172268 - AMPHENOL RF - Datasheet.Live

N COAXIAL CONNECTORS

119

N COAXIAL CONNECTORS

Impedance 50 ohm nominal

Frequency 0–11 GHz

Voltage Rating 1500 Volts peak

Dielectric Withstanding Voltage 2500 Volts rms

VSWR 1.3 max. 0–11 GHz

Contact Resistance Center contact 1.0 milliohm

Outer contact 0.2 milliohm

Insulation Resistance 5000 megohms (min)

PARTS NAME MATERIAL FINISH

Center Male Brass Gold or Silver plated

Contact Female Phosphor Bronze (nominal) or Gold or Silver plated

Beryllium Copper

Metal parts Brass Nickel*

Insulators Teflon None

Clamp gaskets Silicone rubber, Synthetic rubber None

Crimp ferrules Annealed copper Nickel*

ELECTRICAL SPECIFICATIONS

MATERIAL SPECIFICATIONS

*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.

The Connex N connectors with screw coupling are fully interchangeable with N connectors

made to the MIL-C-39012 specification. Designed for use in all systems where very good

R.F. and mechanical performance is critical, whether it be at low or high frequencies.

PLATING FOR INTERMODULATION PROBLEMS

Intermodulation problems have long been a serious concern for the telecommunications

market. The elimination of all nickel plating on N series connectors has gone a long way to

solve this problem. Connex offers both silver-plated (no nickel undercoat on body or under

30µ" gold center contact) and Nexcote-plated connectors. Nexcote is our trade name for

the popular white bronze plating, and is fully compatible with all other commercial tri-alloy

platings on the market.

For silver-plated connectors, add “S” to the end of the Connex P/N; for Nexcote, add “NEX”.

N.4 11/27/01 5:11 PM Page 119

N COAXIAL CONNECTORS

120

NOTE: 1. I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED

WITH 1.6/1.68 MM DIA. PIN.

INTERFACE MATING DIMENSIONS

N COAXIAL CONNECTORS

Letter Millimeters [Inches]

Minimum Maximum

A–15.93 [.628]

B 8.53 [.336] 8.74 [.344]

C 8.03 [.316] 8.13 [.320]

D 3.00 [.118] 3.15 [.124]

E 10.72 [.422] –

F 9.04 [.356] 9.19 [.362]

G 4.75 [.187] 5.26 [.207]

H 5.33 [.210] –

I 4.37 [.172] 5.13 [.202]

J 1.19 [.047] 1.96 [.077]

PLUG

JACK

Letter Millimeters [Inches]

Minimum Maximum

A 16.00 [.630] –

B–8.38 [.330]

C 1.60 [.063] 1.68 [.066]

D 3.00 [.118] 3.15 [.124]

E 0.41 [.016] 1.52 [.060]

F 10.11 [.398] 10.46 [.412]

G 5.33 [.210] 5.84 [.230]

H 3.30 [.130] 4.32 [.170]

I 0.08 [.003] –

J 4.01 [.158] 4.27 [.168]

K 4.50 [.177] 5.00 [.197]

N.4 11/27/01 5:11 PM Page 120

N COAXIAL CONNECTORS

CRIMP/SOLDER ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE

121

N COAXIAL CONNECTORS

All connector bodies, unless otherwise

noted, are nickel plated and all contacts

are gold plated 3µ".

All insulators are teflon. Silver plating is

available. Please contact Connex for sam-

ples and quotes.

All dimensions in millimeters and [inches].

