PP801 - Stanley Electric Co., Ltd.

Page 1

PP801

Through-hole PIN Photodiode/Wide Distribution Type

Recommended Applications

Electric Household Appliances, OA/FA, PC/Peripheral Equipment, Other General Applications

・Photo Current

: 190μA TYP. (VR

=12V,Ee=5mW/cm2)

・Wide Distribution

・Lead–free soldering compatible

・RoHS

compliant

Peak Sensitivity Wavelength 950nm

156 deg.

Product features

Die materials Si

Features

Package Concave Lenz type, Water clear epoxy

TTW (Through The Wave) soldering and manual soldering

※Please refer to Soldering Conditions about soldering.

Soldering methods

ESD 2kV (HBM)

Half Intensity Angle

2006.8.31

Page 2

2004.11.17

PP801

Through-hole PIN Photodiode/Wide Distribution Type

Absolute Maximum Ratings

Item Symbol Unit

Power Dissipation P

Reverse Voltage V

Operating Temperature T

opr

℃

Storage Temperature T

stg

℃

Electro-Optical Characteristics

Conditions

Photo Current V

=12V,

Ee=5mW/cm

2 ※1

Ip TYP. 190 μA

Response Time V

=12V,

=1,000Ωtr/tf TYP. 150 ns

Capacity V

=12V,

f=1MHz C

TYP. 35 pF

Dark Current V

=12V I

Max. 20 nA

Peak Sensitivity

Wavelength V

=0V λpTYP.950nm

Sensitivity V

=5V,

λ=950nm STYP.0.64A/W

Spatial Half Width V

=12V ⊿θ TYP. 156 deg.

※1 Color temperature is 2,856K. Employs a standard tungsten lamp.

-20~+70

Absolute Maximum Ratings

300

-20~+70

CharacteristicsItem UnitSymbol

(Ta=25℃)

Page 3

2004.11.17

PP801

Technical Data

Through-hole PIN Photodiode/Wide Distribution Type

Spatial Distribution Example

Condition : Ta = 25℃

Relative Sensitivity vs. Sensitivity Wavelength

Condition : Ta = 25℃, VR

= 12V

Sensitivity Wavelength

[nm]

Relative Sensitivity

Radiation Luminance vs. Relative Photo Current

Condition : Ta = 25℃, VR

= 12V

Radiation Luminance Ee(mW/cm2)

Relative Photo Current Ip

Reverse Voltage vs. Photo Current

Condition : Ta = 25℃, Ee

= 5mW/cm2

Reverse Voltage VR

(V)

Photo Current Ip (μA)

It is based on Ee=5mW/cm2.

Employs a standard tungsten lamp of 2,856K.

Page 4

PP801

Technical Data

Through-hole PIN Photodiode/Wide Distribution Type

Ambient Temperature vs. Relative Photo Current

Condition : VR

= 12V

Ambient Temperature : Ta(℃)

Reverse Voltage vs. Dark Current

Condition : Ta = 25℃

Reverse Voltage VR

(V)

Dark Current ID(A)

Ambient Temperature vs. Power Dissipation

Ambient Temperature : Ta(℃)

Ambient Temperature vs. Dark Current

Condition : VR

= 12V

Ambient Temperature : Ta(℃)

Dark Current : ID(A) Relative Photo Current Ip (mA)

Power Dissipation : Pd(mW)

2005.3.31

Page 5

2004.11.17

PP801

Technical Data

Through-hole PIN Photodiode/Wide Distribution Type

Reverse Voltage vs. Capacitance

Condition : Ta

= 25℃

Reverse Voltage : VR

(V)

Capacitance : CT(pF)

Package Dimensions

Page 6

(Unit: mm)

2004.11.17

PP801

Through-hole PIN Photodiode/Wide Distribution Type

PP801

Page 7

Through-hole PIN Photodiode/Wide Distribution Type

TTW (Through The Wave) soldering Conditions

Solder Bath Temp.

Dipping Time

265 ℃

5 s

(MAX.)

Position At least 3.0 mm away from the root of lead

Iron tip temp.

