SN54LVC138A, SN74LVC138A www.ti.com SCAS291V - MARCH 1993 - REVISED JANUARY 2013 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS Check for Samples: SN54LVC138A, SN74LVC138A FEATURES 1 2 3 4 16 15 14 13 5 12 6 11 7 10 8 9 VCC Y0 Y1 Y2 Y3 Y4 Y5 Y6 B C G2A G2B G1 Y7 1 16 2 15 3 14 4 13 5 12 6 7 11 10 8 9 SN54LVC138A . . . FK PACKAGE (TOP VIEW) B A NC VCC Y0 SN74LVC138A . . . RGY PACKAGE (TOP VIEW) Y0 Y1 Y2 Y3 Y4 Y5 C G2A NC G2B G1 4 3 2 1 20 19 18 5 6 17 16 7 8 15 14 9 10 11 12 13 Y1 Y2 NC Y3 Y4 Y7 GND NC Y6 Y5 1 * VCC A B C G2A G2B G1 Y7 GND Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) BRK BRK Y6 SN54LVC138A . . . J OR W PACKAGE SN74LVC138A . . . D, DB, DGV, NS, OR PW PACKAGE (TOP VIEW) * A * Operate From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max tpd of 5.8 ns at 3.3 V Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25C Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25C GND * * * * NC - No internal connection 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1993-2013, Texas Instruments Incorporated SN54LVC138A, SN74LVC138A SCAS291V - MARCH 1993 - REVISED JANUARY 2013 www.ti.com DESCRIPTION/ORDERING INFORMATION The SN54LVC138A 3-line to 8-line decoder/demultiplexer is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC138A 3-line to 8-line decoder/demultiplexer is designed for 1.65-V to 3.6-V VCC operation. The 'LVC138A devices are designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, delay times of these decoders and the enable time of the memory usually are less than the typical access time of the memory. This means that the effective system delay introduced by the decoders is negligible. The conditions at the binary-select inputs and the three enable inputs select one of eight output lines. Two active-low enable inputs and one active-high enable input reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters, and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment. ORDERING INFORMATION PACKAGE (1) TA SN74LVC138ARGYR LC138A QFN - RSV Reel of 3000 SN74LVC138ARSVR ZTP Tube of 40 SN74LVC138AD Reel of 2500 SN74LVC138ADR Reel of 250 SN74LVC138ADT Reel of 2000 SN74LVC138ANSR LVC138A SSOP - DB Reel of 2000 SN74LVC138ADBR LC138A Tube of 90 SN74LVC138APW Reel of 2000 SN74LVC138APWR Reel of 250 SN74LVC138APWT Reel of 2000 SN74LVC138ADGVR TVSOP - DGV VFBGA - GQN VFBGA - ZQN (Pb-free) (1) 2 LVC138A SOP - NS TSSOP - PW -55C to 125C TOP-SIDE MARKING Reel of 1000 SOIC - D -40C to 85C ORDERABLE PART NUMBER QFN - RGY Reel of 1000 SN74LVC138AGQNR SN74LVC138AZQNR LC138A LC138A LC138A CDIP - J Tube of 25 SNJ54LVC138AJ SNJ54LVC138AJ CFP - W Tube of 150 SNJ54LVC138AW SNJ54LVC138AW LCCC - FK Tube of 55 SNJ54LVC138AFK SNJ54LVC138AFK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Submit Documentation Feedback Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A SN54LVC138A, SN74LVC138A www.ti.com SCAS291V - MARCH 1993 - REVISED JANUARY 2013 TERMINAL ASSIGNMENTS GQN OR ZQN PACKAGE (TOP VIEW) Y3 Y4 Y5 Y6 SN54LVC138A. . .RSV PACKAGE (TOP VIEW) 12 11 10 9 1 Y2 13 8 GND Y1 14 7 Y7 6 G1 1 2 3 4 A B C G2A Y0 15 VCC 16 5 G2B 2 3 4 A 1 2 3 4 A B A VCC Y0 B C NC (1) NC (1) Y1 C G2B G2A Y3 Y2 B D G1 C E GND NC (1) NC Y7 (1) Y4 Y6 Y5 D E (1) NC - No internal connection Table 1. SDFGDFGDFG FUNCTION TABLE ENABLE INPUTS SELECT INPUTS OUTPUTS G1 G2A G2B C B A Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 X H X X X X H H H H H H H H X X H X X X H H H H H H H H L X X X X X H H H H H H H H H L L L L L L H H H H H H H H L L L L H H L H H H H H H H L L L H L H H L H H H H H H L L L H H H H H L H H H H H L L H L L H H H H L H H H H L L H L H H H H H H L H H H L L H H L H H H H H H L H H L L H H H H H H H H H H L Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A Submit Documentation Feedback 3 SN54LVC138A, SN74LVC138A SCAS291V - MARCH 1993 - REVISED JANUARY 2013 www.ti.com LOGIC DIAGRAM (POSITIVE LOGIC) 15 A 1 14 Select Inputs B C 13 3 12 10 Enable Inputs 6 9 4 7 G2A G2B Y1 2 11 G1 Y0 Y2 Y3 Data Outputs Y4 Y5 Y6 Y7 5 Pin numbers shown are for the D, DB, DGV, J, NS, PW, RGY, and W packages. 