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

01 58/ 58A/ 58C/ 141/ 303/

LMR195

™

/ B7806A

01A 55/ 142/ 223/ 400

01B LMR200

™

/ B7807A

02 58 PLENUM/THINNET/

122U/ B88240/ B89907

03 59/ 62/ 140/ 210

03A 59/ U-20AWG

04 59/ U PLENUM

04A 59/ U PLENUM-20AWG

05 174/ 188A/ 316/ B7805A

05A 316/ U DOUBLE BRAIDED

06 179/ 187/ B9221

06A 179/ U DOUBLE BRAIDED

07 8/ 8A/ 213/ 393

07A 214

07B 8X/ LMR240

™

/ B7808A

07C B9913/ LMR400

™

B7810A/ B8214

07D B89913

07E 11

07F 11/ U-14AWG/ B8213/

B9292/ B7731/ B1859A

08 6/ 143/ 212

08A B1694A/ B9248

08B 6 PLENUM/ B1695A

09 B8227/ 89207

10 .141 SEMI-RIGID/ 402/U

11 .085 SEMI-RIGID/ 405/U

12 .250 SEMI-RIGID

13 .047 SEMI-RIGID/ B1674A

14 178/ 196

15 B8281/ B9231/ B9141

15A B88281

16 180/ 195/ 122/ B8218/

B1865A/ B1855

17 LMR6OO

™

18 AT&T734A/ B1505A

19 AT&T735A/ B735A1

CABLE GROUP LEGEND

172100 01 Nickel Teflon 50 J

172142 01A Nickel Teflon 50 J

172214 01B Nickel Teflon 50 J

172161 02 Nickel Teflon 50 J

172101 03 Nickel Teflon 50 J

172128 05 Nickel Teflon 50 B/J

172171 05A Nickel Teflon 50 B/J

172102 07 Nickel Teflon 50 D

172166 07A Nickel Teflon 50 D

172135 07B Nickel Teflon 50 J

172102H243

07C Nickel Teflon 50 L

172249 07D Nickel Teflon 50 L

172202 08 Nickel Teflon 50 E

172281 14 Nickel Teflon 50 B

172206 17 Nickel Teflon 50 .610 HEX

172140 (GORE 1839)

Nickel Teflon 50 E

172290 Nickel Teflon 50 D

RG212/ B9861

172259 Nickel Teflon 50 .600 HEX

TIMES LMR500™

172282 Nickel Teflon 50 N/A

1/2" ANDREWS LDF4 HELIAX

172294 Silver Teflon 50 N/A

1/4" ANDREWS FSJ HELIAX

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — CAPTIVE CONTACT

172133 10 Nickel/Gold Teflon 50 N/A

172211 11 Nickel/Gold Teflon 50 N/A

172139 12 Nickel/Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER PLUG — SEMI-RIGID CABLE

N.4 11/27/01 5:11 PM Page 121

N COAXIAL CONNECTORS

CRIMP/SOLDER ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

122

For Cable Group Legend, see page 121

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP PLUGS

172156 9880 Nickel Teflon 50 D

172157 89880 Nickel Teflon 50 D

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

CRIMP PLUG — ETHERNET CABLE

172236 10 Nickel/Gold Teflon 50 N/A

172235 11 Nickel/Gold Teflon 50 N/A

172266 12 Nickel/Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE SOLDER PLUG — SEMI-RIGID CABLE

172103 01 Nickel Teflon 50 J

172147 01A Nickel Teflon 50 J

172216 01B Nickel Teflon 50 J

172104 03 Nickel Teflon 50 J

172204 05 Nickel Teflon 50 B/J

172205 05A Nickel Teflon 50 B/J

172105 07 Nickel Teflon 50 D

172209 07A Nickel Teflon 50 D

172148 07B Nickel Teflon 50 J

172203 07C Nickel Teflon 50 L

172297 07D Nickel Teflon 50 L

172207 17 Nickel Teflon 50 .610 HEX

172268 LMR500™ Nickel Teflon 50 .600 HEX

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP JACK — CAPTIVE CONTACT

172177 01 Nickel Teflon 50 A

172178 01A Nickel Teflon 50 A

172215 01B Nickel Teflon 50 A

172179 03 Nickel Teflon 50 A

172180 05 Nickel Teflon 50 B/J

172245 05A Nickel Teflon 50 B/J

172176 07 Nickel Teflon 50 D

172167 07A Nickel Teflon 50 D

172219 07B Nickel Teflon 50 A

172176 07C Nickel Teflon 50 L

172263 17 Nickel Teflon 50 .610 HEX

172295 Silver Teflon 50 N/A

1/4" ANDREWS HELIAX

172252 N/A Silver Teflon 50 N/A

ANDREWS 3/8" FSJ2-50 SUPER FLEX

172286 Silver Teflon 50 N/A

1/2" ANDREWS FSJ4-50 SUPER FLEX

172267 LMR500™ Nickel Teflon 50 .600 HEX

N.4 11/27/01 5:11 PM Page 122

N COAXIAL CONNECTORS

123

CRIMP/SOLDER ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

172106 01 Nickel Teflon 50 J

172132 01A Nickel Teflon 50 J

172217 01B Nickel Teflon 50 J

172192 02 Nickel Teflon 50 J

172107 03 Nickel Teflon 50 J

172129 05 Nickel Teflon 50 B

172221 05 Nickel Teflon 50 B

FRONT MOUNT

172165 05A Nickel Teflon 50 B

172108 07 Nickel Teflon 50 D

172168 07A Nickel Teflon 50 D

172149 07B Nickel Teflon 50 J

172220 07C Nickel Teflon 50 L

172264 17 Nickel Teflon 50 .610 HEX

172269 LMR500™ Nickel Teflon 50 .600 HEX

Remark: Rear Mount, except where indicated

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — CAPTIVE CONTACT — STANDARD CABLES

