MJD44H11, MJD45H11 Complementary power transistors Datasheet Features - production data . Low collector-emitter saturation voltage Fast switching speed Surface-mounting TO-252 (DPAK) power package in tape and reel (suffix "T4") TAB2 3 1 Applications Power amplifier Switching circuits DPAK TO-252 Description Figure 1. These devices are manufactured using low voltage multi epitaxial planar technology. They are intended for general-purpose linear and switching applications. Internal schematic diagram C (TAB) (1) (TAB) E (3) (1) B B E Table 1. C (3) Device summary Order codes Marking Polarity Package Packaging MJD44H11T4 MJD44H11 NPN DPAK Tape and reel MJD45H11T4 MJD45H11 PNP DPAK Tape and reel May 2012 This is information on a product in full production. Doc ID 5470 Rev 4 1/11 www.st.com 11 Absolute maximum ratings 1 MJD44H11, MJD45H11 Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Unit Collector-emitter voltage (IB = 0) 80 V VEBO Emitter-base voltage (IC = 0) 5 V Collector current 8 A Collector peak current 16 A PTOT Total dissipation at Tcase = 25C 20 W TSTG Storage temperature -55 to 150 C 150 C Value Unit 6.25 C/W ICM TJ Max. operating junction temperature For PNP types voltage and current values are negative. Table 3. Symbol RthJC 2/11 Value VCEO IC Note: Parameter Thermal data Parameter Thermal resistance junction-case max Doc ID 5470 Rev 4 MJD44H11, MJD45H11 2 Electrical characteristics Electrical characteristics Tcase = 25 C; unless otherwise specified. Table 4. Electrical characteristics Symbol Parameter Test conditions Min. Typ. 80 - Max. Unit VCEO(sus)(1) Collector-emitter sustaining voltage (IB = 0) IC = 30 mA ICES Collector cut-off current (VBE = 0) VCE = 80 V - 10 A IEBO Emitter cut-off current (IC = 0) VEB = 5 V - 50 A V VCE(sat)(1) Collector-emitter saturation IC = 8 A voltage IB = 0.4 A - 1 V VBE(sat)(1) Base-emitter saturation voltage IC = 8 A IB = 0.8 A - 1.5 V IC = 2 A_ VCE = 1 V 60 - IC = 4 A_ _ VCE = 1 V 40 - hFE(1) DC current gain 1. Pulse test: pulse duration 300 s, duty cycle 2 %. Note: For PNP types voltage and current values are negative. 2.1 Typical characteristic (curves) Figure 2. Safe operating area Figure 3. Doc ID 5470 Rev 4 Derating curves 3/11 Electrical characteristics 4/11 MJD44H11, MJD45H11 Figure 4. DC current gain (NPN) Figure 5. DC current gain (PNP) Figure 6. Collector-emitter saturation voltage (NPN) Figure 7. Collector-emitter saturation voltage (PNP) Doc ID 5470 Rev 4 MJD44H11, MJD45H11 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Doc ID 5470 Rev 4 5/11 Package mechanical data Table 5. MJD44H11, MJD45H11 DPAK (TO-252) mechanical data mm Dim. Min. Typ. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 1.50 L1 2.80 L2 0.80 L4 0.60 1 R V2 6/11 Max. 0.20 0 8 Doc ID 5470 Rev 4 MJD44H11, MJD45H11 Figure 8. Package mechanical data DPAK (TO-252) drawing 0068772_I Doc ID 5470 Rev 4 7/11 Packaging mechanical data 4 MJD44H11, MJD45H11 Packaging mechanical data Table 6. DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 Figure 9. 18.4 22.4 DPAK footprint(a) 6.7 1.8 3 1.6 2.3 6.7 2.3 1.6 a. All dimensions are in millimeters 8/11 Doc ID 5470 Rev 4 AM08850v1 MJD44H11, MJD45H11 Packaging mechanical data Figure 10. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 W K0 B0 For machine ref. only including draft and radii concentric around B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 Figure 11. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 Doc ID 5470 Rev 4 9/11 Revision history 5 MJD44H11, MJD45H11 Revision history Table 7. 10/11 Document revision history Date Revision Changes 21-Jun-2004 2 Document migration, no content change. 06-Aug-2009 3 Updated mechanical data. 18-May-2012 4 Updated: mechanical data Inserted: packaging mechanical data Doc ID 5470 Rev 4 MJD44H11, MJD45H11 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 5470 Rev 4 11/11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: MJD44H11T4 MJD45H11T4