AC Line Filters Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Overview Applications The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two functions of normal mode countermeasure and common mode noise suppression in just one coil. Reducing the number of required products ensures cost savings and space efficiency. Our proprietary core materials provide optimized solutions for high-temperature requirements (standard type) or for high permeability needs (R type). In addition, the specially developed shape is efficient with normal noise suppression. * LED lighting * Audio-visual equipment * Office automation equipment * Power supplies Benefits * Proprietary 5HT and 10HZ ferrite materials and equivalents * Optimization of magnetic circuit and material * One coil to suppress both common and normal noise * High impedance in wide frequency range due to divided bobbin * High permeability for R type * Operating temperature range from -25C to +130C for standard type * Operating temperature range from -25C to +120C for R type * Low leakage magnetic flux to outside * UL94 V-0 flame retardant rated base and bobbin Part Number System SSHB 21 HS- R 03 1580 Series Core Size (mm) Core Orientation and Bobbin Type Core Type Rated Current AC (A) Inductance (mH) Minimum SSHB 21 = 21.0 mm HS- = Horizontal, bobbin with sectional winding structure Blank = Standard R = High permeability 0x = 0.x A xx = x.x A Examples: 03 = 0.3 A 13 = 1.3 A xxxx = xxx.x mH xxx = xx.x 0xx = x.x mH Examples: 1157 = 115.7 mH 596 = 59.6 mH 024 = 2.4 mH One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 1 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Magnetic Permeability of Ferrite Material In order to achieve efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET's proprietary ferrite material names. Other materials can also be available on request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range 20,000 Higher magnetic permeability: Higher noise suppression effect in the lower frequency range Mn-Zn Series Magnetic Permeability S18H S15H 10H 10,000 Lower magnetic permeability: Higher noise suppression effect in the higher frequency range 7H 5H Ni-Zn Series 0 10 kHz 1400L 700L 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 2 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Core Structure This original shape structure allows for optimized composite characteristics of common mode and normal mode noise countermeasures. Conventional Original New Core Shape Magnetic Flux Density Common Mode Normal Mode Increased efficiency on normal mode inductance Material solution for specific requirements Standard type for high temperature needs R type for high permeability needs Low leakage magnetic flux to outside Dimensions - Millimeters 23.0 Maximum 15.5 Maximum (15.0) N2 3.5 0.5 N1 26.0 Maximum (21.0) 21.0 0.5 0.8 15.0 0.5 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 3 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Environmental Compliance All KEMET AC Line Filters are RoHS Compliant. Table 1 - Ratings & Part Number Reference Part Number Rated Current AC (A) SSHB21HS-03656 SSHB21HS-04507 SSHB21HS-05440 SSHB21HS-06378 SSHB21HS-07267 SSHB21HS-08200 SSHB21HS-10145 SSHB21HS-12110 SSHB21HS-15064 SSHB21HS-18046 SSHB21HS-20034 SSHB21HS-25021 SSHB21HS-30013 SSHB21HS-R031350 SSHB21HS-R041050 SSHB21HS-R05910 SSHB21HS-R06780 SSHB21HS-R07550 SSHB21HS-R08410 SSHB21HS-R10300 SSHB21HS-R12220 SSHB21HS-R15130 SSHB21HS-R18095 SSHB21HS-R20071 SSHB21HS-R25044 SSHB21HS-R30028 0.3 0.4 0.5 0.6 0.7 0.8 1.0 1.2 1.5 1.8 2.0 2.5 3.0 0.3 0.4 0.5 0.6 0.7 0.8 1.0 1.2 1.5 1.8 2.0 2.5 3.0 Inductance Inductance DC Resistance/ Temperature Weight (g) (Common) (mH) (Normal) (H) Line () Rise (K) Marking Approximate Minimum Typical Maximum Maximum 65.6 50.7 44.0 37.8 26.7 20.0 14.5 11.0 6.4 4.6 3.4 2.1 1.3 135.0 105.0 91.0 78.0 55.0 41.0 30.0 22.0 13.0 9.5 7.1 4.4 2.8 1,832 1,341 1,230 1,023 665 515 384 290 180 129 96 60 38 1,832 1,341 1,230 1,023 665 515 384 290 180 129 96 60 38 2.95 2.03 1.88 1.48 1.03 0.78 0.57 0.43 0.28 0.20 0.14 0.09 0.06 2.95 2.03 1.88 1.48 1.03 0.78 0.57 0.43 0.28 0.20 0.14 0.09 0.06 40 40 55 60 55 55 65 65 65 65 55 50 45 40 40 55 60 55 55 65 65 65 65 55 50 45 03 Lot No. 04 Lot No. 05 Lot No. 06 Lot No. 07 Lot No. 08 Lot No. 10 Lot No. 12 Lot No. 15 Lot No. 18 Lot No. 20 Lot No. 25 Lot No. 30 Lot No. R03 Lot No. R04 Lot No. R05 Lot No. R06 Lot No. R07 Lot No. R08 Lot No. R10 Lot No. R12 Lot No. R15 Lot No. R18 Lot No. R20 Lot No. R25 Lot No. R30 Lot No. 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Performance Characteristics Item Performance Characteristics Rated Voltage 250 VAC Withstanding Voltage 2,400 VAC (2 seconds, between lines) Insulation Resistance > 100 M at 500 VDC (between lines) Rated Current AC Range 0.3 - 3.0 A Rated Inductance Range 1.3 - 135.0 mH minimum Inductance Measurement Condition 10 kHz Thermal Class E (120C) (R Type) and B (130C) Operating Temperature Range -25C to +120C (include self temperature rise) (R Type) and -25C to +130C (include self temperature rise) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 4 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Frequency Characteristics SSHB21HS (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 5 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Frequency Characteristics (cont'd) SSHB10HS-R (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 6 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Packaging Type Packaging Type Pieces Per Box SSHB21HS Tray 360 Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 70% relative humidity and atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid also storage near strong magnetic fields as this might magnetize the product. For optimized solderability, AC Line Filters' stock should be used promptly, preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. Check and evaluate the value of the core temperature rise under actual operating conditions when using. Export Control For customers in Japan For products that are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. For customers outside Japan AC Line Filters should not be used or sold for the use in the development, production, stockpiling or utilization of any conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons or missiles) or any other weapons. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 7 AC Line Filters - Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type KEMET Electronics Corporation Sales Offices Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales. Disclaimer Allproductspecifications,statements,informationanddata(collectively,the"Information")inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation's("KEMET")knowledgeoftypicaloperatingconditionsforsuch applications,butarenotintendedtoconstitute-andKEMETspecificallydisclaims-anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse. TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com LF0039_SSHB21HS * 3/4/2019 8