DC/DC Converters TMR 3WI Series, 3 Watt pending Features Highest power density in SIP package Ultra wide 4:1 input range Small footprint: 21.8 x 9.2 mm Temperature range -40 to +85C High efficiency up to 81% Excellent load and line regulation Short-circuit protection I/O isolation 1500 VDC Remote On/Off control 3-year product warranty The TMR-3WI series is a new family of isolated 3W DC/DC converters with regulated output, featuring ultra-wide 4:1 input voltage range. The product comes in a ultra-compact SIP plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows -40 to +85C operation temperatures. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in battery-powered equipment and instrumentation. Models Order code TMR 3-1210WI TMR 3-1211WI TMR 3-1212WI TMR 3-1213WI TMR 3-1221WI TMR 3-1222WI TMR 3-1223WI TMR 3-2410WI TMR 3-2411WI TMR 3-2412WI TMR 3-2413WI TMR 3-2421WI TMR 3-2422WI TMR 3-2423WI TMR 3-4810WI TMR 3-4811WI TMR 3-4812WI TMR 3-4813WI TMR 3-4821WI TMR 3-4822WI TMR 3-4823WI http://www.tracopower.com Input voltage 4.5 - 18 VDC (12 VDC nominal) 9 - 36 VDC (24 VDC nominal) 18 - 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 700 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA 700 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA 700 mA 600 mA 250 mA 200 mA 300 mA 125 mA 100 mA Efficiency typ. 74 % 78 % 80 % 80 % 80 % 80 % 80 % 75 % 80 % 81 % 81 % 79 % 80 % 81 % 74 % 79 % 79 % 79 % 79 % 79 % 80 % Page 1 of 3 DC/DC Converters TMR 3WI Series 3 Watt Input Specifications Input current at full load 12 Vin models: 340 mA max. 24 Vin models: 170 mA max. 48 Vin models: 85 mA max. Input current at no load 12 Vin models: 40 mA max. 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. Surge voltage (100 msec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input filter inernal capacitor ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 1 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 100 F, 100 V, ESR 110 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy 1 % max Regulation - Input variation Vin min. to Vin max. - Load variation 0 - 100% single output models: dual output models: - Load cross regulation 25/100% 0.2 % max. 1.0 % max. 1.0 % max. balanced load 5.0 % max. (dual output models) Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 30 mVpk-pk max. Start up time (constant resistive load) - Power On 30 ms typ. - Remote On 30 ms typ. Transient response setting time (25% load step change) 250 s typ. Short circuit protection continuous, automatic recovery Capacitive load 3.3 5 12 15 5 12 15 VDC VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: models: 1`760 F max. 1'000 F max. 170 F max. 110 F max. 470 F max. 100 F max. 47 F max. General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -55C to +125C Load derating 3.3 %/K above 70C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, @ 25C, ground benign) >1.7 Mio h All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TMR 3WI Series 3 Watt General Specifications Isolation voltage (60 sec) - Input/Output 1'500 VDC Isolation capacity - Input/Output 200 pF max. Isolation resistance - Input/Output (500 VDC) >1 GOhm Switching frequency 100 kHz min. (PFM) Remote On/Off - On: open or high impedance - Off: 2...4 mA to applied via 1 kOhm resistor - Off stand by input current 2.5 mA max. Vibration and thermal shock MIL-STD-810E Safety standards UL /cUL 60950-1, IEC/EN 60950-1 Safety approvals - UL/cUL pending Environmental compliance - Reach www.tracopower.com/products/tmr3wi-reach.pdf - RoHS RoHS Directive 2002/95/EC Application notes www.tracopower.com/products/tmr3wi-application.pdf Physical Specifications Casing material non-conductive plastic Potting material silicon, UL 94V-0 rated Weight 4.8 g (0.17oz) Outline Dimensions 3 5 6 7 8 (0.36) 2 3.2 (0.13) 1 9.2 Bottom view 0.25 (0.01) Pin-Out 2.0 2.54 2.54 5.08 (0.1) (0.2) (0.08 (0.1) 2.54 2.54 2.54 (0.1) 21.8 (0.1) Single Dual 1 -Vin (GND) -Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 Remote On/Off Remote On/Off 5 No con. No con. 6 +Vout +Vout 7 -Vout Common 8 No con. -Vout (0.1) (0.86) (0.16) 11.1 (0.44) 4.0 0.5 (0.02) 0.5 (0.02) Pin Dimensions in [mm], () = Inch Pin dimension tolerances 0.1 (0.004) Pin pitch tolerances: 0.25 (0.01) Tolerances: 0.5 (0.02) Specifications can be changed any time without notice. Rev. 09/10 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3