MGA-31189 0.25W High Gain Driver Amplifier 50 - 2000 MHz Data Sheet Description Features Avago Technologies MGA-31189 is a 0.25W high gain with good gain flatness Driver Amplifier MMIC, housed in a standard SOT-89 plastic package. The device features high linearity performance, excellent input and output return loss, and low noise figure. The device can be easily matched to obtain optimum power and linearity. ROHS compliant MGA-31189 is externally tunable to operate within 50MHz to 2GHz frequency range applications. With high IP3, low noise figure and wideband operation, the MGA-31189 can be utilized as a driver amplifier in the transmit chain and as a second stage LNA in the receive chain. Low noise figure This device uses Avago Technologies proprietary 0.25um GaAs Enhancement mode PHEMT process. Halogen free Very high linearity at low DC bias power [1] High Gain Good gain flatness Excellent uniformity in product specification SOT-89 standard package Specifications At 0.9GHz, Vdd = 5V, Idd = 111mA (typ) @ 25C OIP3 = 42dBm Pin connections and Package Marking Noise Figure = 2.0dB Gain = 21dB; Gain Flatness (+/-50MHz) = 0.1dB P1dB = 24 dBm 11X #1 #2 RFin GND Top View IRL = 15.6dB, ORL = 12.8dB #3 RFout #3 #2 RFout GND #1 RFin Note: 1. The MGA-31189 has a superior LFOM of 14.5dB. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC bias power. Vdd Bottom View C Notes: Top View : Package marking provides orientation and identification "11" = Device Code "X" = Date Code character identifies month of manufacturing Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 100 V ESD Human Body Model = 400 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. C L RFout RFin C Figure 1. Simplified Schematic diagram C MGA-31189 Absolute Maximum Rating[1] TA=25C Thermal Resistance Symbol Parameter Units Absolute Maximum Id,max Drain Current mA 150 Vd,max Device Voltage V 5.5 Pd Power Dissipation [2] mW 825 Pin,max CW RF Input Power dBm 25 Tj,max Junction Temperature C 150 Tstg Storage Temperature C -65 to 150 Thermal Resistance [3] (Vd = 5.0V, Tc = 85C) jc = 54.5C/W Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. Board temperature (Tc) is 25C, for Tc > 105C derate the device power at 18.3mW/C rise in board temperature adjacent to package bottom. 3. Thermal resistance measured using Infrared measurement technique. MGA-31189 Electrical Specifications [1] TA = 25C, Vd = 5V, unless noted Symbol Parameter and Test Condition Frequency Units Min. Typ. Max. Ids Quiescent current N/A mA 93 111 128 NF Noise Figure 0.45GHz 0.9GHz 1.5GHz dB - 2.7 2.0 1.8 2.6 0.45GHz 0.9GHz 1.5GHz dB 19 21 21 20 23 0.45GHz 0.9GHz 1.5GHz dBm 39.2 41.5 42 41.3 - 0.45GHz 0.9GHz 1.5GHz dBm 22.3 23.7 24 24.4 - 0.45GHz 0.9GHz 1.5GHz % - 42.7 42.5 44.3 - 0.45GHz 0.9GHz 1.5GHz dB - 22.9 15.6 15.9 - 0.45GHz 0.9GHz 1.5GHz dB - 10 12.8 16 - 0.45GHz 0.9GHz 1.5GHz dB - 27.9 27.6 27.5 - Gain OIP3 [2] P1dB PAE IRL ORL ISOL Gain Output Third Order Intercept Point Output Power at 1dB Gain Compression Power Added Efficiency at P1dB Input Return Loss Output Return Loss Isolation Notes: 1. Typical performance obtained from a test circuit described in Figure 34. 