12 11 10 9 8 7 | 6 | 5 | 4 3 2 [73796] NOTES: 41. MATERIAL: ZINC 2. FINISH: NON-CONDUCTIVE BLACK FINISH OUTSIDE SURFACES ONLY 3. THIS PART MATES WITH 71425-3001 AND 73796-2xx% 4. DULL NICKEL OVER COPPER FLASH. 5. LOGO TO BE ON A 0.256.010) RAISED PAD. 42.16 20.35 3353 1.660#.014 1.320 molex ote 39,00#0.35 @) \/ () 974 7.5440.01 6.80__| 0.27 16.76__| 660 MATERIAL FINISH WIRE AWG | LOGO 30.65 NUMBER 307 73796-2018 | NICKEL (SEE NOTE 4) 28 AWG | MOLEX 73796-2015 | BLACK (SEE NOTE 2) 28 AWG | MOLEX 73796-2012 | BLACK (SEE NOTE 2) 30 AWG HP 73796-2009 | BLACK (SEE NOTE 2) 30 AWG | NO LOGO 73796-2006 | NICKEL (SEE NOTE 4) 30 AWG | MOLEX 73796-2003 | BLACK (SEE NOTE 2) 30 AWG | MOLEX = SS Ow SS) |quality| GENERAL TOLERANCES THIRD ANGLE 73796-2027 | BLACK (SEE NOTE 2) 34 AWG | MOLEX 8833] |sympois| (UNLESS SPECIFIED) 24 METRIC |C] pRovection [REVISE ON CAD ONLY xo = 33 mm INCH DIMENSION STYLE TITLE 73796-2030 | NICKEL (SEE NOTE 4) 34 AWG | MOLEX Sssslz T PLACES E=-= 1 === MM/IN VHDCI UPPER DIE CAST + SS SEIW. o [3 PLACESE _[+.005_| ORAWN BY DATE SHELL REY AS 2 PLACES|0.13 [4.010 |KSTILES 10/11/2002 oro oy 1PLACE [0.25 |--- CHECKED BY DATE a> 5 a= WV. 0 ANGULAR 41/2 |KSTILES 10/14/2002 ole MOLEX INCORPORATED nSZae DRAFT WHERE APPLICABLE MRO BY DATE MATERIAL NO. ISD-7: NO. SHEET NO. > oN MBANAKIS _10/18/2002| SEE CHART |SD-73796-003] 1 oF 1 oc 3 =| _ MUST REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | D aw WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ie 11 10 9 8 | 7 | 6 5 4 3 | 2 | 412 11 10 9 8 7 6 3 4 3 2 73796 NOTES: 1. MATERIAL: ZINC 2. FINISH: NON-CONDUCTIVE BLACK FINISH OUTSIDE SURFACES ONLY 3. THIS PART MATES WITH 71425-3001 AND 73796-2x% 4. DULL NICKEL OVER COPPER FLASH. NOTE FOR LEAD FREE CONVERSON: THE PRIMARY SHIPPING CARTON WILL BE LABELED COMPLIANT TO RoHS DIRECTIVE 20027957EC AND ELV ANNEX Il OF DIRECTIVE 2000753/EC. CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. 33.53 1320 42.16 20.35 16604.014 30.65 1.207 = = 24.74 S ) 974 39+0.35 o 96ZEZ o 1535+.014 | VE BMV = = 6 6 =a a_l 16.76 660 4,80 21.95 0.19 864 MATERIAL NUMBER FINISH WIRE AWG 73796-2014 | NICKEL (SEE NOTE 4) 28 AWG 73796-2010 | BLACK (SEE NOTE 2) 28 AWG 2A] |QuAlity] GENERAL TOLERANCES | SCALE | DESIGN UNITS Oc] THIRD ANGLE | peyise on CAD ONLY 73796-2008 | NICKEL (SEE NOTE 4) 30 AWG SSI lsymBocs| (UNLESS SPECIFIED) 2.1 METRIC PROJECTION Dn 3 == mm INCH DIMENSION STYLE TITLE 73796-2004 | BLACK (SEE NOTE 2) 30 AWG 8 388 z TPES OE MM/IN VHDCI LOWER DIE CAST 73796-2020 | BLACK (SEE NOTE 2) 34 AWG 5 S20 SEW. oo [SPLACES#- [4.005 | ORAWTEY DATE SHELL 73796-2022 | NICKEL (SEE NOTE 4) 34 AWG a ee Pan 2 PLACES|# 0.13 [#070 PoP ES Tory 200% _ oo tl W 4 PLACE [0.25 4+--- (CHECKED BY DATE 5 S B n= WV. 0 ANGULAR 1/2 KSTILES 10/14/2002 ole MOLEX INCORPORATED 3S SSe [APPROVED BY DATE MATERIAL NO, DOCUMENT NO. SHEET NO. 5 eee DRAFT WHERE APPLICABLE IpaNaKiS 10/18/2002 SEE CHART |SD-73796-005| 1 oF em So MUST REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX | E ip WITHIN DIMENSIONS _ [INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ie 11 10 9 8 | 7 | 6 5 4 3 | 2 | 410 9 8 7 6 5 4 3 2 1 MATERIAL NUMBER MATERIAL NUMBER MATERIAL NUMBER MATERIAL NUMBER 73796-3004 73796-3003 73796-3002 73796-300 | BLACK FINISH KIT BLACK FINISH KIT NICKEL PLATE KIT BLACK FINISH KIT QUANTITY DESCRIPTION 73796-2012 73796-2009 73796-2006 73796-2003 UPPER SHELL - BLACK FINISH - BLACK FINISH - NICKEL PLATE - BLACK FINISH - HP LOGO - NO LOGO - MOLEX LOGO - MOLEX LOGO 73796-2004 73796-2004 73796-2008 73796-2004 LOWER SHELL - BLACK FINISH - BLACK FINISH - NICKEL PLATE ~ BLACK FINISH 70629-000| 70629-0001 70629-000| 70629-000 | 2 JACKSCREW 79099- 100 | 79099- 100 | 79099-1003 79099- 100 | 2 LONG SCREW Dim 79099-1002 79099-1002 79099-1004 79099-1002 2 SHORT SCREW Du SEE SHEET 2 FOR 28 AWG KITS . = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE NOTES: 2 &] |symeors| (UNLESS SPECIFIED) MM ONLY METRIC | CloRoeCTiON _ _ LL Ss = mm INCH DRAWN BY DATE TITLE |. PACKAGED PER DRAWING PK-70873-0869. =S2 RIO [RSE BANPSON 000708112 VHDCI DIECAST 2. FOR USE WITH PLUG ASSEMBLY KIT #71425-3001. ot & 3 PLACES|t --- _|4+--~ [CHECKED BY DATE SHELL KIT 3, SEE TERMINATION PROCEDURE DRAWING Sb-73796-009, |ZReselg] WO [ZPLACESE==[e-NBANAKIS__2000/06/'2 . - - |G Lesh +--- |[+--- APPROVED BY DATE 492e5 \/-0 se CULAR T/Z=MBANAKIS. 2000/06/12 fl MOLEX INCORPORATED 4. FOR ADDITITIONAL INFORMATION, SEE DRAWINGS FOR Wasee + aoe aK 5 | INDIVIDUAL COMPONENTS. BOeEe DRAFT WHERE APPLICABLE] SEE TABLE SD-73796-008 1 OF 2 ew oU <|_ WITTE Dies [SEE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E wy B INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_AM_T Rev, F 2009/06/18 | 9 | 8 7 a 5 4 | 3 | 2 | 110 9 8 7 6 5 4 3 2 1 MATERIAL