1 of 3
3Μ
3M™ Specialty Terminals
71F-250-32-NL, 72F-250-32-NL
Female Disconnect, Nylon Fully Insulated
Butted Seam
Data Sheet January 2017
Product
Number
Wire
Range
(AWG)
Mates with
Male Tab
Width
x Thickness
L
W
D
Barrel
Length
Barrel
I.D.
Maximum
Insulation
Diameter
71F-250-32-NL 22-18 0.250 x 0.032 0.87 0.37 0.23 0.25 0.080 0.145
72F-250-32-NL 16-14 0.250 x 0.032 0.87 0.37 0.23 0.25 0.080 0.145
Agency Approvals
and Self
Certifications
UL Standard No. 310, 3M File No. E70512
CSA Standard No. 22.2, 3M File No. LR22190
Specifications Max. Voltage Rating: 600 V Building Wire
1000 V Signs, Fixtures (Luminaires)
Max. Operating Temp: 221°F (105°C)
Max. Current: Same as Wire
Wire Size See Table above
Barrel Seam: Butted
Insulator Material: Nylon
Terminal Material: Brass
Plating: Tin
3M™ Specialty Terminals 71F-250-32-NL, 72F-250-32-NL
2 of 3
Installation
Information
Engineering
Specification
Crimp-Type Female Disconnect shall, electrically and mechanically, connect
permanently to the prestripped end of a stranded copper wire: and have a tongue
portion which grip a Male Disconnect in a separable, reusable manner, forming a Quick
Connect Wiring Termination.
The connector line shall offer tongue variations (sized to grip male tabs 0.187˝ x
0.250˝) and barrel variations in construction, non- insulated, nylon insulated with
insulation grip, nylon fully insulated, etc. The Female Disconnects shall have regulatory
agency coverage, UL Listing, CSA Certification. The tongue portion shall be marked
with the wire range and manufacturer’s symbol ().
Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire:
1000 V signs or lighting fixtures (luminaires) and temperature rated 221˚F (105˚C)
maximum.
Female Disconnects shall be suitable for field or factory wiring, with a UL
Recognized strain relief required.
UL Listed and CSA Certified for use on stranded copper (AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended 3M Scotchlok™ Crimp
Tool: TH-440, TH-450 (scissor style), TR-482, TR-490 (ratchet style) hand
tools.
Suitable for factory installation on steel or brass tabs, UL and CSA.
Suitable for field application on brass tabs, strain relief is required, UL only.
Barrel Crimp (Electrical)
3M™ Specialty Terminals 71F-250-32-NL, 72F-250-32-NL
3 of 3
3M and Scotchlok are trademarks of 3M Company.
3Μ
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800 472.1190
FAX: 800.262.6329
www.3M.com/electrical
Please recycle
© 3M 2017 All rights reserved
78-8126-5528-6 Rev C
Shelf Life &
Storage
3M Specialty Terminals have a 5-year shelf life from date of manufacture when stored in a
humidity controlled storage (10°C/50°F to 27°C/80°F and <75% relative humidity).
Availability
Please contact your local distributor; available from 3M.com/electrical [Where to Buy]
or call 1-800-472-1190.
Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must
evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product, which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon,
in writing, by an authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not be liable for any direct, indirect, special,
incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory
asserted.