4 Submit Documentation Feedback Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A SN54LVC138A, SN74LVC138A www.ti.com SCAS291V - MARCH 1993 - REVISED JANUARY 2013 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage range -0.5 6.5 V VI Input voltage range (2) -0.5 6.5 V VO Output voltage range (2) -0.5 VCC + 0.5 IIK Input clamp current VI < 0 -50 mA IOK Output clamp current VO < 0 -50 mA IO Continuous output current 50 mA 100 mA (3) Continuous current through VCC or GND D package (4) 73 DB package (4) 82 DGV package (4) JA Tstg (1) (2) (3) (4) (5) Package thermal impedance 120 GQN/ZQN package (4) 78 NS package (4) 64 PW package (4) 108 RGY package (5) 39 Storage temperature range V -65 C/W 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. The value of VCC is provided in the recommended operating conditions table. The package thermal impedance is calculated in accordance with JESD 51-7. The package thermal impedance is calculated in accordance with JESD 51-5. Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A Submit Documentation Feedback 5 SN54LVC138A, SN74LVC138A SCAS291V - MARCH 1993 - REVISED JANUARY 2013 www.ti.com Recommended Operating Conditions (1) SN54LVC138A VCC Supply voltage VIH High-level input voltage Operating Data retention only MAX MIN MAX 2 3.6 1.65 3.6 1.5 1.5 VCC = 1.65 V to 1.95 V 1.7 2 Low-level input voltage V V 2 VCC = 1.65 V to 1.95 V VIL UNIT 0.65 x VCC VCC = 2.3 V to 2.7 V VCC = 2.7 V to 3.6 V SN74LVC138A MIN 0.35 x VCC VCC = 2.3 V to 2.7 V 0.7 VCC = 2.7 V to 3.6 V 0.8 V 0.8 VI Input voltage 0 5.5 0 5.5 V VO Output voltage 0 VCC 0 VCC V IOH High-level output current VCC = 1.65 V -4 VCC = 2.3 V -8 VCC = 2.7 V -12 -12 VCC = 3 V -24 -24 VCC = 1.65 V IOL Low-level output current 4 VCC = 2.3 V 8 VCC = 2.7 V 12 12 VCC = 3 V 24 24 t/v Input transition rise or fall rate TA (1) 6 Operating free-air temperature mA 10 -55 125 -40 mA 10 ns/V 85 C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A SN54LVC138A, SN74LVC138A www.ti.com SCAS291V - MARCH 1993 - REVISED JANUARY 2013 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = -4 mA 1.65 V IOH = -8 mA 2.3 V IOH = -24 mA (1) MIN TYP (1) MAX 1.2 1.7 2.7 V 2.2 2.2 3V 2.4 2.4 3V 2.2 2.2 V 0.2 2.7 V to 3.6 V 0.2 1.65 V 0.45 IOL = 8 mA 2.3 V 0.7 IOL = 12 mA 2.7 V 0.4 0.4 IOL = 24 mA 3V 0.55 0.55 II VI = 5.5 V or GND VI = VCC or GND, V 3.6 V 5 5 A 3.6 V 10 10 A 2.7 V to 3.6 V 500 500 A IO = 0 One input at VCC - 0.6 V, Other inputs at VCC or GND UNIT VCC - 0.2 IOL = 4 mA ICC Ci MAX 1.65 V to 3.6 V IOL = 100 A ICC TYP SN74LVC138A VCC - 0.2 2.7 V to 3.6 V IOH = -12 mA VOL MIN (1) 1.65 V to 3.6 V IOH = -100 A VOH SN54LVC138A VCC VI = VCC or GND 3.3 V 5 5 pF All typical values are at VCC = 3.3 V, TA = 25C. Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) SN54LVC138A FROM (INPUT) PARAMETER TO (OUTPUT) VCC = 2.7 V MIN A or B or C tpd G2A or G2B Y G1 VCC = 3.3 V 0.3 V UNIT MAX MIN MAX 7.9 1 6.7 7.4 1 6.5 6.4 1 5.8 ns Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1) SN74LVC138A PARAMETER FROM (INPUT) TO (OUTPUT) A or B or C tpd G2A or G2B Y G1 VCC = 1.8 V 0.15 V VCC = 2.5 V 0.2 V VCC = 2.7 V VCC = 3.3 V 0.3 V UNIT MIN MAX MIN MAX MIN MAX MIN MAX 1 22 1 9.9 1 7.9 1 6.7 1 21 1 9.4 1 7.4 1 6.5 1 20.3 1 8.4 1 6.4 1 5.8 tsk(o) 1 Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A Submit Documentation Feedback