172238 10 Nickel/Gold Teflon 50 N/A

172237 11 Nickel/Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER JACK — SEMI-RIGID CABLE

172137 10 Nickel/Gold Teflon 50 N/A

172258 10 Nickel/Gold Teflon 50 N/A

FRONT MOUNT

172138 11 Nickel/Gold Teflon 50 N/A

172242 11 Nickel/Gold Teflon 50 N/A

FRONT MOUNT

172153 12 Nickel/Gold Teflon 50 N/A

Remark: Rear Mount, except where indicated

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD SOLDER JACK — SEMI-RIGID CABLE

172158 9880 Nickel Teflon 50 D

172159 89880 Nickel Teflon 50 D

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — ETHERNET CABLE

CRIMP ON

N.4 11/27/01 5:11 PM Page 123

N COAXIAL CONNECTORS

CRIMP/SOLDER ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

124

For Cable Group Legend, see page 121

172223 05 Nickel Teflon 50 N/A

172283 05 Nickel Teflon 50 B

SMALL FLANGE CRIMP

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CLAMP JACK — FRONT MOUNT — MINIATURE CABLE

172143 05 Nickel Teflon 50 N/A

REAR MOUNT FLATWASHER

172143-1005 Nickel Teflon 50 N/A

REAR MOUNT STARWASHER

172274 03 Nickel Teflon 75 N/A

REAR MOUNT CLAMP

172287 —Silver Teflon 50 N/A

ANDREWS 1/2" FSJ4-50 SUPERFLEX

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CLAMP JACK — REAR MOUNT — MINIATURE CABLE

172208 01 Nickel Teflon 50 J

172175 01A Nickel Teflon 50 J

172239 01B Nickel Teflon 50 J

172173 05 Nickel Teflon 50 B/J

172265 05 Nickel Teflon 50 N/A

CLAMP TERMINATION

172246 05A Nickel Teflon 50 B/J

172182 07 Nickel Teflon 50 D

172174 07A Nickel Teflon 50 D

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PANEL JACK — CAPTIVE CONTACT — STANDARD CABLE

172170 10 Nickel/Gold Teflon 50 N/A

172169 11 Nickel/Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER PANEL JACK — SEMI-RIGID CABLE

172223

N.4 11/27/01 5:11 PM Page 124

N COAXIAL CONNECTORS

125

CLAMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

172113 07/07A Nickel Teflon 50 N/A

172113H243

07C Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER PLUG — CAPTIVE CONTACT

172111 01/01A Nickel Teflon 50 N/A

172112 03 Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER PLUG — CAPTIVE CONTACT

172114 01 Nickel Teflon 50 N/A

172115 03 Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER JACK — CAPTIVE CONTACT

172116 07 Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER JACK — CAPTIVE CONTACT

N.4 11/27/01 5:11 PM Page 125

N COAXIAL CONNECTORS

BULKHEAD MOUNT SOLDER RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

126

For Cable Group Legend, see page 121

172185 N/A Nickel Teflon 50 N/A

Remark: Non-hermetic

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE — FRONT MOUNT

172255 N/A Nickel Teflon 50 N/A

172255-10

N/A Nickel Teflon 50 N/A

DOUBLE “D” MOUNT

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE — FRONT MOUNT

172270 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE — BNC MOUNTING HOLE — FRONT MOUNT

172277 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL RECEPTACLE

N.4 11/27/01 5:11 PM Page 126

N COAXIAL CONNECTORS

127

PANEL MOUNT/SOLDER RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

172260 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE PLUG — EXPOSED TFE TYPE

172117 N/A Nickel Teflon 50 N/A

172189 N/A Nickel Teflon 50 N/A

Remark: With gasket. Extended Teflon insulation

available in various lengths. Contact

Connex marketing department for part

number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE JACK — EXPOSED TFE TYPE

172118 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE PLUG — SOLDER POT TERMINAL

172119 N/A Nickel Teflon 50 N/A

172210 N/A Nickel Teflon 50 N/A

CAPTIVE CENTER CONTACT

172181 N/A Nickel Teflon 50 N/A

FLUSH REAR

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE JACK — SOLDER POT TERMINAL

