Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Single-Channel: 6N138M, 6N139M Dual-Channel: HCPL2730M, HCPL2731M 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Features Description * * * * * * The single-channel, 6N138M, 6N139M and dual-channel HCPL2730M, HCPL2731M optocouplers consist of an AlGaAs LED optically coupled to a high gain split darlington photodetector. Low Current - 0.5 mA Superior CTR - 2000% Superior CMR - 10 kV/s CTR Guaranteed 0 to 70C Dual Channel - HCPL2730M, HCPL2731M Safety and Regulatory Approvals - UL1577, 5,000 VACRMS for 1 Minute - DIN EN/IEC60747-5-5 The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocoupler. In the dual channel devices, HCPL2730M and HCPL2731M, an integrated emitter-base resistor provides superior stability over temperature. Applications * * * * * * Digital Logic Ground Isolation Telephone Ring Detector EIA-RS-232C Line Receiver High Common Mode Noise Line Receiver P Bus Isolation Current Loop Receiver The combination of a very low input current of 0.5 mA and a high current transfer ratio of 2000% makes this family particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to CMOS as well as high fan-out TTL requirements. An internal noise shield provides exceptional common mode rejection of 10 kV/s. Related Resources * * * * www.fairchildsemi.com/products/optoelectronics/ www.fairchildsemi.com/pf/HC/HCPL0700.html www.fairchildsemi.com/pf/HC/HCPL0730.html www.fairchildsemi.com/pf/HC/HCPL0731.html Schematics N/C 1 Package Outlines 8 VCC + 1 8 VCC VF1 + 2 8 7 VB _ 2 6 VO _ 7 V01 8 1 1 VF _ 3 3 6 V02 VF2 N/C 4 5 GND 6N138M / 6N139M + 4 5 GND HCPL2730M / HCPL2731M Figure 1. Schematics (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 8 8 1 1 Figure 2. Package Options www.fairchildsemi.com 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers August 2016 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage Characteristics < 150 VRMS I-IV < 300 VRMS I-IV < 450 VRMS I-III < 600 VRMS I-III < 1,000 VRMS (Option T, TS) I-III Climatic Classification 40/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol 175 Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 2,262 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 2,651 Vpeak VIORM Maximum Working Insulation Voltage 1,414 Vpeak VIOTM Highest Allowable Over-Voltage 6,000 Vpeak External Creepage 8.0 mm External Clearance 7.4 mm 10.16 mm 0.5 mm VPR Parameter External Clearance (for Option TV, 0.4" Lead Spacing) DTI TS IS,INPUT PS,OUTPUT RIO Distance Through Insulation (Insulation Thickness) Case Temperature(1) Input Current(1) Output Power (Duty Factor 2.7%)(1) Insulation Resistance at TS, VIO = 500 V(1) 150 C 200 mA 300 mW > 109 Note: 1. Safety limit value - maximum values allowed in the event of a failure. (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 2 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25C unless otherwise specified. Symbol Parameter Value Unit TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +100 C Junction Temperature -40 to +125 C 260 for 10 sec C Value Unit TJ TSOL Symbol Lead Solder Temperature Parameter Device EMITTER IF (avg) DC/Average Forward Input Current Per Channel All 20 mA IF (pk) Peak Forward Input Current Per Channel (50% duty cycle, 1 ms P.W.) All 40 mA IF (trans) Peak Transient Input Current Per Channel ( 1 s P.W., 300 pps) All 1 A VR Reverse Input Voltage Per Channel All 5 V PD Input Power Dissipation Per Channel(2) All 35 mW Average Output Current Per Channel All 60 mA Emitter-Base Reverse Voltage 6N138M, 6N139M 0.5 V DETECTOR IO (avg) VER VCC, VO PO Supply Voltage, Output Voltage Output Power Dissipation Per Channel 6N138M, HCPL2730M -0.5 to 7.0 6N139M, HCPL2731M -0.5 to 18.0 All V 100 