ns ns 7 SN54LVC138A, SN74LVC138A SCAS291V - MARCH 1993 - REVISED JANUARY 2013 www.ti.com Operating Characteristics TA = 25C PARAMETER Cpd 8 Power dissipation capacitance Submit Documentation Feedback TEST CONDITIONS VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V TYP TYP TYP f = 10 MHz 25 26 27 UNIT pF Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A SN54LVC138A, SN74LVC138A www.ti.com SCAS291V - MARCH 1993 - REVISED JANUARY 2013 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V 0.15 V 2.5 V 0.2 V 2.7 V 3.3 V 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V 2 ns 2 ns 2.5 ns 2.5 ns VM VLOAD CL RL V VCC/2 VCC/2 1.5 V 1.5 V 2 x VCC 2 x VCC 6V 6V 30 pF 30 pF 50 pF 50 pF 1 k 500 500 500 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATION VI VM Input VM 0V VOH VM Output VM VOL VM 0V VLOAD/2 VM tPZH VOH Output VM tPLZ Output Waveform 1 S1 at VLOAD (see Note B) tPLH tPHL VM tPZL tPHL tPLH VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VOL + V VOL tPHZ Output Waveform 2 S1 at GND (see Note B) VM VOH - V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 . D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A Submit Documentation Feedback 9 SN54LVC138A, SN74LVC138A SCAS291V - MARCH 1993 - REVISED JANUARY 2013 www.ti.com REVISION HISTORY Changes from Revision T (July 2005) to Revision U * Page Added QFN - RSV package option to the ORDERING INFORMATION table. ................................................................... 2 Changes from Revision U (OCTOBER 2012) to Revision V * 10 Page Changed RSV pinout drawing to drawing with correct pinout. ............................................................................................. 2 Submit Documentation Feedback Copyright (c) 1993-2013, Texas Instruments Incorporated Product Folder Links: SN54LVC138A SN74LVC138A PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) 5962-9752601Q2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629752601Q2A SNJ54LVC 138AFK 5962-9752601QEA ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9752601QE A SNJ54LVC138AJ 5962-9752601QFA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9752601QF A SNJ54LVC138AW 5962-9752601V2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type 59629752601V2A SNV54LVC 138AFK 5962-9752601VEA ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type 5962-9752601VE A SNV54LVC138AJ 5962-9752601VFA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type 5962-9752601VF A SNV54LVC138AW SN74LVC138AD ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 SN74LVC138ADBLE OBSOLETE SSOP DB 16 TBD Call TI Call TI -40 to 85 SN74LVC138ADBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138ADBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138ADBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138ADE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADGVR ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A Addendum-Page 1 LVC138A Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 18-Oct-2013 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) SN74LVC138ADGVRE4 ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138ADGVRG4 ACTIVE TVSOP DGV 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138ADR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADT ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADTE4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ADTG4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138AGQNR OBSOLETE BGA MICROSTAR JUNIOR GQN 20 TBD Call TI Call TI -40 to 85 LC138A SN74LVC138ANSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ANSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138ANSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LVC138A