2. OIP3 test condition: F1 - F2 = 10MHz, with input power of -12dBm per tone measured at worst case side band. 2 MGA-31189 Consistency Distribution Chart (1, 2) 100 110 120 130 Figure 2. Idd @ 900MHz, Vdd = 5V, LSL=93mA, Nominal=111mA, USL=128mA 18 19 20 21 22 23 24 25 Figure 4. Gain @ 900MHz, Vdd = 5V, LSL=19dB, Nominal=21dB, USL=23dB 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 Figure 3. NF @ 900MHz, Vdd = 5V, Nominal=2dB, USL=2.6dB 39 40 41 42 43 44 45 Figure 5. OIP3 @ 900MHz, Vdd = 5V, LSL=39.2dBm, Nominal=42dBm Notes: 1. Data sample size is 3500 samples taken from 4 different wafers and 2 different lots. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 2. Measurements are made on production test board which represents a trade-off between optimal Gain, NF, OIP3 and OP1dB. Circuit losses have been de-embedded from actual measurements. 22 23 24 25 26 Figure 6. P1dB @ 900MHz, Vdd = 5V, LSL=22.3dBm, Nominal=24dBm 3 MGA-31189 Application Circuit Data for 450MHz TA = 25C, Vd = 5.0V, Id = 111mA 52 25.0 85C 25C -40C 50 24.0 46 P1dB (dBm) OIP3 (dBm) 48 24.5 44 42 38 21.5 350 450 550 Frequency (MHz) 650 750 150 250 350 450 550 Frequency (MHz) 650 750 Figure 8. P1dB vs Frequency and Temperature 22 0 20 -5 -10 IRL (dB) 16 14 150 250 350 450 550 Frequency (MHz) 650 -20 85C 25C -40C -30 -35 750 Figure 9. Gain vs Frequency and Temperature 150 250 350 450 550 Frequency (MHz) 650 750 Figure 10. IRL vs Frequency and Temperature -26 0 85C 25C -40C -5 -28 Isolation (dB) -10 -15 -20 -30 -32 -34 85C 25C -40C -36 -25 -30 -15 -25 85C 25C -40C 12 10 85C 25C -40C 21.0 250 18 Gain (dB) 22.5 22.0 Figure 7. OIP3 vs Frequency and Temperature ORL (dB) 23.0 40 36 150 150 250 350 450 550 Frequency (MHz) Figure 11. ORL vs Frequency and Temperature 4 23.5 650 750 -38 150 250 350 450 550 Frequency (MHz) Figure 12. Isolation vs Frequency and Temperature 650 750 MGA-31189 Application Circuit Data for 450MHz (continue) 10 85C 25C -40C 9 8 OIP3 (dBm) NF (dB) 7 6 5 4 3 2 1 150 250 350 450 550 Frequency (MHz) 650 750 Figure 13. Noise Figure vs Frequency and Temperature 120 Idd (mA) 100 80 60 85C 25C -40C 20 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vdd (V) Figure 15. Current vs Voltage and Temperature 5 85C 25C -40C 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 Pout (dBm) Figure 14. OIP3 vs Output Power and Temperature at 450MHz 140 40 46 44 42 40 38 36 34 32 30 28 26 MGA-31189 Application Circuit Data for 900MHz TA = 25C, Vd = 5.0V, Id = 111mA 25.0 