Thank you very much for purchasing Panasonic products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum use of this product. Kindly keep this manual in a convenient place for quick reference. INSTRUCTION MANUAL Universal Sensor Mounting Stand Horizontal mouting type 5 DIMENSIONS (Unit: mm) MS-AJ1, MS-AJ2 (Basic assembly) 11.8 Cable guide 6 (POM) Vertical mounting type MS-AJ1 MS-AJ2 MS-AJ1-A, MS-AJ2-A (Lateral arm assembly) 2- 3.2 mounting holes 2-3.2 4.2 oblong holes 1 17.8 12 20 t2 MJE-MSAJ1 No.0035-06V 20 28 4 16.5 6 Cable guide (POM) 210 (134) (Note 1) 10 arm (pipe) [Stainless steel (SUS304)] 45 3.2 33 25 20 20 28.45 12 Attachment (Nylon 6) 1 OUTLINE This product can fix CX-400 series, EQ-20 series, EX-40 series, reflectors (RF-210, RF-220, and RF-230), and fibers (FD-L51, FD-L52, FD-L53, FD-L54, and M3/M4/M6 threaded head fiber) at any angle or position. Two types of the mounting stand, MS-AJ1 which can be mounted on a horizontal surface and MS-AJ2 which can be mounted on a vertical surface, are available. 4.2 M4 hexagon-sockethead bolt Sensor mounting bracket [Stainless steel (SUS304)] (147) 218 (Note 1) (Note 2) Assembly sets Model No. No. Designation Base for horizontal mounting (Accessory for MS-AJ1 ) Base for vertical mounting (Accessory for MS-AJ2 ) Arm (Pipe) Attachment Sensor mounting bracket Cable guide Arm joint M4 (length 12mm) hexagon-socket-head bolt (Drilube applied product) M4 (length 15mm) hexagon-socket-head bolt (Drilube applied product) M4 (length 22mm) hexagon-socket-head bolt M4 nut M4 spring washer M4 flat washer M3 (length 14mm) screw with washers for CX-400 series M3 (length 18mm) screw with washers for EQ-20 series Auxiliary mounting plate for EQ-20 series M3 (length 16mm) screw with washers for EX-40 series Auxiliary mounting plate for EX-40 series Reflector mounting bracket M3 (length 8mm) screw with washers for RF-220 M4 (length 8mm) screw with washers for RF-230 Fiber mounting bracket MS-AJ1-A MS-AJ2-A Lateral arm assembly MS-AJ1-M MS-AJ2-M Assembly for reflector MS-AJ1-F MS-AJ2-F Assembly for fiber 1 1 1 1 1 1 1 1 2 1 1 2 1 3 1 1 5 1 1 2 2 1 2 1 1 1 1 1 1 1 2 1 1 1 1 3 1 1 2 2 1 2 1 1 1 1 3 1 1 MS-AJS Sensor mounting unit MS-AJR Reflector mounting unit MS-AJ-R1 Reflector mounting bracket MS-AJD Fiber mounting unit MS-FD-1 Fiber mounting bracket MS-AJL Arm joint unit (44.5) (Note 3) 28 MS-AJ1B MS-AJG MS-AJP MS-AJ2B (Cable guide) [Arm (Pipe)] (Base unit) 2 1 3 1 1 5 1 1 1 1 1 8 The base of MS-AJ2 differs. 2- 6.6 mounting holes 25.5 20 1 2 1 1 2 2 1 2 1 1 2 1 1 1 2 1 1 1 2 1 2 1 10 2- 6.6 mounting holes 10 Two M3 (length 14mm) screws with washers, two M3 (length 16mm) screws with washers, two M3 (length 18mm) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached. 31 24.5 32 46 15 8 1 2 2 1 2 2 1 16.5 6 1 Two M3 (length 14mm) screws with washers, two M3 (length 16mm) screws with washers, two M3 (length 18mm) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached. Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. 2) Refer to MS-AJ1, MS-AJ2 (basic assembly) for the assembly diagram with the base or sensor mounting bracket. 3) This value is 210mm for MS-AJ2-A. 4) This value is 36.5mm for MS-AJ2-A. 5) This value is 208.5mm for MS-AJ2-A. Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. 2) This value is 210mm for MS-AJ2. 