SN74LVC138APW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWLE OBSOLETE TSSOP PW 16 TBD Call TI Call TI -40 to 85 SN74LVC138APWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 18-Oct-2013 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) SN74LVC138APWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWT ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWTE4 ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138APWTG4 ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 LC138A SN74LVC138ARGYR ACTIVE VQFN RGY 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 LC138A SN74LVC138ARGYRG4 ACTIVE VQFN RGY 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 85 LC138A SN74LVC138ARSVR ACTIVE UQFN RSV 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM -40 to 85 ZTP SN74LVC138AZQNR ACTIVE BGA MICROSTAR JUNIOR ZQN 20 1000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM -40 to 85 LC138A SNJ54LVC138AFK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 59629752601Q2A SNJ54LVC 138AFK SNJ54LVC138AJ ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9752601QE A SNJ54LVC138AJ SNJ54LVC138AW ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9752601QF A SNJ54LVC138AW (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54LVC138A, SN54LVC138A-SP, SN74LVC138A : * Catalog: SN74LVC138A, SN54LVC138A * Automotive: SN74LVC138A-Q1, SN74LVC138A-Q1 * Enhanced Product: SN74LVC138A-EP, SN74LVC138A-EP * Military: SN54LVC138A * Space: SN54LVC138A-SP NOTE: Qualified Version Definitions: Addendum-Page 4 PACKAGE OPTION ADDENDUM www.ti.com 18-Oct-2013 * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Enhanced Product - Supports Defense, Aerospace and Medical Applications * Military - QML certified for Military and Defense Applications * Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 8-Jul-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.6 2.5 12.0 16.0 Q1 SN74LVC138ADBR SSOP DB 16 2000 330.0 16.4 8.2 SN74LVC138ADGVR TVSOP DGV 16 2000 330.0 12.4 6.8 4.0 1.6 8.0 12.0 Q1 SN74LVC138ADR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN74LVC138APWR TSSOP PW 16 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1 SN74LVC138APWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LVC138APWRG4 TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LVC138APWT TSSOP PW 16 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74LVC138ARGYR VQFN RGY 16 3000 330.0 12.4 3.8 4.3 1.5 8.0 12.0 Q1 ZQN 20 1000 330.0 12.4 3.3 4.3 1.6 8.0 12.0 Q1 SN74LVC138AZQNR BGA MI CROSTA R JUNI OR Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 8-Jul-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC138ADBR SSOP DB 16 2000 367.0 367.0 38.0 SN74LVC138ADGVR TVSOP DGV 16 2000 367.0 367.0 35.0 SN74LVC138ADR SOIC D 16 2500 333.2 345.9 28.6 SN74LVC138APWR TSSOP PW 16 2000 364.0 364.0 27.0 SN74LVC138APWR TSSOP PW 16 2000 367.0 367.0 35.0 SN74LVC138APWRG4 TSSOP PW 16 2000 367.0 367.0 35.0 SN74LVC138APWT TSSOP PW 16 250 367.0 367.0 35.0 SN74LVC138ARGYR VQFN RGY 16 3000 367.0 367.0 35.0 SN74LVC138AZQNR BGA MICROSTAR JUNIOR ZQN 20 1000 338.1 338.1 20.6 Pack Materials-Page 2 MECHANICAL DATA MPDS006C - FEBRUARY 1996 - REVISED AUGUST 2000 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE 24 PINS SHOWN 0,40 0,23 0,13 24 13 0,07 M 0,16 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 0-8 1 0,75 0,50 12 A Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,08 14 16 20 24 38 48 56 A MAX 3,70 3,70 5,10 5,10 7,90 9,80 11,40 A MIN 3,50 3,50 4,90 4,90 7,70 9,60 11,20 DIM 4073251/E 08/00 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. Falls within JEDEC: 24/48 Pins - MO-153 14/16/20/56 Pins - MO-194 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated