Publications and Reference: See Section 21
for a list of additional product-related publications
Prices and data subject to change without notice
www.geindustrial.com BuyLog Catalog 3-37
Rev. 12/04
Molded Case Circuit Breakers
3
MOLDED CASE
CIRCUIT BREAKERS
How to Order
Spectra RMS
—Circuit Breakers
Determine the required breaker frame, IC rating, and load
requirements. Select frame, trip unit (rating plug), and lug, if
required, product numbers from the tables on pages 3-48 to
3-58. For Spectra breakers with MicroVersaTrip Plus Trip Units
or MicroVersaTrip PM Trip Units refer to pages 3-59 through
3-61. Select field-mounted internal accessory product
numbers, if required, on pages 3-83 and 3-84. Select field-
mounted external accessory product numbers, if required, on
pages 3-92 through 3-104. Order as separate items.
—Mag-Break Motor Circuit Protectors
Determine the required frame and ampere requirements.
Select frame, trip unit (rating plug), and lug, if required,
product numbers from the table on pages 3-73 through 3-75.
Select accessories as noted above for circuit breakers. The
same accessories are used with both circuit breakers and
motor circuit protectors. Order as separate items.
—Molded Case Switches
Determine the required frame and ampere requirements.
Select frame and lug, if required, product numbers from
the table on page 3-72. Rating plugs are not used. Select
accessories as noted above for circuit breakers. Internal
accessories do not require dummy trips. The same accessories
are used with both circuit breakers and molded case switches.
Order as separate items.
Unless otherwise noted, all circuit breakers are UL listed in File
E–11592. Molded case switches are UL listed in File E–57546.
Field-Installable Internal Accessories are UL listed in File E–57253.
Distribution Cable Accessories for MicroVersaTrip Plus Trip Units
and MicroVersaTrip PM Trip Units are UL listed in File E–57253.
E 150 Line
—Thermal Magnetic Circuit Breakers
—Magnetic Circuit Breakers
—Molded Case Switches
The product numbers as shown in the following pages include the
complete breaker or switch. All devices listed come with Cu/Al line
and load lugs. If line lugs are not required on a breaker, eliminate
“WL” from product number; for molded case switches see page
3-38. Unless otherwise noted, all circuit breakers are UL listed in
File E–11592. Molded case switches are UL listed in File E–57546.
F 225 Line
—Thermal Magnetic Circuit Breakers
—Magnetic Circuit Breakers
—Molded Case Switches
These breakers are available with either noninterchangeable trips
(designated Type TFJ) or interchangeable trips (designated Types
TFK/THFK). When ordering Type TFJ, product number includes
complete breaker, trip unit, CU/Al line and load lugs factory
Industrial Circuit Breakers
Spectra RMS, Spectra RMS with MicroVersaTrip Plus Trip Units, Spectra RMS
with MicroVersaTrip PM Trip Units, Thermal Magnetic and J/K with MicroVersaTrip RMS-9
and Power+ 4 Trip Units
assembled. If line lugs are not required on a breaker, eliminate “WL”
from product number, and subtract price of line lugs from price of
complete breaker. If interchangeable trip (Types TFK/THFK) is
required order one of two ways. “Complete circuit breaker” price
includes frame, trip, Cu/Al line and load lugs. Units will be shipped
unassembled unless specified on order “must be factory assembled.”
If line lugs are not required on a breaker, eliminate “WL” from
product number, and subtract price of line lugs from price of com-
plete breaker. To order the frame, trip, and lugs separately, select the
required components from table. Magnetic breakers must be ordered
as components. A complete breaker consists of frame, trip unit, one
line lug per pole and one load lug per pole. Price of “Complete Circuit
Breaker” vs. ordering frame, trip, and line and load lugs separately
is the same.
Molded case switches can also be ordered as complete units
(designated TFK---Y) or as separate components. They are UL listed
only as complete units. To indicate required lugs, see page 3-38.
Unless otherwise noted, all circuit breakers are UL listed in File
E–11592. Molded case switches are UL listed in File E–57546.
J 600 Line
—Thermal Magnetic Circuit Breakers
—Magnetic Circuit Breakers
—Molded Case Switches
These breakers are available with either noninterchangeable trip
(designated Type TJJ) or interchangeable trip (designated Type TJK
and THJK). Type TJJ product numbers include frame, trip, Cu/Al line,
and load lugs factory assembled. If line lugs are not required on the
breaker, eliminate “WL” from product number, and subtract price of
line lugs from price of complete breaker.
TJK breakers are available in two frames, 400 ampere frame (125 to
400 amperes) and 600 ampere frame (250 to 600 amperes). Trip units
are not interchangeable between frames.
“Complete Circuit Breaker” price includes frame, trip unit, Cu/Al
line, and load lugs. Unit will be shipped unassembled unless order
specifies “must be factory assembled.” If line lugs are not required,
eliminate “WL” from product number and subtract price of line lugs
from price of complete breaker.
To order the frame, trip, and lugs separately, select the required
components from table. Magnetic breakers must be ordered as
components. A complete breaker consists of frame, trip, and one
line and one load lug per pole.
Price of ordering “Complete Circuit Breaker” vs. frame, trip, and
line and load lugs separately is the same.
Molded case switches can also be ordered as complete units
(designated Type TJK---Y) or as separate components. They are UL
listed only as complete units. To indicate required lugs, see
page 3-38.
Unless otherwise noted, all circuit breakers are UL listed in File
E–11592. Molded case switches are UL listed in File E–57546.