NUMBER MATERIAL NUMBER MATERIAL NUMBER MATERIAL NUMBER 13796-3006 73796-3005 BLACK FINISH KIT NICKEL PLATE KIT QUANTITY DESCRIPTION 73796-2018 73796-2015 UPPER SHELL - NICKEL PLATE - BLACK FINISH - MOLEX LOGO - MOLEX LOGO 73796-2014 73796-2010 LOWER SHELL - NICKEL PLATE - BLACK FINISH 10629-000 | 70629-0001 2 JACKSCREW (9099-1003 79099- 100 | 2 LONG SCREW Dim 79099-1004 79099-1002 2 SHORT SCREW um = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE S &] |symaocs| (UNLESS SPECIFIED) MM ONLY METRIC | Cl eROECTION ~wS = mm INCH _ | DRAWN BY DATE TITLE -x = Sg|Q/-0 [ZPLACESe---_[4--- SAMPSON 2000/06/12 VHDCI_ DIECAST L 2 fF 3 PLACES |+--- +--- CHECKED BY DATE SHELL KIT WS ee zel5|\Y/-0 [2 PLACES[#--- [t=-- MBANAKIS 2000/06/12 x o = WW 4 PLACE |4--- +--- APPROVED BY DATE HSZS=| |\%/-0 ANGULAR #1/2MBANAKIS 2000/06/42 rfalex MOLEX INCORPORATED ws 3 a MATERIAL NO. DOCUMENT NO. SHEET NO. Wa 2o DRAFT WHERE APPLICABLE] SEE TABLE SD-73796-008 2 OF 2 woo = _ WITH? Oa GONs | SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E # INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 1b_trame_B_P_AM_T 9 8 7 6 5 4 | 3 | 2 | 4 Rev. F 2009/06/18B | 12 | 1 | 10 | 9 8 7 6 5 | | CABLE PREP AND TERMINATION INSTRUCTIONS 9.5+/-38 mm WRAP COPPER TAPE TIGHT AROUND WIRE BUNDLE 52/14 QO OPERATION APPLICATION FOR USE WITH RAPTOR TERMINATOR STEP | | CABLE PREP 623001100 la) STRIP OUTER JACKET, EXPOSING 15.2 TO /4 cm OF WIRE. |b) FOLD BRAID BACK OVER CABLE JACKET AND TRIM. lc) TRIM FOIL BACK TO JACKET. Id) WRAP COPPER TAPE AROUND BRAID. le) BLOW OFF PREPARED END WITH AIR. a mm MYLAR OR TEFLON TAPE 47 mm WIDE X_286 mm LONG X JO mm MAX THICK PLACE OVER TERMINATED WIRE COVER (BOTH SIDES) OPERATION TERMINATE CONNECTOR STEP 2 OUTSIDE SHELL 73796-2xxx JACKSCREWS 70629-000/ SEE AS-71425-001 FOR ADDITIONAL TERMINATION INFORMATION SHORT SCREW *79099-1002 OR *79099-1004 LONG SCREW *79099-/00/ OR *79099-1003 INSIDE SHELL 73796-2xxx TERMINATED PLUG ASSEMBLY KIT 71425-3001 MAKE SURE WIRES ARE INSIDE SHELL FLANGE OPERATION APPLICATION FOR USE WITH BACKSHELL KIT STEP 3} FINAL ASSEMBLY 13796-3*X 3 a) PLACE CABLE ASSEMBLY INTO INSIDE SHELL. ENSURE BRAID/TAPE IS PROPERLY SEATED INTO STRAIN RELIEF AREA 3 b) ASSEMBLE OUTER SHELL TO INSIDE SHELL AND SCREW TOGETHER. RECOMMENDED ASSEMBLY PROCEDURE: CLAMP SHELLS TOGETHER AND INSTALL SHORT SCREWS FIRST. 