mW Note: 2. No derating required for devices operated within the TOPR specification (6N138M and 6N139M only). (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 3 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Absolute Maximum Ratings Individual Component Characteristics (VCC = 5.0 V, TA = 0C to 70C unless otherwise specified. Typical value is measured at TA = 25C.) Symbol Parameter Device Test Conditions Min. Typ. Max. 1.30 1.70 Unit EMITTER VF BVR VF / TA Input Forward Voltage All Input Reverse Breakdown Voltage All Temperature Coefficient All of Forward Voltage IF = 1.6 mA, TA = 25C IF = 1.6 mA IR = 10 A, TA = 25C 1.75 5.0 IF = 1.6 mA V 19.0 V -1.94 mV/C DETECTOR ICCL ICCH Logic Low Supply Current IF = 1.6 mA, VO = Open, 6N138M, VCC = 18 V 6N139M HCPL2730M VCC = 7 V IF1 = IF2 = 1.6 mA, HCPL2731M VCC = 18 V VO1 = VO2 = Open Logic High Supply Current IF = 0 mA, VO = Open, 6N138M, VCC = 18 V 6N139M HCPL2730M VCC = 7 V IF1 = IF2 = 0 mA, HCPL2731M VCC = 18 V VO1 = VO2 = Open Transfer Characteristics Symbol Parameter Device Test Conditions 0.4 1.5 1.25 3 0.0003 10 mA A 0.0003 Min. Typ. 20 Max. Unit COUPLED 6N138M IF = 1.6 mA, VO = 0.4 V, HCPL2730M VCC = 4.5 V CTR Current Transfer Ratio(3)(4) 6N139M IF = 0.5 mA, VO = 0.4 V, HCPL2731M VCC = 4.5 V 6N139M IF = 1.6 mA, VO = 0.4 V, HCPL2731M VCC = 4.5 V 6N138M IOH Logic High Output Current HCPL2730M 6N139M HCPL2731M IF = 0 mA, VO = VCC = 7 V IF = 0 mA, VO = VCC = 18 V IF = 1.6 mA, IO = 4.8 mA, HCPL2730M VCC = 4.5 V VOL Logic Low Output Voltage(4) 400 500 1600 2400 2000 % 3500 1600 2400 0.001 250 A 6N138M 6N139M 300 IF = 0.5 mA, IO = 2 mA, VCC = 4.5 V 6N139M IF = 1.6 mA, IO = 8 mA, HCPL2731M VCC = 4.5 V 6N139M IF = 5 mA, IO = 15 mA, HCPL2731M VCC = 4.5 V 6N139M IF = 12 mA, IO = 24 mA, HCPL2731M VCC = 4.5 V 0.0036 0.06 0.05 0.05 0.093 0.08 0.13 0.12 0.18 0.17 100 0.4 0.4 0.4 V 0.4 0.4 Notes: 3. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 4. Pin 7 open. (6N138M and 6N139M only) (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 4 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Electrical Characteristics (VCC = 5.0 V, TA = 0C to 70C unless otherwise specified. Typical value is measured at TA = 25C.) Switching Characteristics Symbol Parameter Device Propagation Delay Time to Logic LOW(4) (Fig. 15) Max. Unit 0.2 2 0.5 3 6N138M RL = 2.2 k, IF = 1.6 mA 1.0 15 HCPL2730M, RL = 2.2 k, IF = 1.6 mA HCPL2731M 2.5 25 RL = 4.7 k, IF = 0.5 mA 2.5 30 HCPL2731M RL = 4.7 k, IF = 0.5 mA 8.4 120 RL = 270 , IF = 12 mA 1.3 10 HCPL2730M, RL = 270 , IF = 12 mA HCPL2731M 1.0 15 6N138M, HCPL2730M, RL = 2.2 k, IF = 1.6 mA HCPL2731M 7.3 50 6N139M, RL = 4.7 k, IF = 0.5 mA HCPL2731M 13.6 90 6N139M tPLH Typ. RL = 270 , IF = 12 mA 6N139M Propagation Delay Time to Logic HIGH(4) (Fig. 15) Min. HCPL2730M, RL = 270 , IF = 12 mA HCPL2731M 6N139M tPHL Test Conditions s s |CMH| Common Mode Transient Immunity All at Logic High(5) (Fig. 16) IF = 0 mA, lVCMl = 10 VP-P, RL = 2.2 kTA = 25C 1,000 10,000 V/s |CML| Common Mode Transient Immunity All at Logic Low(5) (Fig. 16) IF = 1.6 mA, lVCMl = 10 VP-P, RL = 2.2 kTA = 25C 1,000 10,000 V/s Note: 5. Common mode transient immunity in logic HIGH level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic HIGH state (i.e., VO > 2.0 V). Common mode transient immunity in logic LOW level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic LOW state (i.e., VO < 0.8 V). (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 5 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Electrical Characteristics (Continued) Isolation Characteristics (TA = 25C unless otherwise specified.) Symbol Parameter Device Test Conditions VISO Withstand Insulation Test Voltage(6)(7) All RH 50%, TA = 25C, II-O 10 A, t = 1 min, f = 50 Hz RI-O Resistance (Input to Output)(6) All VI-O = 500 VDC CI-O Capacitance (Input to Output)(6)(8) All f = 1 MHz, VI-O = 0 V II-I Input-Input Insulation Leakage Current(9) RI-I CI-I Min. Typ. 5,000 Max. Unit VACRMS 1011 1 pF HCPL2730M, RH 45%, VI-I = 500 VDC, HCPL2731M t = 5 sec 0.005 A Input-Input Resistance(9) HCPL2730M, VI-I = 500 VDC HCPL2731M 1011 Input-Input Capacitance(9) HCPL2730M, f = 1 MHz HCPL2731M 0.03 pF Notes: 6. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 7. 5000 VACRMS for 1 minute duration is equivalent to 6000 VACRMS for 1 second duration. 8. For dual channel devices, CI-O is measured by shorting pins 1 and 2 or pins 3 and 4 together and pins 5 through 8 shorted together. 9. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 6 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Electrical Characteristics (Continued) TA = 25C unless otherwise specified Current Limiting Resistor Calculations 5 1RQ,QYHUW 9&&9')92/ ,) R2 () @ OUTPUT CONFIGURATION INPUT R1 () CMOS CMOS CONFIGURATION 74XX 74LXX 74SXX 74LSXX 74HXX @ 5 V @ 10 V 5 ,QYHUW 9&&92+9') ,) 5 9&&92/; #,/, ,/ Where: V&&1 = Input Supply Voltage CMOS @5V NON-INV. 2000 CMOS @ 10 V NON-INV. 5100 74XX V&&2 = Output Supply Voltage 74LXX VDF = Diode Forward Voltage VOL1 = Logic "0" Voltage of Driver 74SXX VOH1 = Logic "1" Voltage of Driver IF = Diode Forward Current 74LSXX VOLX =Saturation Voltage of Output Transistor IL = Load Current Through Resistor R2 74HXX INV. INV. INV. 180 NON-INV. 1800 INV. 100 1000 2200 750 1000 1000 560 NON-INV. 2000 INV. 360 NON-INV. 2000 INV. 180 NON-INV. 2000 INV. 180 V&&2 1 8 2 7 3 6 V&&2 R2 IN 5 Fig. 4 Non-Inverting Logic Interface (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 1 8 2 7 3 6 4 5 R2 OUT R1 OUT 4 1000 Fig. 3 Resistor Values for Logic Interface V&&1 R1 4700 NON-INV. 2200 I2 = Input Current of Output Gate IN 510 Fig. 5 Inverting Logic Interface www.fairchildsemi.com 7 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Electrical Characteristics (Continued) 100 1.6 IF = 1.6 mA TA = 110C FORWARD VOLTAGE - VF (V) FORWARD CURRENT - IF (mA) TA = 100C 10 TA = 85C TA = 70C 1 TA = 25C 0.1 TA = 0C TA = -40C 1.5 1.4 1.3 1.2 0.01 1.0 0.001 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 -40 -20 FORWARD VOLTAGE - VF (V) Fig. 6 LED Forward Current vs. Forward Voltage NCTR - NORMALIZED CURRENT TRANSFER RATIO (%) CURRENT TRANSFER RATIO - CTR (%) VCC = 5 V VO = 0.4 V TA = 85C TA = 100C 2500 TA = 70C TA = 110C 2000 TA = 25C 1500 TA = 0C 1000 500 TA = -40C 0 0.01 0.1 1 10 40 60 80 100 1.4 IF = 1.6 mA VCC = 4.5 V VO = 0.4 V Normalized to TA = 25C 1.2 1.0 0.8 0.6 0.4 -40 100 -20 0 20 40 60 80 100 TEMPERATURE - TA (C) IF - FORWARD CURRENT (mA) Fig. 9 Normalized Current Transfer Ratio vs. Ambient Temperature (6N138M / 6N139M Only) Fig. 8 Current Transfer Ratio vs. Forward Current (6N138M / 6N139M Only) 100 2400 2000 IO - OUTPUT CURRENT (mA) CTR - CURRENT TRANSFER RATIO (%) 20 Fig. 7 LED Forward Voltage vs. Temperature 3500 3000 0 TEMPERATURE - TA (C) 1600 1200 800 400 10 TA = 70C / 85C / 100C / 110C TA = 25C 1 TA = 0C TA = -40C 0 VCC = 5 V VO = 0.4 V IF = 1.6 mA VCC = 5 V VO = 0.4 V 0 0.01 0 1 10 100 1000 RBE - BASE RESISTANCE (k) 1 10 Fig. 11 Output Current vs. Input Diode Forward Current (6N138M / 6N139M Only) Fig. 10 Current Transfer Ratio vs. Base-Emitter Resistance (6N138M / 6N139M Only) (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 0.1 IF - INPUT DIODE FORWARD CURRENT (mA) www.fairchildsemi.com 8 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Typical Performance Curves 7 IO - OUTPUT CURRENT (mA) VCC = 5 V TA = 25C ICCL - LOGIC LOW SUPPLY CURRENT (mA) 100 Limit of safe operating region 80 4 mA 5 mA 4.5 mA 3.5 mA 60 