NEC's 1.5W GaAs MMIC POWER AMPLIFIER UPG2118K DESCRIPTION * E-MODE HJ-FET TECHNOLOGY NEC's UPG2118K is a 1.5W, 3 stage power amplifier developed primarily for DCS/PCS1800 applications. With modified external matching the UPG2118K can be tuned from 800 to 2500 MHz. * SINGLE +3.2V POWER SUPPLY UE * HIGH EFFICIENCY: PAE = 42% MIN D FEATURES * HIGH SATURATED POWER: Pout = +31.5 dBm MIN * FLEXIBLE FREQUENCY RANGE Use of E-mode FET technology delivers high efficiency and high linearity with a single positive low voltage supply. * 20-PIN QFN PACKAGE: (4.15 X 4.15 X 0.9 mm) IN APPLICATIONS * 1800 MHz DCS/PCS * 915 AND 2450 ISM BAND USAGE * AUTOMATIC METER READERS NT * WIRELESS SECURITY * SATELLITE UPLINK ORDERING INFORMATION MARKING UPG2118K-E3-A 2118 PACKAGE 20-pin QFN SUPPLYING FORM * Embossed tape 12mm wide * 4.5 K pcs/reel SC O PART NUMBER ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) PARAMETERS SYMBOL RATINGS UNIT Tstg -45 to +85 C Operating Temperature Topt -45 to +85 C Supply Voltage1,2,3 VD1,2,3 8.0 V Active Bias Circuit Voltage VABC 8.0 V Reference Voltage Vref 5.0 V Junction Temperature Tj 150 C Input Power Pin 15 dBm Total Power Dissipation Ptot 4.0 W DI Storage Temperature Caution This device is ESD sensitive. Please take ESD precautions. The information contained in this document is being issued in advance of the production cycle for the device. The parameters for the device may change before final production or NEC Corporation, at its own discretion, may withdraw the device prior to its production. California Eastern Laboratories UPG2118K PIN CONNECTIONS CONNECTION PIN NO. CONNECTION 1 VG1,2 11 GND 2 Vref1,2 12 NC 3 VABC 13 NC 4 Vref3 14 GND 5 VG3 15 V D2 (Top View) 6 GND 16 VD1 7 VD3/RF OUT 17 GND 8 VD3/RF OUT 18 GND 9 VD3/RF OUT 19 Vattn 10 VD3/RF OUT 20 RF IN UE D PIN NO. PARAMETERS SYMBOL MIN VD1,2,3 +2.8 Supply Voltage Reference Voltage Active Bias Circuit Voltage IN RECOMMENDED OPERATING CONDITIONS (TA = 25C) TYP MAX UNIT +3.2 +5.5 V Vref +0.04 - +1.8 V VABC 0 2.6 5.5 V Pin 5 - 10 dBm NT Input Power ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA=+25C,f=1880MHz,VD=+3.2V,VABC=+2.6V,Vref=Vattn=1.8V, Pin=+5dBm) SYMBOL TEST CONDITIONS SC O CHARACTERISTICS MIN TYP MAX UNIT - 30 mA - - 10 mA - - 50 mA IABC Pout=+31.5dBm,VABC=Arbitrary Reference Current Iref Vref=Vattn=0.04 to 1.8V RF Leakage Current Ileak Output Power Pout +31.5 - - dBm Power Added Efficiency PAE 42.0 - - % Power Control Slope Pslope - - 50:1 Vrms/ Vref Minimum Output Power MPout - - -20 dBc DI Active Bias Circuit Current Vref=Vattn=0.04 V VABC=10K ohm+Load Vref=Vattn=0.04 V to 1.8V Vref=0.01V Vref=Vattn=0.04 V - UPG2118K SC O NT IN UE D TEST CIRCUIT DI NC (VG1,2 VG3) These pins must be connected to ground via a 1000pF capacitor for stability. DI SC O NT IN UE D PACKAGE DIMENSIONS (UNIT: mm) Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 02/08/2005 A Business Partner of NEC Compound Semiconductor Devices, Ltd. D 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 UE Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. IN CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Lead (Pb) Mercury Concentration Limit per RoHS (values are not yet fixed) NT Restricted Substance per RoHS < 1000 PPM Concentration contained in CEL devices -A Not Detected < 1000 PPM Not Detected < 100 PPM Not Detected < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected Cadmium SC O Hexavalent Chromium -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. DI Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.