8 In/ib MAX TORQUE ALLOWED. DIMENSION STYLE DESIGN UNITS 2 a) TERMINATE CONNECTOR TO CABLE USING THE APPROPRIATE COLOR CODE/WIRE = =] [Quauity| GENERAL TOLERANCES aus | EHIRD. ANGLE SCHEME SO THAT THE CONNECTOR IS 17/15 mm FROM THE CABLE JACKET END. |W & 8] |sympots| (UNLESS SPECr EDT _ MM ONLY a METRIC | Cl PROJECTION 2 b) ENSURE THE CABLE JACKET IS CENTERED BEHIND THE CONNECTOR TO ALLOW Os R Riz WO |cPLACES ey $-- SAMPSON 6/12/2000 VHDCI TERMINATION PROPER FIT INTO BACKSHELL ake e 3 PLACES E-=> 1.005 [CHECKED BY DATE SPECIFICATION 2 ) COVER TERMINATED WIRE COVERS WITH TEFLON OR MYLAR TAPE. HS eeale|W~O |Z PLACES [+013 _]+.010 NBANAKIS 6/12/2000 zeeeyy 1 PLACE [0.25 |4--- [APPROVED BY DATE SZ W/O ANGULAR +1/2 BANAK 1S 6/12/2000 rhole MOLEX INCORPORATED S3A MATERIAL NO. DOCUMENT NO. SHEET NO. W2See DRAFT WHERE APPLICABLE N/A SD-73796-009 1 OF 4 Gws5< WITH Oe ONs | S2E] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX C i (INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION otra ec oata 12 1" 10 9 8 7 6 5 | 4 3 2 | 1 Rev. F 2009/06/18| | 79099 STANDARD PHILLIPS HEAD NOTES: MATERIAL: STAINLESS STEEL 2. FINISH: NICKEL PLATE. 5. USED ON 73/96 SHELLS. S| -3124.0 10 (7,924.25) 2-56 SCREW THREAD 4, PACK IN QUANTITIES OF 741 PCS. DIMENSIONS SHOWN (METRIC) INCH REVISE ONLY ON CAD SYSTEM LEUSES OS fame SNE VE VHDCI LONG SHELL SCREW sriace |# OI | --7- -NICKEL PLATE 2pLace {+ .O25 | +(Q.25) | PLACE ---- | +(@,64) oN MOLEX INCORPORATED SHEET NO, DATE molex [INITIAL RELEASE PER) HERESIES par ES ste sl Lot | OA ECR UDT2000-0966 _ _ - oo7pAe'8 _sas [ev SAS [ev SAS aS woe | 20- ft ee SVE LTR. REVISIONS LTR. REVISIONS APP'D. MB [SCALE 4g | eR MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION. | (C 6 5 4 3 | |2 | | 79099 STANDARD PHILLIPS HEAD NOTES: MATERIAL: STAINLESS STEEL = .203+.010 (5,164.25) \ ne SCREW THREAD 2. FINISH: NICKEL PLATE 3. USED ON 73796 SHELLS. 4. SHIP IN QUANTITIES OF 741 PCS. DIMENSIONS SHOWN (METRIC) INCH REVISE ONLY ON CAD SYSTEM YOLERGESE IMCL a [TTT tee VHDCI SHORT SHELL SCREW sas fs O10 | -NICKEL PLATE | PLACE ---- | +(@,64) Ld MOLEX INCORPORATED SHEET NO, DATE INITIAL RELEASE PER] oYgLmsie rugs ust [oor uei. ets usas| Lot | (00/047'18 A ECR UDT2000-0966 _ -P) _ 00/04/18 sos PR Sas [aR= Sqc _19099 I@24 | SD-/79099 IDO4 LTR, REVISIONS LTR. REVISIONS AFPD. AB [SCALE Qe MOLEX ING. AND SHOULD NOT BE USED WITHOUT MITTEN PERMISSION) [_ | 6 5 4 3 2 |