https://www.phoenixcontact.com/us/products/2903660
03/29/2021Page2/6
Single relay-REL-IR2/LDP- 24DC/2X21-2903660
Technical data
Coil side
Input voltage range in reference to UNsee diagram
Typical input current at UN42 mA
Typical response time 13 ms
Typical release time 14 ms
Protective circuit Damping diode
Status display Yellow LED
Power dissipation for nominal condition 1.01 W
Contact side
Contact type 2 changeover contacts
Type of switch contact Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (At 24 mA)
Min. switching current 5 mA (at 24V)
Maximum inrush current 30 A (20 ms, N/O contacts)
Limiting continuous current 12 A
Interrupting rating (ohmic load) max. 288 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
3000 VA (for 250 V AC)
Switching capacity min. 0.12 W
Motor load according to UL 508 1/2HP, 240VAC
General
Test voltage 2.5 kVrms (50Hz, 1min., winding/contact)
2.5 kVrms (50Hz, 1min., contact/contact)
2.5 kVrms (50Hz, 1min., changeover contact/changeover contact)
Operating mode 100% operating factor
Mechanical service life approx. 2x 107 cycles
Service life, electrical see diagram
Mounting position any
Connection data
Connection method Plug connection
Standards and Regulations