Part Number 856748 153.6 MHz SAW Filter Data Sheet Features * * * * * * * For TD-SCDMA applications Usable bandwidth 15 MHz Low Loss Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.75 mm SMP-53A Bottom View 1 1.75 NOM. 1.96 MAX. 0.76 2 3 4 12 5 11 6 13.3 10 9 8 7 2.54 2.18 6.50 2.54 1.17 x 3.76 0.79 Single-ended Configuration Pin No. Description 11 Input 5 Output 1,4,6,7,10,12 Ground 2,3,8,9 Case Ground 1.50 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev B 06/08 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856748 153.6 MHz SAW Filter Data Sheet Target Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit 15 16 161.1 161.6 153.6 10 17.2 18.3 22.3 144.9 162.1 144.5 162.8 12 25 146.1 145.6 - MHz dB MHz MHz MHz MHz MHz MHz MHz - 0.4 1.04 1.0 1.3 dB p-p s - 55 140 ns p-p - 10 - deg 50 40 40 40 45 62 51 43.7 58 70 - dB dB dB dB dB 8 - 10 50 50 - dB Center Frequency Insertion Loss at Center Frequency 1 dB Bandwidth (5) 3 dB Bandwidth (5) 40 dB Bandwidth (5) Lower 1 dB Band Edge (5) Upper 1 dB Band Edge (5) Lower 3 dB Band Edge (5) Upper 3 dB Band Edge (5) Amplitude Variation 146.1 - 161.1 MHz Group Delay at 153.6 Group Delay Variation 146.1 - 161.1 MHz Phase Ripple 146.1 - 161.1 MHz Relative Attenuation (5) 10 - 50 MHz 50 - 141.1 MHz 166.1 - 170.1 MHz 170.1 - 300 MHz 300 - 500 MHz Input/Output Return Loss 146.1 - 161.1 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to loss at center frequency 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 22nH 15nH 11 50 Single-ended Input 50 Subject to change or obsolescence without notice 5 68pF 56pF 1,2,3,4,6 7,8,9,10,12 Rev B 06/08 50 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 5 Part Number 856748 153.6 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev B 06/08 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856748 153.6 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 22nH 15nH 11 50 Single-ended Input 5 68pF 56pF 50 1,2,3,4,6 7,8,9,10,12 Marking 50 Single-ended Output 50 PCB Footprint 13.51 1.70 3.53 TriQuint 856748 JJJYXX 6.70 .99 .99 ID Dot 1.55 1.70 8.61 Date Code The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 O330 0.3 4.0 2.0 O1.5 A 1.75 11.5 13.9 24 Direction of travel O102 O20.2 O13.0 2.0 2.3 Section A-A 7.1 12.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev B 06/08 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856748 153.6 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev B 06/08 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5