Note:
(1) Pulse test: Pulse width 300uSec, Duty cycle 1%
Symbols FR
101G
FR
102G
FR
103G
FR
104G
FR
105G
FR
106G
FR
107G Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Average forward rectified current at TA=55 I(AV) 1.0 Amp
Peak forward surge current 8.3mS single half sine-wave IFSM 30.0 Amps
Maximum instantaneous forward voltage
IFM=1.0A; TA=25 (Note 1) VF1.3 Volts
Maximum DC reverse current TA=25
at rated DC blocking voltage TA=100 IR
5.0
100.0 A
Maximum reverse recovery time
at IF=0.5A, IR=1.0A, Irr=0.25A Trr 150 250 500 nS
Typical junction capacitance Measured at 1.0MHz,
VR=4.0V CJ15.0 F
Operating and storage temperature range TJ, TSTG -65 to +150
Features
FR101G THRU FR107G
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Maximum Rating and Electrical Characteristics @25 unless otherwise specified
1
DIMENSIONS
DIM
inches mm
Note
Min. Max. Min. Max.
A 0.165 0.205 4.2 5.2
B 0.079 0.106 2.0 2.7
C 0.028 0.034 0.71 0.86
D 1.000 - 25.40 -
Mechanical Data
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High temperature metallurgically bonded construction
Capable of meeting environmental standards of
MIL-S-19500
For use in high frequency rectifier circuits
Fast switching for high efficiency
Glass passivated cavity-free junction
1.0 ampere operation at TA=55 with no thermal runaway
Typical IR less than 0.1 A
High temperature soldering guaranteed:
350 /10 seconds, 0.375 (9.5mm) lead length,
5 lbs. (2.3Kg) tension.
Case: DO-41 molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.335 gram
RATINGS AND CHARACTERISTIC CURVES
2
RATINGS AND CHARACTERISTIC CURVES
3