N.4 11/27/01 5:11 PM Page 127

N COAXIAL CONNECTORS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

128

For Cable Group Legend, see page 121

PANEL MOUNT/SOLDER RECEPTACLES

172120 N/A Nickel Teflon 50 N/A

Slot width: 0.3 mm, 0.5 mm, 0.7 mm, 0.9 mm

172196 N/A Nickel Teflon 50 N/A

FLAT TAB

172222 N/A Nickel Teflon 50 N/A

EXTENDED TEFLON BLUNT POST

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE PLUG — SLOT TERMINAL

172121 N/A Nickel Teflon 50 N/A

Slot width: 0.3 mm, 0.5 mm, 0.7 mm, 0.9 mm

172186 N/A Nickel Teflon 50 N/A

2-HOLE FLANGE BLUNT POST

172155 N/A Nickel Teflon 50 N/A

.5 FLANGE SLOTTED POST

172146 N/A Nickel Teflon 50 N/A

.118 DIAMETER CONTACT SLOTTED POST

172232 N/A Nickel Teflon 50 N/A

.690 FLANGE SLOTTED POST

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE JACK — SLOT TERMINAL

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

172201 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE — ROUND FLANGE

172228 N/A Nickel Teflon 50 N/A

Remark: Conslult Connex Marketing for various lengths

available

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE JACK — EXTENDED TEFLON

N.4 11/27/01 5:11 PM Page 128

N COAXIAL CONNECTORS

129

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

PANEL MOUNT/SOLDER RECEPTACLES

172190 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE — EXTENDED BODY — POST CONTACT

172187 N/A Nickel Teflon 50 N/A

BLUNT POST

172218 N/A Nickel Teflon 50 N/A

EXTENDED TEFLON

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE — EXTENDED BODY

172218

172187

172195 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE — TAB POST

N.4 11/27/01 5:11 PM Page 129

N COAXIAL CONNECTORS

PANEL MOUNT/SOLDER RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

130

For Cable Group Legend, see page 121

172243 N/A Nickel Teflon 50 N/A

PCB LEGS, BRIGHT TIN

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PRINTED CIRCUIT BOARD RECEPTACLE

172248 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PRESS FIT RECEPTACLE

172234 N/A Tin Lead Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PRINTED CIRCUIT BOARD RECEPTACLE

panel thickness

.200" max

N.4 11/27/01 5:11 PM Page 130

N COAXIAL CONNECTORS

131

FEEDTHROUGH ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

172123 N/A Nickel Teflon 50 N/A

172123-10

N/A Nickel Teflon 50 N/A

FULLY-THREADED BODY 1.75" LONG

JACK-TO-JACK ADAPTER

172122 N/A Nickel Teflon 50 N/A

172212 RP

N/A Nickel Teflon 50 N/A

N PLUG REVERSE POLARIZED TO N JACK

172213 RP

N/A Nickel Teflon 50 N/A

N JACK REVERSE POLARIZED TO N PLUG

PLUG-TO-PLUG ADAPTER

172124 N/A Nickel Teflon 50 N/A

JACK-TO-JACK BULKHEAD ADAPTER

172276 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PLUG-TO-JACK ADAPTER

N.4 11/27/01 5:11 PM Page 131

172278-10

132

N COAXIAL CONNECTORS

FEEDTHROUGH ADAPTERS

TEE ADAPTERS/ANGLE ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

172127 N/A Nickel Teflon 50 N/A

TEE ADAPTER — JACK-TO-JACK-TO-JACK

172125 N/A Nickel Teflon 50 N/A

TEE ADAPTER — JACK-TO-PLUG-TO-JACK

172278 N/A Nickel Teflon 50 N/A

172278-10

N/A Nickel Teflon 50 N/A

EXTENDED BODY

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK PANEL ADAPTER

172278

N.4 11/27/01 5:11 PM Page 132

172261 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

ANGLE ADAPTER — PLUG-TO-PLUG

N COAXIAL CONNECTORS

133

TEE ADAPTERS/ANGLE ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 121

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

172126 N/A Nickel Teflon 50 N/A

172193 N/A Nickel Teflon 50 N/A

HIGH PERFORMANCE

ANGLE ADAPTER — PLUG-TO-JACK

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

172233 N/A Nickel Teflon 50 N/A

TEE ADAPTER — PLUG-TO-JACK-TO-JACK

N.4 11/27/01 5:11 PM Page 133

N COAXIAL CONNECTORS

ACCESSORIES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

134

For Cable Group Legend, see page 121

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

202102 N/A Nickel N/A N/A N/A

Remark: Chain length 100 [3.94]

N MALE CAP & CHAIN

N.4 11/27/01 5:11 PM Page 134