Soldering time and frequency 3 s

1 time

400 ℃

(MAX.)

(MAX.) (30 W Max.)

Position At least 3.0 mm away from the root of lead

2007.8.31

Pre-heating 100 ℃(MAX.) Resin surface temperature

1) The dip soldering process shall be twice maximum.

2) The product shall be cooled to normal temperature before the

second dipping process.

※The detail is described to LED and Photodetector handling precautions of home page:

"Mounting through-hole Type Devices“

and "Soldering", and use it after the confirmation, please.

Manual Soldering Conditions

※The detail is described to LED and Photodetector handling precautions of home page:

"Mounting through-hole Type Devices“

and "Soldering", and use it after the confirmation, please.

PP801

Page 8

Through-hole PIN Photodiode/Wide Distribution Type

Reliability Testing Result

Failure Criteria

Items Symbols Conditions Failure criteria

Photo Current I

Value of each product

Irradiance of Photo Current

Value of each product Reverse

Voltage of Photo Current

Testing Max. Value ≧Initial Value x 1.3

Testing Min. Value ≦ Initial Value x 0.7

Dark Current I

Value of each product Reverse

Voltage of Dark Current Testing Max. Value ≧ Spec. Max. Value x 1.2

Reliabilit y T esting

Result Applicable S tandard T est ing Conditions Duration F ailur e

Room Temp.

O per ating Lif e EIAJ ED-

4701/100(101) Ta = 25℃, Pd

= Maxium Rated Power Dissipation 1,000 h 0/16

R esi sta nce to

Solder ing Heat EIAJ ED-

4701/300(302) 265±5℃, 3mm from package base 5s 0/16

T emperature Cycling EIAJ ED-

4701/100(105)

Minimum Rated Storage Temperature(30min)

～Normal Temperature(15min)

～Maximum Rated Storage Temperature(30min)

～Normal Temperature(15min)

5 cycles 0/16

Wet High Temp.

Storage Life EIAJ ED-

4701/100(103) Ta = 60±2℃, RH = 90±5% 1,000 h 0/16

High T emp.

Storage Life EIAJ ED-

4701/200(201) Ta = Maximum Rated Storage Temperature 1,000 h 0/16

Low T emp.

Storage Life EIAJ ED-

4701/200(202) Ta = Minimum Rated Storage Temperature 1,000 h 0/16

Lead T ension EIAJ ED-

4701/400(401) 5N,1time 10s 0/16

Vibration,

Variable Frequency EIAJ ED-

4701/400(403)

98.1m/s

(10G), 100 ～ 2KHz sweep for 20min.,

XYZ each direction 2 h 0/16

2010.12.28

Special Notice to Customers Using the Products and

Technical Information Shown in This Data Sheet

PP801

Page 9

Through-hole PIN Photodiode/Wide Distribution Type

1) The technical information shown in the data sheets are limited to the typical characteristics and circuit

examples of the referenced products. It does not constitute the warranting of industrial property nor the

granting of any license.

2) For the purpose of product improvement, the specifications, characteristics and technical data described in

the data sheets are subject to change without prior notice.

Therefore it is recommended that the most

updated specifications be used in your design.

3) When using the products described in the data sheets, please

adhere to the maximum ratings for operating

voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any

damage which may occur if these specifications are exceeded.

4) The products that have been described to this catalog are manufactured so that they will be used for the

electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home

appliance and measuring instrument).

The application of aircrafts, space borne application, transportation equipment, medical equipment and

nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong

operation might influence the life or the human body. Please consult us beforehand if you plan to use our

product for the usages of aircrafts, space borne application, transportation equipment, medical equipment

and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV

machine, home appliance and measuring instrument.

5) In order to export the products or technologies described in

this data sheet which are under the

“Foreign Exchange and Foreign Trade Control Law,”

it is necessary to first obtain an export permit from the

Japanese government.

6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley

Electric Co., Ltd.

7) The most updated edition of this data sheet can be obtained from the address below:

http://www.stanley-components.com

2007.8.31