54 85C 25C -40C 52 24.5 48 P1dB (dBm) OIP3 (dBm) 50 46 44 42 40 23.5 23.0 85C 25C -40C 22.5 38 22.0 600 36 600 700 800 900 1000 Frequency (MHz) 1100 1200 Figure 16. OIP3 vs Frequency and Temperature 800 900 1000 Frequency (MHz) 1100 1200 -10 85C 25C -40C 21.5 85C 25C -40C -12 21.0 IRL (dB) -14 20.5 -16 20.0 -18 19.5 -20 19.0 600 700 Figure 17. P1dB vs Frequency and Temperature 22.0 Gain (dB) 24.0 -22 700 800 900 1000 Frequency (MHz) 1100 600 1200 Figure 18. Gain vs Frequency and Temperature 700 800 900 1000 Frequency (MHz) 1100 1200 Figure 19. IRL vs Frequency and Temperature -26.0 -5 -26.5 -10 -27.0 Isolation (dB) ORL (dB) -15 -20 -25 -30 -35 600 -28.5 85C 25C -40C -29.5 800 900 1000 Frequency (MHz) Figure 20. ORL vs Frequency and Temperature 6 -28.0 -29.0 85C 25C -40C 700 -27.5 1100 1200 -30.0 600 700 800 900 1000 Frequency (MHz) Figure 21. Isolation vs Frequency and Temperature 1100 1200 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 600 85C 25C -40C OIP3 (dBm) NF (dB) MGA-31189 Application Circuit Data for 900MHz (continue) 700 800 900 1000 Frequency (MHz) 1100 1200 Figure 22. Noise Figure vs Frequency and Temperature 120 Idd (mA) 100 80 60 85C 25C -40C 20 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vdd (V) Figure 24. Current vs Voltage and Temperature 7 85C 25C -40C 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 Pout (dBm) Figure 23. OIP3 vs Output Power and Temperature at 900MHz 140 40 48 46 44 42 40 38 36 34 32 30 28 MGA-31189 Application Circuit Data for 1500MHz TA = 25C, Vd = 5.0V, Id = 111mA 46 25.0 44 24.5 P1dB (dBm) OIP3 (dBm) 42 40 38 36 85C 25C -40C 34 32 1200 1300 1400 1500 1600 Frequency (MHz) 1700 23.0 22.0 1200 1800 1300 1400 1500 1600 Frequency (MHz) 1700 1800 -10 85C 25C -40C 20.5 -12 -14 IRL (dB) 20.0 19.5 -16 19.0 -18 18.5 -20 18.0 1200 85C 25C -40C Figure 26. P1dB vs Frequency and Temperature 21.0 Gain (dB) 23.5 22.5 Figure 25. OIP3 vs Frequency and Temperature 1300 1400 1500 1600 Frequency (MHz) 1700 -22 1200 1800 Figure 27. Gain vs Frequency and Temperature 85C 25C -40C 1300 1400 1500 1600 Frequency (MHz) 1700 1800 Figure 28. IRL vs Frequency and Temperature -5 -26.0 85C 25C -40C 85C 25C -40C -26.5 -27.0 Isolation (dB) -10 ORL (dB) 24.0 -15 -20 -27.5 -28.0 -28.5 -29.0 -25 -29.5 -30 1200 1300 1400 1500 1600 Frequency (MHz) Figure 29. ORL vs Frequency and Temperature 8 1700 1800 -30.0 1200 1300 1400 1500 1600 Frequency (MHz) Figure 30. Isolation vs Frequency and Temperature 1700 1800 MGA-31189 Application Circuit Data for 1500MHz (continue) 3.0 44 2.5 42 40 OIP3 (dBm) NF (dB) 2.0 1.5 1.0 0.0 1200 1300 1400 1500 1600 Frequency (MHz) 1700 32 1800 Figure 31. Noise Figure vs Frequency and Temperature 120 Idd (mA) 100 80 60 85C 25C -40C 20 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Vdd (V) Figure 33. Current vs Voltage and Temperature 9 85C 25C -40C 30 -2.