3 mA 2.5 mA 40 2 mA 1.5 mA 20 1 mA 0.5 mA 6 5 4 VCC = 18 V 3 VCC = 5 V 2 1 0 0 0 0 1 2 4 6 8 10 12 14 16 2 IF - FORWARD CURRENT (mA) VO - OUTPUT VOLTAGE (V) Fig. 13 Logic Low Supply Current vs. Input Diode Forward Current (6N138M / 6N139M Only) Fig. 12 Output Current vs Output Voltage (6N138M / 6N139M Only) 50 tP - PROPAGATION DELAY (s) VCC = 5 V 40 30 tPLH ( IF =0.5 mA, RL= 4.7 k) 20 tPLH ( IF =1. mA, RL= 2.2 k) 10 tPHL ( IF = 0.5 mA, RL = 4.7k) tPHL ( IF = 1. mA, RL = 2.2k) 0 -40 -40 0 20 40 60 80 100 TA - TEMPERATURE (C) Fig. 14 Propagation Delay vs. Temperature (6N138M / 6N139M Only) (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 9 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Typical Performance Curves (Continued) Pulse Generator tr = 5 ns Z O = 50 IF 10% Duty Cycle I/ < 100 s 1 Noise Shield 8 2 7 3 6 VCC VB Pulse Generator tr = 5 ns Z O = 50 10% Duty Cycle I/ < 100 s +5 V Noise Shield + IF 1 8 VF1 - RL 2 7 3 6 4 5 VCC +5 V RL V01 0.1 F VO VF VO VO IF MONITOR 0.1 F I F Monitor 4 Rm 5 VF2 + Rm C L = 15 pF* GND Test Circuit for 6N138M, 6N139M C L = 15 pF* V02 GND Test Circuit for HCPL2730M and HCPL2731M IF 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 15 Switching Time Test Circuit IF 1 Noise Shield 8 2 A B 7 VCC + +5 V IF VB Noise Shield 1 8 VCC VF1 - RL +5 V RL 2 7 V01 A VF 3 6 B VO VO 0.1 F VFF 4 5 + GND - VFF 3 6 4 5 VF2 + - V02 VO 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for 6N138M and 6N139M Test Circuit for HCPL2730M and HCPL2731M VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at B : I F = 1.6 mA Fig. 16 Common Mode Immunity Test Circuit (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 10 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Test Circuits 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 8 minutes max. www.fairchildsemi.com 11 Part Number Package Packing Method 6N138M DIP 8-Pin Tube (50 units per tube) 6N138SM SMT 8-Pin (Lead Bend) Tube (50 units per tube) 6N138SDM SMT 8-Pin (Lead Bend) Tape and Reel (1,000 units per reel) 6N138VM DIP 8-Pin, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N138SVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N138SDVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option Tape and Reel (1,000 units per reel) 6N138TVM DIP 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N138TSVM SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N138TSR2VM SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tape and Reel (1,000 units per reel) Note: The product orderable part number system listed in this table also applies to the 6N139M, HCPL2730M and HCPL2731M product families. Marking Information 1 V 3 6N138 2 XX YY B 6 5 4 Figure 17. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 Two Digit Year Code, e.g., `16' 5 Two Digit Work Week Ranging from `01' to `53' 6 Assembly Package Code (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 12 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Ordering Information D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 0.3 Tape Thickness 0.30 0.05 P0 Sprocket Hole Pitch D0 Sprocket Hole Diameter 1.55 0.05 4.0 0.1 E Sprocket Hole Location 1.75 0.10 F Pocket Location 7.5 0.1 P Pocket Pitch 12.0 0.1 A0 Pocket Dimensions 2.0 0.1 P2 10.30 0.20 10.30 0.20 B0 4.90 0.20 K0 W1 d R Cover Tape Width 13.2 0.2 Cover Tape Thickness 0.1 max Max. Component Rotation or Tilt 10 Min. Bending Radius 30 (c)2009 Fairchild Semiconductor Corporation 6N138M, 6N139M, HCPL2730M, HCPL2731M Rev. 1.5 www.fairchildsemi.com 13 6N138M, 6N139M, HCPL2730M, HCPL2731M -- 8-Pin DIP Low Input Current High Gain Split Darlington Optocouplers Carrier Tape Specifications (Option SD) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com