IMT_BR_03 September 20, 2001
Page 2 of 2
DC / DC CONVERTERS 200 WATT & 400 WATTS
TABLE 1: IMT Series Selection Chart cont.
MODEL POWER
( W ) INPUT
( VDC ) OUTPUT
( VDC ) OUTPUT CURRENT /
SHORT CRKT CURRENT
( See Note )
OUTPUT VOLT
TRIM RANGE
(% Vnom)
Min. Max.
TYPICAL
EFFICIENCY
( % )
IMT-200-300-2.1 210 200 - 400 2.1 95 / 0.01 -8 +10 70
IMT-200-300-3.3 165 200 - 400 3.3 50 / 0.01 -6 +9 72
IMT-200-300-5 200 200 - 400 540 / 0.01 -6 +9 78
IMT-200-300-10 200 200 - 400 10 20 / 0.01 -8 +10 80
IMT-200-300-12 204 200 - 400 12 17 / 0.01 -8 +10 81
IMT-200-300-15 150 200 - 400 15 10 / 0.01 -8 +10 80
IMT-400-300-5 400 200 - 400 580 / 0.01 -30 +10 81
IMT-400-300-12 408 200 - 400 12 34 / 0.1 -30 +10 82
IMT-400-300-24 408 200 - 400 24 17 / 0.1 -30 +10 86
Note: Once protection circuit is activated, the converter will shut down. To reset converter, remove the fault and turn the power off. Then turn the
power on again. (Non auto-recovery type)
Heat sink P/N 9050-1105 Qty: 1 per unit
Heat pad P/N 9050-1777 Qty: 1 per unit
Screws P/N 9050-0009 Qty: 4 per unit
World Headquarters BEHLMAN West Coast Office
80 Cabot Court Hauppauge, NY 11788 e-mail: sales@behlman.com 4532 Telephone Road Suite 103 Ventura, CA 93003
(631)435-0410 (800)874-6727 Fax(631)951-4341 Web-site: www.behlman.com (805)642-0660 (800)456-2006 Fax(805)642-0790