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 Pout (dBm) Figure 32. OIP3 vs Output Power and Temperature at 1500MHz 140 40 36 34 85C 25C -40C 0.5 38 VDD C12 2.2UF/15V 0805 C11 C10 C2 C1 CTxx SOT-89 REV 3.2 Jul 2009 Figure 34. Circuit diagram L4 2.2UF/15V 0805 VDD C8 C9 L2 VSENSE C7 GND L3 C9 AVAGO TECHNOLOGIES RFout C4 C5 C6 GND L3 L1 OUT L1 C8 C7 11X C3 C2 IN RFin GND GND 2.2UF/15V 0805 C3 VSENSE GND Vdd VCTRL Application Circuit Description and Layout Figure 35. Demoboard Bill of Materials Description For 0.45GHz(1) For 0.9GHz(2) For 1.5GHz(3) Circuit Symbol Size Value Manufacturer Value Manufacturer Value Manufacturer C2 0402 0.1F Murata 0.1F Murata 0.1F Murata C3 0603 2.2F Murata 2.2F Murata 2.2F Murata C7 0402 18pF Murata 100pF Murata 100pF Murata C8 0402 82pF Murata 39pF Murata 100pF Murata C9 0402 5.6pF Murata NA NA NA NA L1 0402 56nH Coilcraft 39nH Murata 12nH Murata L3 0402 18nH Coilcraft NA NA NA NA Note: NA - not required in actual PCB design DCin Input Matching Circuit RFin 1. _mag = 0.303, _ang = -163.74 2. _mag = 0.071, _ang = -113.02 3. _mag = 0.106, _ang = -128.48 Output Matching Circuit 11X 1. _mag = 0.063, _ang = 96.75 2. _mag = 0.039, _ang = -134.54 3. _mag = 0.062, _ang = 128.17 RFout Figure 36. Input and output tuned Gamma location for 450MHz(1) , 900MHz(2) and 1.5GHz(3) MGA-31189 is an input and output prematched component. To bias MGA-31189, a +5V supply (Vdd) is connected to the output pin thru a RF choke, L1 (which isolates the inband signal from the DC supply). The bypass capacitors, C3 and C2 help to eliminate out of low band frequency signals from the power supply. Blocking capacitors are required for its input (C7) and output (C8), to isolate the supply voltage from succeeding circuits. To improve on input match at 450MHz, L3 and C9 are added. The L1, together with C8 also act as the output tuning circuitry. The recommended output tuning is for achieving best OIP3, while meeting typical specifications for other parameters. 10 MGA-31189 Typical Scatter Parameters(1) TA = 25C, Vd = 5.0V, Id = 111mA, Zo = 50 Freq GHz S11 S11 S11 S21 S21 S21 S12 S12 S12 S22 S22 S22 Mag. Ang. dB Mag. Ang. dB Mag. Ang. dB Mag. Ang. dB 0.05 0.229 -146.8 -12.8 12.340 163.1 21.8 0.040 5.0 -28.0 0.499 -172.1 -6.0 1.041 0.10 0.217 -161.0 -13.3 11.850 163.6 21.5 0.040 0.0 -27.9 0.494 178.8 -6.1 1.081 0.20 0.217 -172.7 -13.3 11.590 158.1 21.3 0.041 -6.2 -27.8 0.483 167.7 -6.3 1.104 0.30 0.221 -179.8 -13.1 11.480 150.5 21.2 0.041 -11.5 -27.7 0.465 159.1 -6.7 1.122 0.40 0.225 173.9 -13.0 11.390 142.3 21.1 0.041 -16.7 -27.7 0.438 151.7 -7.2 1.142 0.50 0.226 167.0 -12.9 11.300 133.9 21.1 0.042 -21.9 -27.6 0.406 145.2 -7.8 1.163 0.60 0.223 158.5 -13.1 11.210 125.2 21.0 0.042 -27.3 -27.5 0.370 139.3 -8.6 1.185 0.70 0.218 148.4 -13.2 11.100 