﬁciency allows –40° to +85°C

operation temperatures.

Further features include remote On/Off control and continuous short circuit protec-

tion. The very compact dimensions of these converters make them an ideal solution

for many space critical applications in battery-powered equipment and instrumen-

tation.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TMR 3-1210WI 3.3 VDC 700 mA 74 %

TMR 3-1211WI 5 VDC 600 mA 78 %

TMR 3-1212WI 12 VDC 250 mA 80 %

TMR 3-1213WI 4.5 – 18 VDC 15 VDC 200 mA 80 %

TMR 3-1221WI (12 VDC nominal) ±5 VDC ±300 mA 80 %

TMR 3-1222WI ±12 VDC ±125 mA 80 %

TMR 3-1223WI ±15 VDC ±100 mA 80 %

TMR 3-2410WI 3.3 VDC 700 mA 75 %

TMR 3-2411WI 5 VDC 600 mA 80 %

TMR 3-2412WI 12 VDC 250 mA 81 %

TMR 3-2413WI 9 – 36 VDC 15 VDC 200 mA 81 %

TMR 3-2421WI (24 VDC nominal) ±5 VDC ±300 mA 79 %

TMR 3-2422WI ±12 VDC ±125 mA 80 %

TMR 3-2423WI ±15 VDC ±100 mA 81 %

TMR 3-4810WI 3.3 VDC 700 mA 74 %

TMR 3-4811WI 5 VDC 600 mA 79 %

TMR 3-4812WI 12 VDC 250 mA 79 %

TMR 3-4813WI 18 – 75 VDC 15 VDC 200 mA 79 %

TMR 3-4821WI (48 VDC nominal) ±5 VDC ±300 mA 79 %

TMR 3-4822WI ±12 VDC ±125 mA 79 %

TMR 3-4823WI ±15 VDC ±100 mA 80 %

Models

pending

http://www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TMR 3WI Series 3 Watt

Input Specifications

Input current at full load 12 Vin models: 340 mA max.

24 Vin models: 170 mA max.

48 Vin models: 85 mA max.

Input current at no load 12 Vin models: 40 mA max.

24 Vin models: 25 mA typ.

48 Vin models: 15 mA typ.

Surge voltage (100 msec. max.) 12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Input filter inernal capacitor

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / Surge EN 61000-4-4, ± 2 kV, perf. criteria A

EN 61000-4-5, ± 1 kV perf. criteria A

With external input capacitor e.g. Nippon

chemi-con KY 100 µF, 100 V, ESR 110 mOhm

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Output Specifications

Voltage set accuracy ±1 % max

Regulation – Input variation Vin min. to Vin max. 0.2 % max.

– Load variation 0 – 100% single output models: 1.0 % max.

dual output models: 1.0 % max. balanced load

– Load cross regulation 25/100% 5.0 % max. (dual output models)

Minimum load not required

Temperature coefficient 0.02 %/K

Ripple and noise (20 MHz Bandwidth) 30 mVpk-pk max.

Start up time – Power On 30 ms typ.

(constant resistive load) – Remote On 30 ms typ.

Transient response setting time (25% load step change) 250 µs typ.

Short circuit protection continuous, automatic recovery

Capacitive load 3.3 VDC models: 1‘760 µF max.

5 VDC models: 1’000 µF max.

12 VDC models: 170 µF max.

15 VDC models: 110 µF max.

±5 VDC models: ±470 µF max.

±12 VDC models: ±100 µF max.

±15 VDC models: ±47 µF max.

General Specifications

Temperature ranges – Operating –40°C to +85°C

– Case temperature +100°C max.

– Storage –55°C to +125°C

Load derating 3.3 %/K above 70°C

Humidity (non condensing) 95 % rel. H max.

Reliability, calculated MTBF (MIL-HDBK-217F, @ 25°C, ground benign) >1.7 Mio h

Page 3 of 3

enatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com

DC/DC Converters

TMR 3WI Series 3 Watt

Outline Dimensions

Pin Single Dual

1–Vin (GND) –Vin (GND)

2+Vin (Vcc) +Vin (Vcc)

3Remote On/Off Remote On/Off

5No con. No con.

6+Vout +Vout

7–Vout Common

8No con. –Vout

Pin-Out

Rev. 09/10

General Specifications

Isolation voltage (60 sec) – Input/Output 1’500 VDC

Isolation capacity – Input/Output 200 pF max.

Isolation resistance – Input/Output (500 VDC) >1 GOhm

Switching frequency 100 kHz min. (PFM)

Remote On/Off – On: open or high impedance

– Off: 2...4 mA to applied via 1 kOhm resistor

– Off stand by input current 2.5 mA max.

Vibration and thermal shock MIL-STD-810E

Safety standards UL /cUL 60950-1, IEC/EN 60950-1

Safety approvals – UL/cUL pending

Environmental compliance – Reach www.tracopower.com/products/tmr3wi-reach.pdf

– RoHS RoHS Directive 2002/95/EC

Application notes www.tracopower.com/products/tmr3wi-application.pdf

Physical Specifications

Casing material non-conductive plastic

Potting material silicon, UL 94V-0 rated

Weight 4.8 g (0.17oz)

Speciﬁcations can be changed any time without notice.

Bottom view

3.2

(0.13)

0.5

(0.02)

0.25

(0.01)

2.54

2.0 2.54

21.8

5.08 2.54

0.5

(0.02)

11.1

(0.44)

(0.1) (0.1) (0.1)

(0.08 (0.2)

4.0

2.54

(0.1)

2.54

(0.1)

(0.86)

(0.16)

9.2

(0.36)

1235678

Dimensions in [mm], () = Inch

Pin dimension tolerances 0.1 (0.004)

Pin pitch tolerances: ±0.25 (±0.01)

Tolerances: ±0.5 (±0.02)