3) This value is 36.5mm for MS-AJ2. MS-AJ1-F, MS-AJ2-F (Assembly for fiber) 1 2 2 (203.5) (Note 5) Cable guide (POM) 28.45 12 210 (134) (Note 1) 10 arm (pipe) [Stainless steel (SUS304)] 1 MS-AJ1-M, MS-AJ2-M (Assembly for reflector) (33) 20 12 (16.5) 45 25 40 50 Assembly diagram MS-AJ1-A, MS-AJ2-A, MS-AJ1-F, MS-AJ2-F The MS-AJ1-M, MS-AJ2-M (assembly for reflector) includes parts enclosed by the dotted line in place of the sensor mounting bracket. The MS-AJ1-F, MS-AJ2-F (assembly for fiber) includes sensor parts enclosed by the dotted line in place of the mounting bracket. Mounting example The below figure shows the CX-400 series on MS-AJ1. 4.2 Arm joint (Nylon 6) 10 arm (pipe) [Stainless steel (SUS304)] (147) (Note 1) 218 (Note 3) 4-M3 0.5 mounting holes (44.5) (Note 4) e.g.: FD-L51 45 33 Fiber mounting bracket [Stainless steel (SUS304)] (Note 2) 3 ASSEMBLY 18 20 45 25.5 (203.5) (Note 5) 8 Attachment (Nylon 6) e.g.: RF-230 e.g.: CX-400 series The base of MS-AJ2 differs. Fiber mounting bracket / MS-FD-1 Note: The assembly for reflector (MS-AJ cable guide. -M) does not contain the The base of MS-AJ2 differs. Note: To adjust the arm joint, loosen both the hexagon-socket-head bolts. 20 10 arm (pipe) [Stainless steel (SUS304)] Base (Note 2) (PA) (44.5) (Note 5) 28 20 45 Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. 2) Refer to MS-AJ1, MS-AJ2 (basic assembly) for the assembly diagram with the base. 3) This value is 210mm for MS-AJ2-F. 4) This value is 36.5mm for MS-AJ2-F. 5) This value is 208.5mm for MS-AJ2-F. 28 (147) (208) (Note 1) (Note 4) (Note 3) Base (Note 2) (PA) e.g.: CX-400 series M4 hexagon-sockethead bolt t2 11.8 Note: The numbers shown in the table adove indicate the quantities of the respective parts. MS-AJ1, MS-AJ2, MS-AJ1-M, MS-AJ2-M 8 Base (Note 2) (PA) 1 1 25.5 18 20 45 32 1 1 18 20 45 Base (PA) 1 1 1 1 Arm joint (Nylon 6) 10 arm (pipe) [Stainless steel (SUS304)] (44.5) (Note 4) Components MS-AJ1 MS-AJ2 Basic assembly 33 2-3.2 4.2 oblong holes 10 arm (pipe) [Stainless steel (SUS304)] 2 PART COMPOSITION Type (147) (Note 1) 218 (Note 3) (16.5) Sensor mounting bracket [Stainless steel (SUS304)] (Note 2) 2- 3.2 mounting holes 45 1 (33) 18 8 25.5 Two M3 (length 8mm) screws with washers and two M4 (length 8mm) screws with washers are attached. Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. 2) Refer to MS-AJ1, MS-AJ2 (basic assembly) for the assembly diagram with the base. This value is 143.5mm for MS-AJ2-M. This value is 200mm for MS-AJ2-M. This value is 40mm for MS-AJ2-M. t2 M3 threaded head fiber mounting hole M3 threaded head fiber mounting hole M3 threaded head fiber mounting hole M4 (length 12mm) 4 CAUTIONS The tightening torque of the attached M4 hexagon-socket-head bolts ( , , and in 3 ASSEMBLY) should be 1.2N m or less. To mount the stand on your equipment, use M6 screws. The tightening torque should be 2N m or less. (Please arrange the M6 screws separately.) Take care that if excessive torque is applied, the products may get damaged. When using the stand, take care that excess vibration is not applied to the sensor. Do not apply excess stress on any part of the stand. Do not thread the fiber cable into the pipe when the fiber head is mounted on MS-AJ1-F, MS-AJ2-F. Refer to the instruction manual attached to each product for details of CX-400 series, EQ-20 series, EX-40 series or fibers. 7 8 13 6 9 13.5 18.5 22 4-M3 2-M3 0.5 0.5 4.2 3.2 4 13 22 40 8 5.5 R14 4 8 3.2 4 mounting hole 13 35 55 Material: Stainless steel (SUS304) http://panasonic.net/id/pidsx/global Overseas Sales Division (Head Office) 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Phone: +81-568-33-7861 FAX: +81-568-33-8591 About our sale network, please visit our website. PRINTED IN JAPAN (c) Panasonic Industrial Devices SUNX Co., Ltd. 2012