116.4 20.9 0.042 -32.8 -27.5 0.335 134.8 -9.5 1.205 0.80 0.214 136.1 -13.4 10.980 107.5 20.8 0.042 -38.6 -27.5 0.303 132.1 -10.4 1.224 0.90 0.213 121.8 -13.4 10.840 98.4 20.7 0.042 -44.7 -27.4 0.279 131.1 -11.1 1.242 1.00 0.218 106.2 -13.2 10.670 89.2 20.6 0.042 -51.1 -27.5 0.263 130.9 -11.6 1.259 1.10 0.224 91.9 -13.0 10.480 80.4 20.4 0.042 -57.5 -27.5 0.251 128.3 -12.0 1.277 1.20 0.231 79.0 -12.7 10.310 71.3 20.3 0.042 -63.8 -27.5 0.240 125.9 -12.4 1.294 1.30 0.241 65.7 -12.4 10.120 62.1 20.1 0.042 -70.1 -27.5 0.230 123.6 -12.8 1.314 1.40 0.251 52.2 -12.0 9.912 52.7 19.9 0.042 -76.7 -27.6 0.221 121.5 -13.1 1.338 1.50 0.262 38.3 -11.6 9.675 43.3 19.7 0.041 -83.4 -27.7 0.212 119.3 -13.5 1.367 1.60 0.275 24.2 -11.2 9.412 33.9 19.5 0.041 -90.2 -27.8 0.205 117.1 -13.8 1.402 1.70 0.290 9.9 -10.8 9.125 24.5 19.2 0.040 -97.2 -28.0 0.198 114.6 -14.1 1.445 1.80 0.306 -4.6 -10.3 8.815 15.0 18.9 0.039 -104.3 -28.2 0.193 112.0 -14.3 1.496 1.90 0.324 -19.0 -9.8 8.486 5.6 18.6 0.038 -111.5 -28.4 0.187 109.1 -14.5 1.557 2.00 0.344 -33.4 -9.3 8.139 -3.7 18.2 0.037 -118.7 -28.6 0.183 105.9 -14.7 1.628 2.10 0.367 -47.6 -8.7 7.776 -13.0 17.8 0.036 -126.1 -28.9 0.180 102.3 -14.9 1.710 2.20 0.392 -61.4 -8.1 7.403 -22.2 17.4 0.034 -133.4 -29.3 0.178 98.2 -15.0 1.803 2.30 0.421 -74.9 -7.5 7.023 -31.3 16.9 0.033 -140.8 -29.6 0.177 93.4 -15.1 1.906 2.40 0.453 -87.9 -6.9 6.641 -40.3 16.5 0.032 -148.1 -30.0 0.177 88.0 -15.1 2.017 2.50 0.488 -100.3 -6.2 6.260 -49.2 15.9 0.030 -155.4 -30.4 0.178 81.8 -15.0 2.133 3.00 0.687 -150.3 -3.3 4.472 -91.1 13.0 0.023 169.3 -32.7 0.199 39.7 -14.0 2.647 3.50 0.822 174.9 -1.7 3.082 -128.3 9.8 0.018 138.1 -35.1 0.227 -11.2 -12.9 3.025 4.00 0.882 147.5 -1.1 2.138 -161.5 6.6 0.014 111.6 -36.8 0.278 -60.5 -11.1 3.496 5.00 0.910 101.5 -0.8 1.070 137.8 0.6 0.013 66.7 -37.6 0.467 -136.9 -6.6 4.963 6.00 0.918 58.3 -0.7 0.524 80.9 -5.6 0.014 24.3 -36.8 0.580 164.0 -4.7 7.125 7.00 0.931 21.3 -0.6 0.258 31.9 -11.8 0.014 -13.9 -36.8 0.576 114.2 -4.8 12.313 8.00 0.935 -8.9 -0.6 0.141 -10.4 -17.0 0.013 -44.6 -37.6 0.569 74.3 -4.9 23.268 9.00 0.933 -39.5 -0.6 0.085 -52.0 -21.4 0.011 -71.9 -39.2 0.594 39.7 -4.5 45.258 10.00 0.936 -69.1 -0.6 0.051 -93.7 -25.8 0.008 -96.5 -42.2 0.650 4.1 -3.7 89.931 11.00 0.946 -92.3 -0.5 0.029 -133.1 -30.9 0.004 -103.3 -48.2 0.728 -31.5 -2.8 223.521 12.00 0.954 -108.5 -0.4 0.014 -171.3 -37.1 0.003 -67.6 -51.5 0.799 -61.5 -1.9 434.262 13.00 0.957 -121.0 -0.4 0.007 132.0 -43.7 0.004 -35.1 -48.0 0.844 -86.3 -1.5 466.907 14.00 0.951 -134.7 -0.4 0.005 50.6 -45.3 0.007 -45.1 -43.6 0.866 -110.5 -1.2 332.034 15.00 0.943 -151.9 -0.5 0.008 -23.8 -42.4 0.008 -69.8 -42.4 0.867 -133.5 -1.2 242.204 16.00 0.939 -170.3 -0.5 0.007 -70.9 -43.6 0.005 -92.2 -45.4 0.857 -150.2 -1.3 439.706 17.00 0.943 173.0 -0.5 0.004 -72.5 -47.5 0.003 -78.5 -49.2 0.851 -161.6 -1.4 