240W Single Output Industrial DIN RAIL NDR-240 series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 Features Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 years warranty Applications Industrial control system Semi-conductor fabrication equipment Factory automation Electro-mechanical Description NDR-240 is one economical slim 240W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the c a b i n e t s . T h e e n t i r e s e r i e s a d o p t s th e f u l l r a n g e AC i n p u t f r o m 9 0 V A C t o 2 6 4 V A C a n d c o n f o r m s t o EN61000-3-2, the norm the European Union regulates for harmonic current. NDR-240 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 90%, the entire series can operate at the ambient temperature between -20 and 70 under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV EN60950-1, and etc.) make NDR-240 a very competitive power supply solution for industrial applications. Model Encoding NDR - 240 - 24 Output voltage Output wattage Series name File Name:NDR-240-SPEC 2015-05-04 NDR-240 240W Single Output Industrial DIN RAIL series SPECIFICATION MODEL OUTPUT NDR-240-24 NDR-240-48 DC VOLTAGE 24V 48V RATED CURRENT 10A 5A CURRENT RANGE 0 ~ 10A 0 ~ 5A RATED POWER 240W 240W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 48 ~ 55V 1.0% 24 ~ 28V VOLTAGE TOLERANCE Note.3 1.0% LINE REGULATION 0.5% LOAD REGULATION 1.0% SETUP, RISE TIME 1500ms, 100ms/230VAC 28ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT Note.4 90 ~ 264VAC 47 ~ 63Hz PF>0.98/115VAC, PF>0.95/230VAC at full load EFFICIENCY (Typ.) 88.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.5A/115VAC 20A/115VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 130% rated output power 90% 1.3A/230VAC 35A/230VAC Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 29 ~ 33V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +70 (Refer to "Derating Curve") EMC IMMUNITY MTBF DIMENSION PACKING NOTE 22ms/115VAC at full load 127 ~ 370VDC POWER FACTOR (Typ.) WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS 1.0% 3000ms, 100ms/115VAC at full load FREQUENCY RANGE OVERLOAD PROTECTION 0.5% 56 ~ 65V 20 ~ 95% RH non-condensing -40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 50) Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 UL508, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A 230.2K hrs min. MIL-HDBK-217F (25) 63*125.2*113.5mm (W*H*D) 1Kg; 12pcs/13Kg/1.1CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the derating curve for more details. 5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:NDR-240-SPEC 2015-05-04 NDR-240 240W Single Output Industrial DIN RAIL series Block Diagram fosc : 70KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V O.C.P. O.L.P. FG DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. Derating Curve Output derating VS input voltage 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 70 (VERTICAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz File Name:NDR-240-SPEC 2015-05-04 NDR-240 240W Single Output Industrial DIN RAIL series Mechanical Specification Case No.979C Unit:mm Top View 63 113.5 1 2 3 4 39 TB2 + 125.2 +V ADJ. DC OK TB1 1 2 3 Side View Front View Side View Terminal Pin No. Assignment (TB1) Pin No. 1 2 3 Assignment FG AC/N or DC AC/L or DC + Terminal Pin No. Assignment (TB2) Pin No. 1,2 3,4 Assignment DC OUTPUT -V DC OUTPUT+V Bottom View Installation Instruction 35 This series fits DIN-RAIL TS35/7.5 or TS35/15. For installation details, please refer to the USER MANUAL on http://www.meanwell.com/search/NDR-240/NDR_manual.pdf ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 (For reference only. Not included with unit.) Back View File Name:NDR-240-SPEC 2015-05-04 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: NDR-240-24 NDR-240-48