1046.765 18.00 0.948 159.6 -0.5 0.004 -44.6 -47.7 0.004 -44.6 -48.6 0.835 -174.5 -1.6 994.693 19.00 0.946 149.4 -0.5 0.006 -29.9 -44.5 0.006 -29.4 -45.1 0.813 167.6 -1.8 534.995 20.00 0.931 139.6 -0.6 0.008 -21.8 -41.5 0.008 -18.3 -41.9 0.803 147.2 -1.9 352.978 11 K MGA-31189 K-Factor (1) TA = 25C, Vd = 5.0V, Id = 111mA, Zo = 50 K 10 9 8 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 freq, GHz 14 16 18 20 MGA-31189 Typical Noise Parameters (1) TA = 25C, Vd = 5.0V, Id = 111mA, Zo = 50 Freq (GHz) Fmin (dB) opt Mag opt Ang Rn/Z0 Ga (dB) 0.5 2.02 0.112 1.9 0.28 21.89 0.8 1.69 0.132 30.3 0.24 21.28 0.9 1.75 0.153 0.7 0.26 21.04 1 1.79 0.143 5.4 0.26 20.93 1.5 1.77 0.115 83.6 0.21 20.17 2 1.89 0.207 117.5 0.20 19.17 2.5 2.43 0.458 132.2 0.22 18.16 3 2.66 0.670 176.8 0.06 16.20 3.5 3.38 0.772 -166.5 0.10 15.54 4 4.91 0.845 -143.6 0.80 13.85 4.5 7.01 0.889 -123.3 5.86 12.29 5 8.49 0.895 -103.5 10.58 9.57 5.5 9.71 0.892 -79.1 25.29 7.15 6 11.64 0.903 -57.0 56.34 4.63 Note: 1. Measurements are made on 10mils Rogers RO4350 TRL Board. 12 Part Number Ordering Information Part Number No. of Devices Container MGA-31189-BLKG 100 Antistatic Bag MGA-31189-TR1G 3000 13" Tape/Reel SOT89 Package Dimensions D D1 H POLISH E1 OR E L e S C e1 MATTE FINISH DIMENSIONS IN MILLIMETERS A b b1 b POLISH 13 DIMENSIONS IN INCHES SYMBOLS MIN NOM MAX MIN NOM MAX A 1.40 1.50 1.60 0.055 0.059 0.063 L 0.89 1.04 1.20 0.0350 0.041 0.047 b 0.36 0.42 0.48 0.014 0.016 0.018 b1 0.41 0.47 0.53 0.016 0.018 0.030 C 0.38 0.40 0.43 0.014 0.015 0.017 D 4.40 4.50 4.60 0.173 0.177 0.181 D1 1.40 1.60 1.75 0.055 0.062 0.069 E 3.94 - 4.25 0.155 - 0.167 E1 2.40 2.50 2.60 0.094 0.098 0.102 e1 2.90 3.00 3.10 0.114 0.118 0.122 H 0.35 0.40 0.45 0.014 0.016 0.018 S 0.65 0.75 0.85 0.026 0.030 0.034 e 1.40 1.50 1.60 0.054 0.059 0.063 Device Orientation USER FEED DIRECTION 11X 11X 11X CARRIER TAPE 11X REEL COVER TAPE Tape Dimensions O 1.5 +0.1/-0.0 8.00 0.30 .05 O 1.50 MIN. 2.00 .05 SEE NOTE 3 4.00 SEE NOTE 1 1.75 .10 A R 0.3 MAX. 5.50 .05 SEE NOTE 3 Bo 12.0 .3 A Ko R 0.3 TYP. Ao SECTION A - A 14 Ao = 4.60 Bo = 4.90 Ko = 1.90 DIMENSIONS IN MM NOTES: 1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE 0.2 2. CAMBER IN COMPLIANCE WITH EIA 481 3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE Reel Dimensions - 13" Reel R R LOKREEL MINNEAPOLIS USA U.S PAT 4726534 102.0 REF 1.5 ATTENTION Electrostatic Sensitive Devices Safe Handling Required 88 REF 330.0 REF "A" 96.5 6 PS Detail "B" 6 PS 8.4 - 0.2 (MEASURED AT HUB) 11.1 MAX. Detail "A" O 20.2 Dimensions in mm M IN +0.5 O 13.0 -0.2 2.0 0.5 For product information and a complete list of distributors, please go to our web site: +0.3 (MEASURED AT HUB) www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2012 Avago Technologies. All rights reserved. AV02-2532N - August 1, 2012